GOST 16338-85

ГОСТ 16338-85

Low-pressure polyethylene. Specifications

Полиэтилен низкого давления. Технические условия

Status: Effective - Supersedes. IUS 3-1986 $ The limitation of effectiveness period has been lifted: Minutes No. 2-92 of the IGU dated 05.10.92; IUS 2-1993

The standard applies to low pressure polyethylene (high density), obtained by suspension and gas-phase methods of polymerization of ethylene at low pressure on complex organometallic catalysts in suspension, and in the gas phase on complex supported organometallic catalysts, and sets requirements for polyethylene produced for the needs of the national economy for export delivery.

Стандарт распространяется на полиэтилен низкого давления (высокой плотности), получаемый суспензионным и газофазным методами полимеризации этилена при низком давлении на комплексных металлоорганических катализаторах в суспензии, а в газовой фазе накомплексных металлоорганических катализаторах на носителе, и устанавливает требования к полиэтилену, изготовляемому для нужд народного хозяйства и для поставки на экспорт.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 56

Approved: USSR State Committee for Standards, 12/20/1985

SKU: RUSS72963

Price: $475.00




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 83 Rubber, technical rubber, asbestos and plastic industries »

Standards for pipe fittings (TPA) » 9. Materials for piping valves (TPA) » 9.2 Polymer and composite materials »

ISO classifier » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.080 Plastics » 83.080.20 Thermoplastic materials »

National standards » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.080 Plastics » 83.080.20 Thermoplastic materials »

National Standards for KGS (State Standards Classification) » Latest edition » L Chemical products and rubber-asbestos products » L2 Organic Chemical Products » L27 Artificial resins and fiber, plastics and plasticizers »


As a Replacement Of:

GOST 16338-77: Low-pressure polyethylene. Specifications

The Document References:

GOST 11262-80: Plastics. Tensile strength test method.

GOST 11645-73: Plastics method of determination of melt flow index for thermoplastics

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12019-66: Plastics. Preparation of test specimens from thermoplasts. General requirements

GOST 12423-66: Plastics. Standard atmospheres for conditioning and testing specimens

GOST 1338-78: Organic dye-stuffs. Orange lacquer. Specifications

GOST 13518-68: Plastics. Method for determination of environmental stress-cracking resistance of polyethylene

GOST 14192-96: Cargo marking

GOST 14919-83: Household electric ranges, electric plates and electric frying ovens

GOST 15139-69: Plastics. Methods for the determination of density (mass density)

GOST 15973-82: Plastics. Methods for determination of ash

GOST 16782-92: Plastics. Determination of the brittleness temperature by impact

GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications

GOST 17711-93: Cast copper-zink alloys (brass). Grades

GOST 17811-78: Polyethylene bags for chemical products. Specifications

GOST 18300-87: Technical rectified ethyl alcohol. Specifications

GOST 18599-2001: Polyethylene pressure pipes. Specifications

GOST 18599-83: Polyethylene pressure pipes

GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements

GOST 2226-88: Paper bags

GOST 22372-77: Dielectric materials. Methods of determination of permittivity and power factor with in a frequency range of 100 to 5·10 in 6 degree Hz

GOST 22648-77: Plastics. Methods for determination of hygienic characteristics

GOST 24104-2001: Laboratory scales. General technical requirements

GOST 24104-88: General purpose and reference laboratory balances

GOST 24157-80: Plastic pipes. Method of determination of the resistance to constant internal pressure

GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions

GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions

GOST 25706-83: Magnifiers

GOST 25951-83: Thermoshrinking polyethylene film. Specifications

GOST 26311-84: Polyolefins. Method of determination of black content

GOST 26359-84: Polyethylene. Method for determination of volatile matters content

GOST 26380-84: Special groupage containers. Types, basic parameters and dimensions

GOST 2912-79: Chrome oxide technical. Technical conditions

GOST 5494-95: Pigmentary aluminium. Specifications

GOST 618-73: Aluminum foil for technical purposes. Specifications

GOST 6220-76: Organic dye-stuffs. Pigment blue phthalocyanine. Specifications

GOST 6433.1-71: Solid electrical insulating materials. Environmental conditions at preparation of samples and testing

GOST 6433.3-71: Solid electrical insulating materials. Methods for evaluation of electrical strength at a. c. voltage at power (50 Hz) frequency and d. c. voltage

GOST 6616-94: Thermoelectric converters. General specifications

GOST 7730-89: Cellulose film

GOST 7885-86: Industrial carbon for production of rubber

GOST 8433-81: Auxiliary substances OП-7 and OП-10. Specifications

GOST 8573-77: Organic dye-stuffs. Lacquer red ЖБ. Specifications

GOST 9808-84: Pigmentary titanium dioxide

GOST 982-80: Transformer oils

ST SEV 3659-82: Polyethylene. Designation

The Document is Referenced By:

GOST 10296-79: Isol-hydroinsulating material. Specifications

GOST 10597-87: Painting brishes. Specifications

GOST 10778-83: Spatulos. Specifications

GOST 10831-87: Paint rolls specification

GOST 11354-93: Returnable cases of wood and wood materials for food-stuffs and agricultural products. Specifications

GOST 1153-2019: Brackets for washbasins and sinks. Technical specifications

GOST 1153-76: Supports for lavatories and sinks. Technical requirements

GOST 11614-2019: Semi-automatic flush taps. Technical specifications

GOST 11614-94: Semi-automatic flushing valves. Specifications

GOST 12.4.087-84: Occupational safety standard system. Building. Building helmets. Specifications

GOST 12652-74: Electrotechnical glass-cloth-base laminate. Specifications

GOST 15062-83: W.c. bowl seats. Specifications

GOST 15899-93: 1,1,2,2,-tetrafluorodibromethane (khladon 114B2). Specifications

GOST 16360-70: Asbestic textolite Electrotechnical sheet. Specification

GOST 17358-80: Polymeric returnable boxes for bottles with food liquids. Specifications

GOST 17412-72: Electrical articles for the cold climate regions. Technical requirements, acceptance and test methods

GOST 17563-80: Buttons for fixing soft tapes in cabling. Design and dimensions

GOST 17678-80: Light cramps for pipe-line and cable fixing. Design and dimensions

GOST 17679-80: Light yokes for pipe-line and cable fixing. Design and dimensions

GOST 177-88: Hydrogen peroxide

GOST 1811-2019: Ladders for building sewage systems. Technical specifications

GOST 1811-97: Traps for sewer systems in buildings. Specifications

GOST 18599-2001: Polyethylene pressure pipes. Specifications

GOST 18599-83: Polyethylene pressure pipes

GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications

GOST 19596-87: Spades

GOST 19681-2016: Sanitary and technical water fittings. General specifications

GOST 19681-94: Sanitary technical water mixing and distributing accessories. General specifications

GOST 20054-2016: Concrete non-pressure pipes. Specifications

GOST 20-85: Rubber-fabric conveyor belts

GOST 21029-75: Aluminum barrels for chemical products

GOST 21133-87: Specialized box pallets for potatoes, vegetables, fruits, melons and gourds

GOST 21519-84: Windows, balcony doors, shop-windows and stained glass panels of aluminum alloys

GOST 22241-76: Transportation plugs. General specifications

GOST 22357-87: Figure skates. General specifications

GOST 22358-87: Racing and hockey skates. General specifications

GOST 22689.0-89: Polyethylene waste-pipes and fittings. General specification

GOST 22999-88: Portable hand-driven sprayers

GOST 23289-2016: Waste water drain sanitary accessories. Specification

GOST 23289-94: Waste water drain sanitary accessories. Specifications

GOST 23747-88: Doors of aluminium alloys. Specifications

GOST 23862.35-79: Rare-earth metals and their oxides. Methods of determination of sulphur, zinc, cerium and europium

GOST 25010-81: Howks for plastering. Specifications

GOST 25046-81: Disposable injection needles

GOST 25062-81: Windows and balcony doors of aluminium alloys. Types, constructions and dimensions

GOST 25165-82: Connections of SSI instruments and devices with external pneumatic lines. Types, basic parameters and dimensions. Technical requirements

GOST 25377-2015: Needles for injections for repeated use. Specifications

GOST 25483-95: Garden watering pots

GOST 25782-90: Derbies, floats, semifloats. Specifications

GOST 25812-83: Steel pipe mains. General requirements for corrosion protection

GOST 25930-83: Plastic covers for cylindrical connectors. Specifications

GOST 26215-84: Hand-held wood-saws

GOST 26584-85: Motorcycle helmets

GOST 2718-74: Synthetic resin bonded paper sheets for electrotechnical purposes. Specifications

GOST 27206-87: Compounds and products containing stable isotopes

GOST 27324-87: Returnable polymeric boxes. General specifications

GOST 28638-90: Bristle brush articles for household use. General specifications

GOST 2910-74: Electrotechnical flat-sheet laminate. Specifications

GOST 30732-2006: Steel pipes and shaped products with foamed polyurethane thermal insulation in protective sheath. Specifications.

GOST 30777-2001: Turned, reclined and turned-reclined devices for windows and balcony doors. Specifications

GOST 30777-2012: Turned, reclined, turned-reclined and sliding devices for windows and balcony doors. Specifications

GOST 32583-2013: Stainless steel table and kitchen cutlery. General specifications

GOST 32624-2020: Crown covers. General specifications

GOST 32758-2014: Public roads. Temporary technical means of traffic management. Specifications and rules for use

GOST 33118-2014: Combined materials on basis of aluminium foil. Specifications

GOST 33746-2016: Returnable polymeric boxes. General specifications

GOST 33759-2016: Instrument oil (MVP). General specifications

GOST 33837-2016: Polymeric packaging for food products. General specifications

GOST 34264-2017: Polymeric transport containers. General specifications

GOST 34405-2018: Metal prefabricated cans. General specifications

GOST 34534-2019: Packaging. Polymer bottles for food liquids. General specifications

GOST 34577-2019: Pallets for cargo. Laying sheets for pallets. General specifications

GOST 3927-88: The shoe lasts. Specifications

GOST 5799-78: Flasks for paints and varnishes. Specifications

GOST 633-80: Oil well tubing and tubing couplings

GOST 6388-91: Tooth brushes

GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.

GOST 6823-2000: Crude natural glycerine. General specifications

GOST 6823-77: Crude glycerine. Specifications

GOST 6980-76: Accumulator ebonite monoblocks for autocars, autobuses and tractors. Specifications

GOST 7247-2006: Paper and combined materials on the base of paper for automatic packaging of food, manufactured production and nonfood products. General specifications

GOST 8020-2016: Concrete and reinforced concrete structures for man-holes of sewerage, water supply and gas supply pipeline systems. Specification

GOST 8434-77: Paper. Method for determination of fraction of total mass of arsenic

GOST 8807-94: Mustard oil

GOST 8808-2000: Maize oil. Specifications

GOST 8988-2002: Rapeseed oil. Specifications

GOST 9.313-89: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings on the plastics. General requirements and technological operations

GOST 9.410-88: Unified system of corrosion and ageing protection. Powder polymeric coatings. Typical technological processes

GOST 9.703-79: Unified system of corrosion and ageing protection. Plastic materials for items, used in tropical conditions. General requirements for selection and test methods

GOST 9298-77: Accumulator ebonite monoblocks for aviation. Specifications

GOST 9923-80: Manual fire barrel. Specifications

GOST 9980.3-86: Paint materials. Packing

GOST R 50291-92: 1,1,2,2,-tetrafluorodibromethane (Khladon 114B2). Specifications

GOST R 50838-2009: Polyethylene pipes for the supply of gaseous fuel. Specifications

GOST R 50838-95: Polyethylene pipes for the supply of gaseous fuel. Specifications

GOST R 51289-99: Returnable polymeric boxes. General specifications

GOST R 51675-2000: Polymeric returnable boxes for bottles with food liquids. Specifications

GOST R 51687-2000: Stainless steel table and kitchen cutlery. General specifications

GOST R 51760-2001: Polymeric consumers packagings. General specifications

GOST R 52101-2003: Vinegars of food raw material. General specifications

GOST R 52145-2003: Combined materials on basis of aluminium foil. Specifications

GOST R 52620-2006: Transport polymeric containers. General specifications

GOST R 52779-2007: Polyethylene fittings for gas pipelines. General specifications

GOST R 54270-2010: Masts (Poles) for overhead contact line supports of railways. Specifications

GOST R 54857-2011: Buildings and structures. Determination of air change of rooms method of indicator gas

GOST R 54927-2012: Polymer composite sheet for special purpose. General technical requirements

GOST R 55732-2013: Mining equipment. Support of mine working. Polymer net for the guard mine working. Specifications

GOST R 55982-2014: Acid acetic for the food industry. Specifications

GOST R 56968-2016: Table vinegar. Specifications

GOST R 57624-2017: Aromatized table vinegar. Specifications

GOST R 57684-2017: Microbiological products. Bio stimulator crop growth. General requirements

GOST R 58121.1-2018: Plastic pipings for the supply of gaseous fuels. Polyethylene (PE). Part 1. General

GOST R 58323-2018: Reinforced concrete pipes for trenchless laying of engineering networks. Technical conditions

GOST R 58386-2019: Sheathed ropes for prestressed structures. Technical specifications

GOST R 58517-2019: Paint rollers. Technical conditions

GOST R 58519-2019: Rules, graters and graters. Technical conditions

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

ITS 32-2017: Production of polymers, including biodegradable

KMS 952:2010: Acetic acid and vinegar for food purposes. Technical specifications

Manual for SNiP 3.07.02-87: Allowance for the production and acceptance of work during the construction of new, reconstruction and expansion of existing hydrotechnical sea and river transport facilities

MU 4149-86: Methodological instructions for state sanitary supervision over production and application of polyolefin polymer materials intended for contact with food products

ODM 218.5.007-2008: Guidelines for the installation of vertical markings on metal barrier fences using protective plastic panels

OST 24.023.29-84: Production planning system. Expanded plastic details produced by compression moulding and high-pressure die casting. Standard techniques and procedures.

OST 26-07-1374-76: Types and grades of plastics used in armature engineering.

OST 26-07-596-72: Electric drives for pipeline fittings. Export including tropical climate countries. General requirements.

PNST 320-2018: Bearing structures of railway signaling devices. General technical requirements

R 415-81: Recommendations for welding of gas and oil field pipe mix from polyethylene

R 50-120-91: Recommendations. Plastics for basic bearing structures. Restrictive list of brands

RM 4-206-95: Automation systems. Specification of equipment, products and materials. Directions for implementation. Allowance to GOST 21.110-95

RSN 58-86: Guidelines for design of panel exterior walls of residential buildings for the north building and climatic zone

RST RSFSR 45-86: Sledge for children. Technical conditions

RST RSFSR 516-88: Eaves metal. Technical conditions

RST RSFSR 643-80: Black steel economic dishes . General specifications

RST RSFSR 644-80: Prosthetic and Orthopedic Products. General Technical Specifications

RST RSFSR 655-81: Ice screws fishing. General technical conditions

RST RSFSR 656-81: Apparatus for processing vegetables and fruits. Technical conditions

RST RSFSR 92-83: Musical wind instruments. General technical conditions

SanPiN 2.4.7.007-93: Production and marketing of games and toys

SNiP II-45-75: Main pipelines

SP 409.1325800.2018: Pipelines trunk and field for oil and gas. Work on the installation of thermal and anticorrosive insulation, monitoring of work

SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes

ST TsKBA 056-2008: Pipe fittings. Types and brands of plastics used in the valve industry

STB 1517-2004: Plastic consumer packaging. General specifications

STB 1760-2007: Vinegars for food purposes. General specifications

STO 64235108-002-2016: FOPS® surface runoff filters. General requirements

STO 64235108-008-2016: Easily removable KL covers. General requirements

TR 130-02: Technical recommendations on the design and ductless laying of hot water pipelines from PE-X pipes insulated with polyurethane foam in Proflex corrugated polyethylene sheath

TU 1390-007-32256008-05: External heat-insulating coating of pipes and fittings with a diameter of 57 ... 720 mm

TU 14-3R-63-2002: Steel pipes lined with polyethylene pipes. Technical specifications

TU 1469-001-01297858-98: Rings support-guides for the transition of steel pipelines through roads and railways, laid in a protective casing (case). Technical conditions

TU 1469-001-53597015-01: Rings for guides for the transition of steel pipelines through roads and railways, laid in a protective casing (case)

TU 4859-002-03984155-99: Steel Pipes with Thermal Insulating and Waterproofing Coatings. Technical Specifications

TU 576431-006-01297858-99: Heat-hydro-insulated pipes with thermal insulation made of polyurethane foam. Technical conditions

TU 576431-009-01297858-99: Pipeline elements with polyurethane foam insulation. Technical conditions

TU 5768-005-47114136-02: Steel pipes insulated with polyurethane foam in a polyethylene protective sheath for oil and gas pipelines

TU 5768-009-86695843-2011: Steel pipes with thermal insulation made of polyurethane foam in a protective sheath for oil and gas pipelines

TU 67-18-163-93: Three-layer wall frameless panels with steel cladding and mineral wool insulation. Technical conditions

VSN 006-89: Construction Of Main And Field Pipelines Welding

VSN 136-78/Mintransstroj: Instructions for the design of auxiliary structures and devices for the construction of bridges

VSN 34-91/MT-st: Execution and Acceptance Requirements for New Construction, Rehabilitation, and Expansion of Existing Marine and River Hydraulic Transport Structures. Part I: Part II: Part III

VSN 35-86: Guidelines for Installation of Plastic Piping at USSR Gosagroprom Facilities

VSN 51-9-86: Design of offshore underwater oil and gas pipelines

Customers Who Viewed This Item Also Viewed:

Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Blanks for marine shafts and rudder stocks. Specifications
Language: English
Price: $216.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!