GOST R 55607-2013
ГОСТ Р 55607-2013
|
|
Electrical equipment (installations) for power supply systems of machines and devices In open-pit mining. General specifications
Электрооборудование и электроустановки для систем электроснабжения машин и механизмов открытых горных работ. Общие технические условия
Status: Effective - Introduced for the first time. IUS 8-2014
This standard applies to special-purpose electrical equipment of stationary and mobile execution, designed for use in power supply systems of open-cast machines and mechanisms in various industries (ore mines, coal mines, etc.) in harsh conditions of mobile nature, high vibration and shock impacts, high ambient air dustiness and establishes general technical conditions. The specified electrical equipment can also be used in general industrial power supply schemes, in construction, and agriculture, where the use of electrical equipment of increased mechanical strength and resistance to external influencing factors is required. This standard does not apply to cables and wires, as well as to electrical equipment for work in hazardous areas and environments.
Настоящий стандарт распространяется на электрооборудование специального назначения стационарного и передвижного исполнения, предназначенное для применения в системах электроснабжения машин и механизмов открытых горных работ различных отраслей промышленности (рудные карьеры, угольные разрезы и т.д.) в тяжелых условиях подвижного характера работ, высоких вибрационных и ударных воздействий, большой запыленности окружающего воздуха и устанавливает общие технические условия. Указанное электрооборудование может также использоваться в общепромышленных схемах электроснабжения, в строительстве, сельском хозяйстве, где требуется применение электрооборудования повышенной механической прочности и устойчивости к внешним воздействующим факторам. Настоящий стандарт не распространяется на кабели и провода, а также на электрооборудование для работы во взрывоопасных помещениях и средах
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
9/6/2013
SKU: RUSS72810
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.260 Electrical equipment for working in special conditions »
29.260.01 Electrical equipment for work in special conditions in general »
National standards »
29 ELECTRICAL ENGINEERING »
29.260 Electrical equipment for working in special conditions »
29.260.01 Electrical equipment for work in special conditions in general »
The Document References:
GOST 10434-82: Electric contact connections. Classification. General technical requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.007.3-75: Occupational safety standard system. Electrotechnical devices for voltage more than 1 000 v
GOST 12.2.007.4-75: Cabinets for switchgear and control gear and unitized transformer substations
GOST 12434-83: Low-voltage switching devices. General specifications
GOST 12969-67: Plates for machines and devices. Technical requirements
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 14192-96: Cargo marking
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 14693-90: Unsealed metal-enclosed switchgear
GOST 14695-80: Compact unit substations
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 1516.3-96: Electrical equipment for a.c. voltages from 1 to 750 kV. Requirements for dielectric strength of insulation
GOST 15543.1-89: Electrical articles. General requirements for environmental climatic aspects stability
GOST 15963-79: Electrical articles for tropical application. General technical requirements and methods of testing
GOST 16962-71: Electronic and electrical equipment. Mechanical and climatic influence. Requirements and test methods
GOST 17412-72: Electrical articles for the cold climate regions. Technical requirements, acceptance and test methods
GOST 17516.1-90: Electrical articles. General requirement for environment mechanical stability
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 21130-75: Electrical articles. Grounding terminals and grounding signs
GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods
GOST 24754-81: General purpose mining electric equipment
GOST 29149-91: Colours of indicator lights and push-buttons
GOST 2933-83: Low-voltage electrical apparatus. Methods of tests
GOST 8024-90: Alternating current apparatus and devices for voltages above 1000 V. Temperature rise at continuous duty. Norms and test methods
GOST 9920-89: A.c. electrical installations for voltage from 3 to 750 kV. Creepage distance of external insulation
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
GOST R 51321.1-2007: Low-voltage switchgear and control gear assemblies. Part 1. Type-tested and partially type-tested assemblies. General technical requirements and test methods
GOST R 51330.20-99: Mining electrical equipment. Insulation, leakage paths and electrical gaps. Technical requirements and testing methods
GOST R 51908-2002: General requirements for machines, instruments and other industrial products as to storage and transporting conditions
GOST R 52565-2006: Alternating-current circuit-breakers for voltages from 3 to 750 kV. General specifications
PB 03-498-02: Uniform Safety Requirements for Underground Development of Mineral Deposits Using Opencast Method
PB 05-619-03: Safety Requirements for Development of Coal Deposits by Opencast Method
POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations
RD 05-334-99: Safety standards for electrical installations of coal mines and requirements for their safe operation
RD 06-572-03: Instructions for the safe operation of electrical installations in the mining industry
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
