GOST R 53442-2009
ГОСТ Р 53442-2009
|
|
Basic norms of interchangeability. Geometrical product specifications. Tolerances of form, orientation, location and run-out
Основные нормы взаимозаменяемости. Характеристики изделий геометрические. Допуски формы, ориентации, месторасположения и биения
Status: Not effective - Superseded. Information about the registration of 1115-st dated 08/10/2015 (the official website of the FSUE "Standartinform"); IUS 4-2016
This standard applies to the rationing of the geometric characteristics of products and establishes the definitions and rules for indicating on the drawings the tolerances of form, orientation, location and beating.
Настоящий стандарт распространяется на нормирование геометрических характеристик изделий и устанавливает определения и правила указания на чертежах допусков формы, ориентации, месторасположения и биения
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/4/2009
SKU: RUSS72778
The Product is Contained in the Following Classifiers:
Standards for pipe fittings (TPA) »
8. Piping valves (TPA) design »
8.1 General design issues piping valves (TPA) »
8.1.2 Interchangeability and other design requirements »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.2 Instruments for measuring pressure, volume, flow, level, time and mechanical quantities »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.01 Linear and angular measurements in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.01 Linear and angular measurements in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G0 General rules and regulations for engineering »
G02 Norms of calculation and design »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Tolerances and landings. Surface cleanliness »
The Document is Replaced With:
GOST R 53442-2015: Basic norms of interchangeability. Geometrical product specifications. Geometrical tolerance. Tolerances of form, orientation, location and run-out
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 2.308-79: Unified system for design documentation. Representation of limits of forms and surface lay-out on drawings
GOST 30987-2003: Basic norms of interchangeability. Dimensioning and tolerancing for non-rigid parts
GOST 31254-2004: Вasic norms of interchangeability. Geometrical features. General terms and definitions
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 1.5-2004: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of structure, drafting, presentation and indication
GOST R 53089-2008: Basic norms of interchangeability. Geometrical product specifications. Positional tolerancing
GOST R 53090-2008: Basic norms of interchangeability. Geometrical product specifications. Maximum material requirement, least material requirement and reciprocity requirement
The Document is Referenced By:
GOST 13547-2015: Pipeline valves. Butterfly wicket valves. General specifications
GOST 1452-2011: Helical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications
GOST 2.308-2011: Unified system of design documentation. Representation of limits of forms and surface lay-out on drawings
GOST 3.1128-93: The unified system of technological documentation. General rules for drawing up of graphical technological documents
GOST 31294-2005: Direct-acting safety valves. General specifications
GOST 33423-2015: Pipeline valves. Swing and lift check valves. General specifications
GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications
GOST ISO 4759-1-2015: Tolerances for fasteners. Part 1. Иolts, screws, studs and nuts. Product grades A, B and C
GOST ISO 4759-3-2015: Fasteners. Tolerances. Part 3. Washers, flat for bolts, screws and nuts. Product grades A and C
GOST R 51685-2013: Railway rails. General specifications.
GOST R 51906-2015: Thread connections for casing, tubing, line pipe and thread gauges for them. General technical requirements
GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.
GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements
GOST R 55145-2012: Basic norms of interchangeability. Geometrical product specifications. Dimensioning and tolerancing for non-rigid parts
GOST R 58195-2018: Internal combustion engines. Piston pins. Part 2. Inspection measuring principles
GOST R 60.3.4.1-2017: Robots and robotic devices. Manipulating industrial robots. Mechanical interfaces. Plates
GOST R 60.3.4.2-2017: Robots and robotic devices. Manipulating industrial robots. Mechanical interfaces. Shafts
GOST R ISO 12164-3-2011: Hollow taper shank of tools (HSK). Types T. Basic dimensions
GOST R ISO 12164-4-2011: Tool receiver for type T hollow taper shanks (HSK). Connecting dimensions
GOST R ISO 4759-1-2009: Tolerances for fasteners. Part 1: bolts, screws, studs and nuts. Product grades A, B and C
GOST R ISO 4759-3-2009: Tolerances for fasteners – Part 3: plain washers for bolts, screws and nuts – product grades A and C
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
