GOST 32400-2013

ГОСТ 32400-2013

Molded side frame and bolster beam of вogies for railway freight wagons. Specifications

Рама боковая и балка надрессорная литые тележек железнодорожных грузовых вагонов. Технические условия

Status: Effective - Introduced for the first time. IUS 7-2014)

This standard applies to cast steel side frames and bolsters of biaxial three-element bogies of freight cars of 1520 mm gauge railways, the requirements for which are established in GOST 9246

Настоящий стандарт распространяется на стальные литые боковые рамы и надрессорные балки двухосных трехэлементных тележек грузовых вагонов железных дорог колеи 1520 мм, требования к которым установлены в ГОСТ 9246

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 54

Approved: Federal Agency for Technical Regulation and Metrology, 12/9/2013

SKU: RUSS73185

Price: $798.00




The Product is Contained in the Following Classifiers:

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Admission Testing »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Welding work » Surfacing »

Welding regulations » Main materials » Steel, cast iron »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 001/2011 TR TS. On safety of railway rolling stock » Regulations and standards (to TR CU 001/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 003/2011 TR TS. On safety of railway infrastructure » Regulations and standards (for TR CU 003/2011) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.14 Testing and monitoring of vehicles and equipment » 4.14.3 Railway and tram locomotives, rail rolling stock »

ISO classifier » 45 RAILWAY ENGINEERING » 45.060 Rolling stock of railways » 45.060.01 Rolling stock of railways in general »

National standards » 45 RAILWAY ENGINEERING » 45.060 Rolling stock of railways » 45.060.01 Rolling stock of railways in general »


The Document References:

GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles

GOST 1.2-2009: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Rules for development, taking over, application, renovation and cancellation

GOST 10905-86: Surface plates and face-plates. Specifications

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 1497-84: Metals. Methods of tension test

GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 18321-73: Statistical quality control. Item random sampling methods

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 19200-80: Iron and steel castings. Terms and definitions of defects

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 2.601-2013: Unified system for design documentation. Exploitative documents

GOST 2.602-2013: Unified system for design documentation. Repair documents

GOST 2.602-95: Unified system for design documentation. Repair documents

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium

GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium

GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 2601-84: Welding of metals. Terms and definitions of basic concepts

GOST 26645-85: Metal and alloy castings. Dimensions and mass tolerances and machining allowances.

GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions

GOST 28702-90: Non-destructive testing. Ultrasonic thickness gauges. General technical requirements

GOST 29329-92: Balance for static weightings

GOST 3212-92: Gated patterns. Pattern tapers, core prints, dimensional tolerances

GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9246-2013: Bogies two-axle three-piece for freight wagons of 1520 mm gauge railways. General technical specifications

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 977-88: Steel castings. General specifications

GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests

GOST R 53464-2009: Metal and alloy castings. Dimensions and mass tolerances and machining allowances

The Document is Referenced By:

GOST 18322-2016: Maintenance and repair system of engineering. Terms and definitions

GOST 32699-2014: Moulded side frame and bolster beam of two-axle three-piece bogies for freight wagons of 1520 mm gauge railways. Methods of non-destructive testing

GOST 33211-2014: Freight cars. Requirements for strength and dynamic properties

GOST 33788-2016: Freight and passenger coaches. Test methods for strength and dynamic quality

GOST 33939-2016: Cast details for freight wagons’ bogies. Methods of durability testing. Part 1. Side frame

GOST 34385-2018: Axle-boxes and adapters for wheelsets of freight wagon bogies. General specifications

GOST 34502-2018: Details of cast carts of railway freight cars. Life test methods. Part 2. The beam is nadressorny

GOST 34717-2021: Cast side member and bolster cast triaxial bogies for freight wagons. Specifications

GOST 34763.1-2021: Three- and four axle bogies for railroad freight wagons. General specifications

GOST 34767-2021: Balance board of three-axle bogies for freight wagons. Specifications

GOST 34769-2021: Cotter beam for bogies of three-axle freight wagons. Technical specifications

GOST 4686-2012: Brake beams of brake leverage gear. Specifications.

GOST 9246-2013: Bogies two-axle three-piece for freight wagons of 1520 mm gauge railways. General technical specifications

GOST R 56666-2015: Technical diagnostics. Acoustic method of diagnostics and evaluation a residual resource of side frames trucks wagons. General requirements

GOST R 58720-2019: Carts, side frames, nadressorny beams and connecting special freight-type cars. General specifications

RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)

Customers Who Viewed This Item Also Viewed:

Man-machine system. Operator's arm-chair. General ergonomic requirements
Language: English
Price: $73.00
Traction railway stock wheelsets of 1520 mm gauge railways. General specifications
Language: English
Price: $137.00
Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards
Language: English
Price: $332.00
Safety of machinery. Interlocking devices associated with guards. Principles for design and selection
Language: English
Price: $436.00
Seismic building design code
Language: English
Price: $594.00
Conformity assessment. The procedure for conducting inspection control in certification procedures
Language: English
Price: $491.82

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!