GOST R 54418.21-2011
ГОСТ Р 54418.21-2011
|
|
Renewable power engineering. Wind power engineering. Wind turbines. Part 21. Measurement and assessment of power quality characteristics of grid connected wind turbines
Возобновляемая энергетика. Ветроэнергетика. Установки ветроэнергетические. Часть 21. Измерение и оценка характеристик, связанных с качеством электрической энергии, ветроэнергетических установок, подключенных к электрической сети
Status: Effective - Introduced for the first time. IUS 6-2012
This standard establishes: - the characteristics, the values of which must be determined for the application of wind power plants (WPP) connected to the electrical network, in order to make a conclusion about the quality of electrical energy supplied by the wind turbine, as well as the requirements for these characteristics; - the order of measurements for the quantitative determination of characteristics; - the procedure for assessing compliance with the requirements for the quality of electrical energy, including an assessment of the quality of electrical energy supplied by wind turbines of a particular type, located on a given site, as well as, possibly, with group accommodation
Настоящий стандарт устанавливает: - характеристики, значения которых должны быть определены для применения ветроэнергетических установок (ВЭУ), подключенных к электрической сети, с тем, чтобы сделать вывод о качестве электрической энергии, поставляемой ВЭУ, а также требования к этим характеристикам; - порядок проведения измерений для количественного определения характеристик; - порядок оценки соответствия требованиям к качеству электрической энергии, включая оценку качества электрической энергии, поставляемой ВЭУ конкретного вида, расположенной на заданной площадке, а также, возможно, при групповом размещении
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
9/28/2011
SKU: RUSS73014
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
27 Power and heat engineering »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.2 Testing and control of products of fuel and energy industry »
4.2.1 Electricity and heat »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.180 Wind turbine systems »
National standards »
27 ENERGY AND HEATING TECHNOLOGY »
27.180 Wind turbine systems »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Electronic engineering, electronics and communications »
E0 General rules and regulations for electronic engineering, electronics and communications »
E02 Design and calculation norms »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 13109-97: Electric energy. Electromagnetic compatibility of technical equipment. Power quality limits in public electrical systems
GOST 1983-2001: Voltage transformers. General specifications
GOST 30372-95: Electromagnetic compatibility of electronic equipment. Terms and definitions
GOST 7746-2001: Current transformers. General specifications
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 1.5-2004: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of structure, drafting, presentation and indication
GOST R 50392-92: Fittings for metal bellows expansion joints and seals. Types, main parameters and dimensions. General specifications
GOST R 51237-98: Non-traditional power engineering. Wind power engineering. Terms and definitions
GOST R 51317.3.12-2006: Electromagnetic compatibility of technical equipment. Limitation of harmonic currents produced by equipment with input current greater than 16A and not greater than 75 A per phase connected to public low-voltage supply systems. Limits and test methods
GOST R 51317.3.3-2008: Electromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A (per phase) and not subject to conditional connection. Limits and test methods
GOST R 51317.4.15-2012: Electromagnetic compatibility of technical equipment. Flickermeter. Functional and design specifications
GOST R 51317.4.15-99: Electromagnetic compatibility of technical equipment. Flikermeter. Technical requirements and test methods
GOST R 51317.4.30-2008: Electric energy. Electromagnetic compatibility of technical equipment. Power quality measurement methods
GOST R 51317.4.7-2008: Electromagnetic compatibility of technical equipment. General guide on harmonics and interharmonics measuring instruments and measurement, for power supply systems and equipment connected thereto
GOST R ISO 9000-2001: Quality management systems. Fundamentals and vocabulary
GOST R ISO 9000-2008: Quality management systems. Fundamentals and vocabulary
GOST R ISO/IEC 17025-2000: General requirements for the competence of testing and calibration laboratories
GOST R ISO/IEC 17025-2006: General requirements for the competence of testing and calibration laboratories
The Document is Referenced By:
GOST R 51524-2012: Electromagnetic compatibility of technical equipment. Adjustable speed electrical power drive systems. Part 3. EMC requirements and specific test methods
GOST R 54418.12.2-2013: Renewable power engineering. Wind power engineering. Wind turbine. Part 12-2. Power performance of electricity producing wind turbines based on nacelle anemometry
GOST R 54418.22-2014: Renewable power engineering. Wind power engineering. Wind turbine. Part 22. Conformity testing and certification
GOST R 54418.27.1-2019: Wind power plants. Part 27-1. General simulation models of wind power plants connected to a power system
GOST R 55620-2013: Renewable power engineering. Wind turbines. Electromagnetic compatibility
GOST R 58092.2.1-2020: Electric energy storage systems (EES). Installation parameters and test methods. general description
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.