GOST R 12.1.031-2010
ГОСТ Р 12.1.031-2010
|
|
Occupational safety standards system. Lasers. Methods of dosimetric control of laser radiation
Система стандартов безопасности труда. Лазеры. Методы дозиметрического контроля лазерного излучения
Status: Effective - Introduced for the first time. IUS 4-2012
This standard establishes methods for determining the degree of danger of laser radiation for the human body, based on the measurement of radiation parameters in the workplaces of laser installation operators. The standard should be applied in conjunction with GOST 12.1.040, GOST R 50723, Sanitary norms and rules [1]
Настоящий стандарт устанавливает методы определения степени опасности лазерного излучения для организма человека, основанные на измерении параметров излучения на рабочих местах операторов лазерных установок. Стандарт следует применять совместно с ГОСТ 12.1.040, ГОСТ Р 50723, Санитарными нормами и правилами [1]
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/12/2010
SKU: RUSS72705
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
31 Electronics »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
6 Protection against electromagnetic radiation »
6.1 Non-ionizing electromagnetic fields and radiation »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.2 Equipment and apparatus for radio, television and communication »
ISO classifier »
31 ELECTRONICS »
31.260 Optoelectronics. Laser equipment »
National standards »
31 ELECTRONICS »
31.260 Optoelectronics. Laser equipment »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 12.1.040-83: Occupational safety standards system. Laser safety. General
GOST 12.2.007.3-75: Occupational safety standard system. Electrotechnical devices for voltage more than 1 000 v
GOST 12.2.032-78: Operators location in a silting position. General ergonomic requirements
GOST 12.2.033-78: Operators location in a standing position General ergonomic requirements
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.4.013-85: Occupational safety standards system. Goggles. General specification
GOST 24453-80: Laser parameter and characteristic measurements. Terms, definitions and letter symbols
GOST 24469-80: Instruments for measurements of laser radiation parameters
GOST 26148-84: Photometry. Terms and definitions
GOST 26387-84: Man-machine system. Terms and definitions
GOST 5378-88: Vernier protractors. Specifications
GOST 8.009-84: State system for ensuring the uniformity of measurements. Standardized metrological characteristics of measuring instruments
GOST 8.207-76: Direct measurements with multiple observations. Observation data processing methods
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 50723-94: Laser safety. General requirements for development and operation the laser products
POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations
RMG 43-2001: State system for ensuring the uniformity of measurements. The use of
The Document is Referenced By:
GOST 31581-2012: Laser safety. General safety requirements for development and operation of laser products
GOST R 8.705-2010: State system for ensuring the uniformity of measurements. Embedded and external photometers for high-energy laser medical apparatus. Verification procedure
GOST R 8.706-2010: State system for ensuring the uniformity of measurements. Embedded and external photometers for laser therapeutic apparatus. Method of verification
GOST R 8.721-2010: State system for ensuring the uniformity of measurements. Medical biofotometrs. Verification procedure
MI LI.INT-13.01-2018: The method of measuring the parameters of laser radiation for the purpose of a special assessment of working conditions
MP 039.M7-19: State system for ensuring uniformity of measurements. Photodiode radiation receivers PDP. Verification Method
MP 040.M4-19: State system for ensuring uniformity of measurements. Spectro2guide spectrophotometers, spectro2guide d: 8 degrees, spectro2guide 45 degrees, c: 0 degrees. Verification method
MR 2.2.4.0115-16: Safety assessment using laser projectors
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
