imgalt

GOST R 52751-2007

ГОСТ Р 52751-2007

Steel-fibro-concrete slabs for bridge spans. Specifications

Плиты из сталефибробетона для пролетных строений мостов. Технические условия

Status: Effective - Introduced for the first time

This standard applies to precast reinforced concrete slabs with a combined reinforcement - (working reinforcement and steel fiber), intended for use as a bearing part of precast and precast monolithic steel-reinforced concrete, reinforced concrete and steel superstructures of factory-made for railway and road bridges of mainly northern execution. This standard also applies to steel fiber concrete plates manufactured using thin RPA technologies with the activation of mixing water and additives.

Настоящий стандарт распространяется на сборные железобетонные сплошные плиты с комбинированным армированием - (рабочая арматура и стальная фибра), предназначенные для применения в качестве несущей части сборных и сборно-монолитных сталежелезобетонных, железобетонных и стальных пролетных строений заводского изготовления для железнодорожных и автодорожных мостов преимущественно северного исполнения. Настоящий стандарт также распространяется на сталефибробетонные плиты, изготовленные с использованием тонких РПА-технологий с активацией воды затворения и добавок

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 9/24/2007

SKU: RUSS73009

Price: $915.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 5. Regulatory documents for building structures and products » k.52 Reinforced concrete and concrete structures »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.40 Concrete structures »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.40 Concrete structures »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh3 Building structures and parts » Zh33 Stone, brick, concrete and reinforced concrete structures and parts »


The Document References:

Federal Law 184-FZ: About technical regulation

GOST 10060.0-95: Methods for the determination of frost-resistance. General requirements

GOST 10060.2-95: Concretes, rapid method for the determination of frost-resistance by repeated alternated freezing and thawing

GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications

GOST 10180-90: Concretes. Methods for strength determination using reference specimens

GOST 10181-2000: Concrete Mixtures Test method

GOST 10446-80: Wire. Tensile test method

GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements

GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements

GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection

GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements

GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements

GOST 12.3.020-80: Occupational safety standards system. Transporting process of loads in all fields of national economy. General requirements safety

GOST 12730.5-84: Concretes. Methods for determination of water tightness

GOST 12767-94: Reinforced concrete solid slabs for floors in lange-panel buildings. General specifications

GOST 12801-98: Materials on the basis of organic binders for road and airfield construction. Test methods

GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage

GOST 13087-81: Concretes. Method of abrasion test

GOST 14192-96: Cargo marking

GOST 166-89: Vernier callipers. Specifications

GOST 17.1.3.13-86: Hydrosphere. General requirements for surface water protection against pollution

GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises

GOST 17624-87: Concrete. Ultrasonic method of strength determination

GOST 18105-86: Concretes. Rules for the strength control

GOST 22245-90: Viscous petroleum road bitumens. Specification.

GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing

GOST 22904-93: Reinforced concrete structures. Magnetic method for determining the thickness of the protective layer of concrete and the location of reinforcement

GOST 23732-79: Water for concretes and mortars. Specifications

GOST 23858-79: Welded joints butt and T-formed of reinforcement steel bars. Ultrasonic methods of quality inspection. Acceptability requirements

GOST 24104-2001: Laboratory scales. General technical requirements

GOST 24211-2003: Additives for concretes and mortars. General specifications

GOST 24452-80: Concretes. Methods of prismatic compressive strengths, modulus of elasticity and Poisson ratio determination

GOST 24544-81: Concretes. Methods for determining shrinkage and creep deformations

GOST 24545-81: Concretes. Methods of fatigue tests

GOST 25706-83: Magnifiers

GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General

GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements

GOST 26589-94: Roofing and waterproof mastics. Methods of testing

GOST 26633-91: Heavy-weight and sand concretes. Specifications

GOST 2695-83: Sawn timber of leaf-bearing species

GOST 27006-86: Concretes. Rules for mix proportioning

GOST 28574-90: Corrosion protection in construction. Concrete and reinforced concrete constructions. Methods of the protection covers adhesion testing

GOST 29329-92: Balance for static weightings

GOST 30693-2000: Roofing and hydraulic insulating mastics. General specifications

GOST 310.3-76: Cements. Methods of tests consistency, times of settining and of soundness

GOST 310.4-81: Cements. Methods of tests of bending and compression strengths

GOST 380-2005: Common quality carbon steel. Grades

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications

GOST 6613-86: Square meshed woven wire gauzes

GOST 7473-94: Ready-mixed concrete. Specifications

GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications

GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests

GOST 8735-88: Sand for construction work. Testing methods

GOST 8736-93: Sand for construction works. Specifications

GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 12.3.047-98: Occupational safety standards system. Fire safety of technological processes. General requirements. Methods of control

GOST R 52748-2007: Automobile roads of the general use. Standard loads, loading systems and clearance approaches

GOST R 8.580-2001: State system for ensuring the uniformity of measurements. Determination and application of precision data in relation to petroleum products tests methods

GOST R 8.589-2001: State system for ensuring the uniformity of measurements. Control of nature environment soiling. Metrological ensuring. General principles

GOST R ISO 2859-1-2007: Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling schemes indexed by acceptance quality limit for lot-by-lot inspection

MGSN 5.02-99: Design of Urban Bridge Structures

SNiP 12-03-2001: Labor safety in construction industry

SNiP 12-04-2002: Safety in construction. Part 2. Construction works

SNiP 3.01.04-87: Project acceptance for operation after construction

SNiP 3.06.04-91: Bridges and pipes

SNiP 3.06.07-86: Bridges and Pipes. Rules for Inspection and Testing

SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules

SP 52-101-2003: Concrete and reinforced concrete structures without prestressing

SP 52-102-2004: Pre-stressed concrete structures

SP 52-104-2006: Steel fibre reineorced concrete structures

TU 5718-001-58528024-04: BITREK Technical Specifications. Bitumen Resin Environmentally Friendly Composite Materials

The Document is Referenced By:

ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures

SP 46.13330.2012: Bridges and pipes

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Heating, Ventilation and Air Conditioning (HVAC)
Language: English
Price: $430.00
imgalt
Technical regulations of Customs Union. On safety of rolling stock
Language: English
Price: $181.30
imgalt
Goat whole drinking milk. Specifications
Language: English
Price: $168.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
Seamless steel pipes for steam boilers and pipelines
Language: English
Price: $581.17
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Capillary control
Language: English
Price: $226.00
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Visual and measuring control
Language: English
Price: $348.00
imgalt
Pipe fittings. Passport. Rules for development and design
Language: English
Price: $254.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!