GOST 31844-2012
ГОСТ 31844-2012
|
|
Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical equipments
Нефтяная и газовая промышленность. Оборудование буровое и эксплуатационное. Оборудование подъемное. Общие технические требования
Status: Effective - Introduced for the first time. IUS 11-2013
This standard establishes requirements for the design, manufacture and quality control of equipment for tripping operations performed during drilling and operation of oil and gas wells. It applies to the following mechanisms, components and parts of lifting equipment: - pulley pulley mechanisms; - blocks talevy and hook blocks; - Hook suspension units for the traveling block; - elements connecting and transitional elevator strop; - drill hooks; - hooks for tubing and sucker rods; - elevator bails; - Elevators for casing, tubing, drill and weighted drill pipes; - Elevators for pump rods; - elements of transitional swivel; - swivels; - power swivels; - rotators; - spider-elevators; - devices for fixing the fixed end of the pulley rope; - Compensators vertical movement of the drill string; - rotators for screwing the lead pipe, used as lifting equipment; - pressure vessels and pipelines mounted on lifting equipment; - safety clamps used as lifting equipment; - guides carriage
Настоящий стандарт устанавливает требования при проектировании, изготовлении и контроле качества оборудования для спускоподъемных операций, выполн��емых при бурении и эксплуатации нефтяных и газовых скважин. Распространяется на следующие механизмы, узлы и детали спускоподъемного оборудования: - шкивы талевых механизмов; - блоки талевые и крюкоблоки; - узлы подвески крюка к талевому блоку; - элементы соединительные и переходные штропов элеватора; - крюки буровые; - крюки для насосно-компрессорных труб и насосных штанг; - штропы элеватора; - элеваторы для обсадных, насосно-компрессорных, бурильных и утяжеленных бурильных труб; - элеваторы для насосных штанг; - элементы переходные штропа вертлюга; - вертлюги; - силовые вертлюги; - вращатели; - спайдеры-элеваторы; - устройства крепления неподвижного конца талевого каната; - компенсаторы вертикальных перемещений бурильной колонны; - вращатели для навинчивания ведущей трубы, используемые как спускоподъемное оборудование; - сосуды под давлением и трубопроводы, смонтированные на спускоподъемном оборудовании; - предохранительные хомуты, используемые в качестве спускоподъемного оборудования; - направляющие каретки
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/21/2012
SKU: RUSS72698
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
75 Extraction and processing of oil, gas and related production »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Welding materials »
Welding regulations »
Admission Testing »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Gases »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.180 Equipment for oil and gas industry »
75.180.20 Equipment for oil and gas processing »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.180 Equipment for oil and gas industry »
75.180.20 Equipment for oil and gas processing »
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 1.2-2009: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Rules for development, taking over, application, renovation and cancellation
GOST 10145-81: Metals. Stress-rupture test method
GOST 10446-80: Wire. Tensile test method
GOST 11150-84: Metals. Methods of tension tests at low temperatures
GOST 11533-75: Automatic and semiautomatic submerged arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon
GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination
GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination
GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus
GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination
GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten
GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination
GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium
GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel
GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination
GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum
GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination
GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium
GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium
GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic
GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen
GOST 12503-75: Steel Methods of ultrasonic control. General requirements
GOST 14019-2003: Metallic materials. Bend test method
GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation
GOST 1497-42: Metals. Tensile metal test methods
GOST 1497-84: Metals. Methods of tension test
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
GOST 16853-88: Steel tackle ropes for operational and deep probe boring. Specifications
GOST 18353-79: Non-destructive check. Classification of types and methods
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 19521-74: Welding of metals
GOST 20426-82: Radiation methods of defectoscopy
GOST 21105-87: Non-destructive testing. Method of magnetic particle testing
GOST 21357-87: Castings made of cold- and wear- resistant steel
GOST 2387-80: Steel ropes. Method endurance tester
GOST 23979-80: Subs for pump-and-compressor tubing
GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection
GOST 25225-82: Non-destructive testing. Welded joints of tubing. Magnetographic method
GOST 25468-82: Equipment for lifting and lowering operations and pivots. Connecting dimensions
GOST 2601-44: Welding of metals. Terminology
GOST 2601-84: Welding of metals. Terms and definitions of basic concepts
GOST 27750-88: Restoring coatings. Coating thickness control methods
GOST 27947-88: Non-destructive testing. Tv radiographic method. General requirements
GOST 28870-90: Steel. Methods tensile tests of rolled thick-plates in the thickness direction
GOST 5286-75: Tool joints for pipe drills
GOST 550-41: Pipes steel for cracking
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 631-75: Upset drill pipes with couplings
GOST 632-80: Casing pipes and couplings for them. Specifications
GOST 633-41: Oil well tubing and tubing couplings
GOST 633-80: Oil well tubing and tubing couplings
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7360-82: Subs for drilling strings
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST 9651-84: Metals. Methods of tension tests at elevated temperatures
GOST 977-41: Castings made of carbon steel. Classification and specifications
GOST 977-88: Steel castings. General specifications
GOST ISO 9001-2011: Quality management systems. Requirements
GOST R 51906-2002: Thread connections for casing, tubing and pipe-lines and thread gauges for them. General technical requirements
GOST R 52857.10-2007: Vessels and apparatus. Norms and methods of strength calculation. Vessels and apparatus involving hydrogen sulphide media
GOST R 52857.11-2007: Vessels and apparatus. Norms and methods of strength calculation. Method of strength calculation of shells and heads according to weld misalignment, angular misalignment and shell nonroundness
GOST R 52857.1-2007: Vessels and apparatus. Norms and methods of strength calculation. General requirements
GOST R 52857.12-2007: Vessels and apparatus. Norms and methods of strength calculation. Requirements for representation of the strength calculations carried out on the computer
GOST R 52857.2-2007: Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindric and conic, shells convex and flat bottoms and covers
GOST R 52857.3-2007: Vessels and apparatus. Norms and methods of strength calculation. Reinforcement of openings in shells and heads under internal and external pressure. Strength calculation of shells and heads under external static loads on the nozzle
GOST R 52857.4-2007: Vessels and apparatus. Norms and methods of strength calculation. Stength and leak-tightness calculation of flange joints
GOST R 52857.5-2007: Vessels and apparatus. Norms and methods of strength calculation. Calculation of shells and heads from influence of support loads
GOST R 52857.6-2007: Vessels and apparatus. Norms and methods of strength calculation. Strength calculation under low-cyclic loads
GOST R 52857.7-2007: Vessels and apparatus. Norms and methods of strength calculation. Heat-exchangers
GOST R 52857.8-2007: Vessels and apparatus. Norms and methods of strength calculation. Jacketed vessels and apparatus
GOST R 52857.9-2007: Vessels and apparatus. Norms and methods of strength calculation. Determination of stresses at nozzle-to-shell and head junctions under action of pressure and external loads on the nozzle
GOST R 53464-2009: Metal and alloy castings. Dimensions and mass tolerances and machining allowances
GOST R 53683-2009: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical rudiments
GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
PB 03-273-99: Rules for qualification test of welders and welding production specialists
PB 03-440-02: Attestation rules for nondestructive inspection personnel
PB 03-576-03: Regulations of design and safe operation of pressure vessels
PB 03-584-03: Rules of design, manufacturing and acceptance of welded steel vessels and apparatuses
RD 03-615-03: Order of welding technologies application at engineering devices production, installation, repair and reconstruction for unsafe industrial objects.
The Document is Referenced By:
GOST R 58367-2019: Arrangement of oil fields on land. Technological design
PNST 615-2022: Oil and gas industry. Underwater production systems. Completion and workover system. Guidelines
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
