GOST R 50030.5.1-99
ГОСТ Р 50030.5.1-99
|
|
Low-voltage switchgear and control gear. Part 5.1. Control circuit devices and switching elements. Electromechanical control circuit devices
Аппаратура распределения и управления низковольтная. Часть 5.1. Аппараты и коммутационные элементы цепей управления. Электромеханические аппараты для цепей управления
Status: Not effective - Superseded. IUS 5-2006
The standard applies to devices for control circuits and switching elements intended for control, signaling, blocking, etc. control equipment. The standard applies to devices for control circuits of rated voltage up to 1000 V AC (frequency no more than 1000 Hz) or 600 V DC.
Стандарт распространяется на аппараты для цепей управления и коммутационные элементы, предназначенные для управления, сигнализации, блокировки и т.д. аппаратуры управления. Стандарт распространяется на аппараты для цепей управления на номинальное напряжение до 1000 В переменного тока (частотой не более 1000 Гц) или 600 В постоянного тока.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
12/17/1989
SKU: RUSS73006
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.1 Electric machines, electrical equipment and materials »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.120 Electrical fittings »
29.120.40 Switches »
National standards »
29 ELECTRICAL ENGINEERING »
29.120 Electrical fittings »
29.120.40 Switches »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.130 Switching and control equipment »
29.130.20 Low-voltage switching equipment and control equipment »
National standards »
29 ELECTRICAL ENGINEERING »
29.130 Switching and control equipment »
29.130.20 Low-voltage switching equipment and control equipment »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E7 Electrical apparatus and fittings »
E71 Devices with voltage up to 1000 V »
National Standards for OKSTU »
ELECTRICAL EQUIPMENT AND MATERIALS »
Electric devices for voltage up to 1000 V »
The Document is Replaced With:
GOST R 50030.5.1-2005: Low-voltage switchgear and controlgear. Part 5. Control circuit devices and switching elements. Section 1. Electromechanical control circuit devices
The Document References:
GOST 10434-82: Electric contact connections. Classification. General technical requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.007.6-75: Occupation safety standards system. Safety requirements. Switching devices for voltages below 1000 v
GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15543.1-89: Electrical articles. General requirements for environmental climatic aspects stability
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 16962.1-89: Electrical articles. Test methods as to environments climatic factors resistance
GOST 16962.2-90: Electrotechnical product
GOST 17516.1-90: Electrical articles. General requirement for environment mechanical stability
GOST 18620-86: Electrotechnical articles
GOST 2.767-89: Unified system for design documentation. Graphic identifications in electrical schemes. Protective relays
GOST 21128-83: Power supply systems, nets, sources, converters and receivers of electric energy. Rated voltages to 1000 V
GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods
GOST 27915-88: Single input energizing quantity measuring relays with non-specified time or with independent specified time
GOST 27916-88: Electrical relays. Interruptions to and alternating component (ripple) in d. c. Auxiliary energizing quantities of measuring relays
GOST 27918-88: Single input energizing quantity measuring relays with dependent specified time
GOST 28198-89: Basic environmental testing. Part 1. General and quidance
GOST 28209-89: Basic environmental testing procedures. Part 2. Tests. Test N: Change of temperature
GOST 28216-89: Basic environmental testing procedures. Part 2. Tests. Test Db and guidance: damp heat, cyclic (12 + 12 hour cycle)
GOST 28312-89: Radioelectronic equipment, professional. Conventional graphic designations
GOST 28987-91: All-or-nothing electrical relay. Application of the IEC quality assessment system for electronic components to all-or-nothing relays
GOST 29149-91: Colours of indicator lights and push-buttons
GOST 29156-91: Electromagnetic compatibility of technical equipment. Electrical fast transient /burst immunity. Technical requirements and test methods
GOST 29191-91: Electromagnetic compatibility of technical means. Electrostatic discharge immunity. Technical requirements and test methods
GOST 30011.4.1-96: Low-voltage switchgear and control gear. Part 4. Contactors and motor-starters. Section 1. Electromechanical contactors and motor-starters
GOST 30011.5-93: Low-voltage switchgear and control gear
GOST 30328-95: Electrical relays. Insulation test
GOST 30329-95: All-or-nothing electrical relays
GOST 6697-83: Power supply systems, sources, converters and receivers of electric alternating current energy rated frequencies from 0,1 to 10000 Hz and tolerances
GOST 6827-76: Electrical equipment and receivers of electric energy. Series of nominal currents
GOST 9.005-72: Unified system of corrosion and ageing protection. Metals, alloys, metallic and non-metallic coatings. Permissible and impermissible contacts with metals and non-metals
GOST 9601-84: Power track (limit) switches. General specifications
GOST R 50514-93: Electrical relays. Insulation test
GOST R IEC 536-94: Classification of electrical and electronic equipment with regard to protection against electric shock
The Document is Referenced By:
GOST 12.2.124-90: The food industry equipment
GOST 22584-96: Electric rope hoists
GOST 26005-83: Pressure switches for Pnom up to 320 MPa (320 kgf/sq cm). Specifications
GOST EN 1070-2003: Safety of machinery. Terms and definitions
GOST R 50030.1-2000: Low-voltage switchgear and controlgear. Part 1. General rules and test methods
GOST R 50030.4.1-2002: Low-voltage switchgear and controlgear. Part 4-1. Contactors and motor-starters. Electromechanical contactors and motor-starters
GOST R 50030.5.1-2005: Low-voltage switchgear and controlgear. Part 5. Control circuit devices and switching elements. Section 1. Electromechanical control circuit devices
GOST R 50030.5.5-2000: Low-voltage switchgear and controlgear. Part 5-5. Control circuit devices and switching elements. Electrical emergency stop device with mechanical latching function
GOST R 51336-99: Safety of machinery. Emergency stop equipment. Functional aspects. Principles for design
GOST R 51345-99: Safety of machinery. Interlocking devices associated with guards. Principles for design and selection
GOST R 51731-2001: Electromechanical contactors for household and similar purposes
GOST R 51992-2002: Surge protective devices connected to low-voltage power distribution systems. Part 1. Performance requirements and testing methods
GOST R 52219-2004: Automatic control systems for gas burners and gas burning appliances. General technical requirements and test methods
GOST R IEC 60204-1-99: Safety of machinery. Electrical equipment of machines. Part 1. General requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
