GOST R 55078-2012
ГОСТ Р 55078-2012
|
|
Fiberglass reinforced thermosetting plastic pipes. Glass reinforced thermosetting plastics cylinder shells of chimney and flue-pipes. Specifications
Трубы из реактопластов, армированных стекловолокном. Царги стволов для дымовых и газоотводящих труб. Технические условия
Status: Effective - Introduced for the first time. IUS 5-2014
This standard establishes the requirements for glass fiber reinforced thermosetting reinforced plastics ((hereinafter referred to as tsorga) intended for use in the flue gas chimneys and exhaust pipes that allow gases, air-gas mixtures, smoke, having a temperature up to 180 ° C. This standard establishes the types, technical requirements, indicators and characteristics of the king, requirements for control methods, including the means and procedure for carrying out tests and measurements when determining the indicators and characteristics of the king
Настоящий стандарт устанавливает требования к царгам из реактопластов, армированных стекловолокном, (далее - царги) предназначенным для использования в газоотводящих стволах дымовых и вытяжных труб, обеспечивающих отвод газов, газовоздушных смесей, дыма, имеющих температуру до 180 °С. Настоящий стандарт устанавливает типы, технические требования, показатели и характеристики царг, требования к методам контроля, включая средства и порядок выполнения испытаний и измерений при определении показателей и характеристик царг
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/14/2012
SKU: RUSS72943
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.01 Pipelines and their components in general »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.01 Pipelines and their components in general »
The Document References:
GN 2.1.6.1338-03: Maximum allowable concentrations (MACs) of pollutants in the air of residential areas
GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air
GOST 11262-80: Plastics. Tensile strength test method.
GOST 11709-81: Metric screw threads in the range 1-180 mm diameters for the parts in plastics. Profile, basic dimensions and tolerances
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 12.4.028-76: Respirators шб-1 "lepestok"
GOST 12.4.068-79: Occupational safety standards system. Dermatologic personal safety means. Classification and general requirements
GOST 12.4.121-83: Industrial filtering gas-masks
GOST 12423-66: Plastics. Standard atmospheres for conditioning and testing specimens
GOST 14192-96: Cargo marking
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 166-89: Vernier callipers. Specifications
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 17302-71: Plastics. Method of test for shear strength
GOST 25346-89: Basic norms of interchangeability. Unified system of tolerances and fits. General, series of tolerances and fundamental deviations
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 30893.1-2002: Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
GOST 3749-77: Checking 90° squares. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4648-71: Plastics. Method of static bending test
GOST 4650-80: Plastics. Methods for the determination of water absorption
GOST 4651-82: Plastics. Compression test method
GOST 6507-90: Micrometers. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications
GOST 9550-81: Plastics. Methods for determination of elasticity modulus at strength, compression and bending
GOST R 12.4.230.1-2007: Occupational safety standards system. Personal eyes protection means. General technical requirements
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 51672-2000: Metrological ensuring of product testing for the assurance of conformity. General principles
GOST R 54559-2011: Fibre reinforced thermosetting plastic pipes and parts of pipelines. Terms and definitions
Manual for SNiP 2.01.07-85: Recommendations for the appointment of aerodynamic coefficients in determining the wind load on the coatings of one-story buildings of industrial enterprises
MU 1719-77: Guidelines for the gravimetric determination of dust in the air of the working area and in the systems of ventilation systems
MU 4167-86: Methodological guidelines for gas chromatographic measurement of concentrations of gasoline, benzene, toluene, ethylbenzene, m-xylene, p-xylene, o-xylene, styrene, pseudocumene in the air of the working area
MU 4436-87: Measurement of aerosol concentrations of predominantly fibrogenic action
SanPiN 2.1.7.1322-03: Hygienic requirements regarding dumping and decontamination of industrial and consumable waste
SanPiN 2.2.4.1191-03: Physical factors of the production environment. Electromagnetic fields in production environment
SanPiN 2.2.4.548-96: Hygienic requirements to occupational microclimate
SN 2.2.4/2.1.8.562-96: Noise exposure in work environment, residential premises, premises of public buildings and in dwellings zones
SNiP 41-01-2003: Heating, Ventilation and Air Conditioning (HVAC)
SP 1.1.1058-01: Organization and procedures industrial monitoring of sanitary rules observance and sanitary epidemiological (preventive) measures
SP 2.1.7.1038-01: Hygiene requirements for the arrangement and maintenance of solid domestic waste disposal sites
SP 2.2.2.1327-03: Hygienic regulations for organization of technological processes, production equipment and working instrument
SP 20.13330.2011: Loads and impacts
Customers Who Viewed This Item Also Viewed:
|
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.