imgalt

GOST 31841-2012

ГОСТ 31841-2012

Petroleum and natural gas industries. Well service equipment. General technical requirements

Нефтяная и газовая промышленность. Оборудование для подземного ремонта скважин. Общие технические требования

Status: Effective - Introduced for the first time. IUS 11-2013

This standard sets forth the principles and establishes the requirements for the design, production and testing of equipment for underground repair of wells and identical drilling equipment, as well as for the replacement of the main bearing components manufactured after the introduction of this standard. tables; b) rotor liners; c) dies for clamping drill pipes in the rotor; d) details of piston drilling pumps; e) details of the drawworks; e) spiders (clamping clamps) not used as elevators; g) manual pipe wrenches; h) safety clamps not used as lifting devices; i) driving pipe wrenches, including drilling wrenches

Настоящий стандарт излагает принципы и устанавливает требования к конструкции, производству и испытаниям оборудования для подземного ремонта скважин и идентичного бурового оборудования, а также к замене основных несущих компонентов, изготовленных после введения в действие настоящего стандарта.Настоящий стандарт применяют для следующих видов оборудования: а) роторные столы; б) вкладыши ротора; в) плашки для зажима бурильных труб в роторе; г) детали поршневых буровых насосов; д) детали буровых лебедок; е) спайдеры (зажимные хомуты), не используемые в качестве элеваторов; ж) ручные трубные ключи; з) предохранительные хомуты, не используемые в качестве подъемных устройств; и) приводные трубные ключи, включая буровые ключи

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 11/21/2012

SKU: RUSS72860

Price: $869.00



imgalt

The Product is Contained in the Following Classifiers:

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Metal structures »

Welding regulations » Welding materials »

Welding regulations » Admission Testing »

Welding regulations » Certification »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Welding work » Automatic welding »

Welding regulations » Welding work » Dusting »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Welding materials » Electrodes »

Welding regulations » Welding materials » Wire »

Welding regulations » Welding materials » Fluxes »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.200 Equipment for oil refining, oil products and natural gas »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.200 Equipment for oil refining, oil products and natural gas »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.200 Equipment for oil refining, oil products and natural gas » 75.200.01 Transportation and storage in general »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.200 Equipment for oil refining, oil products and natural gas » 75.200.01 Transportation and storage in general »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G4 Machinery and equipment for heavy industry » G43 Machines and equipment for oil producing, oil refining and gas industry »


The Document References:

GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions

GOST 10145-81: Metals. Stress-rupture test method

GOST 11150-84: Metals. Methods of tension tests at low temperatures

GOST 11533-75: Automatic and semiautomatic submerged arc welding. Acute and blunt weld joints. Main types, design elements and dimensions

GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic

GOST 12358-82: Steels alloyed and highalloyed. Methods for the determination of arsinic

GOST 12359-81: Steels carbon, alloyed and highalloyed. Methods for the determination of nitrogen

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 12503-75: Steel Methods of ultrasonic control. General requirements

GOST 14019-2003: Metallic materials. Bend test method

GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 1497-84: Metals. Methods of tension test

GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions

GOST 16532-70: Cylindrical involute external gear pairs. Calculation of geometry

GOST 18442-80: Non-destructive testing. Capillary methods. General requirements

GOST 18854-94: Rolling bearings. Static lood ratings

GOST 18855-94: Rolling bearings. Dinamic load ratings and rating life

GOST 19521-74: Welding of metals

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 2.610-2006: Unified system for design documentation. Rules for making exploitative documents

GOST 20426-82: Radiation methods of defectoscopy

GOST 21105-87: Non-destructive testing. Method of magnetic particle testing

GOST 21354-87: Cylindrical evolvent gears of external engagment. Strength calculation

GOST 21357-87: Castings made of cold- and wear- resistant steel

GOST 2246-70: Welding steel wire. Specifications

GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection

GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 25225-82: Non-destructive testing. Welded joints of tubing. Magnetographic method

GOST 2601-84: Welding of metals. Terms and definitions of basic concepts

GOST 27947-88: Non-destructive testing. Tv radiographic method. General requirements

GOST 28870-90: Steel. Methods tensile tests of rolled thick-plates in the thickness direction

GOST 30415-96: Steel. Non-destructive testing of mechanical properties and microstructure of steel products by magnetic method

GOST 591-69: Chain transmission sprocket wheels for roller chains. Methods of calculation and construction of tooth profile and cutting tool form. Tolerances

GOST 6111-52: Conical pipe thread. Profile, basic dimensions and tolerances

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions

GOST 8724-2002: Basic norms of interchangeability. Metric screw threads. General plan

GOST 8724-81: Basic norms of interchangeability. Metric screw thread. Diameters and pitches

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9013-59: Metals. Method of measuring Rockwell hardness

GOST 9087-81: Welding melted fluxes

GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications

GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types

GOST 9651-84: Metals. Methods of tension tests at elevated temperatures

GOST R 50599-93: Welded steel vessels and apparatus under high pressure. Non-destructive control while the manufacturing and operating

GOST R 51906-2002: Thread connections for casing, tubing and pipe-lines and thread gauges for them. General technical requirements

GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles

The Document is Referenced By:

PNST 615-2022: Oil and gas industry. Underwater production systems. Completion and workover system. Guidelines

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!