GOST 30765-2001

ГОСТ 30765-2001

Metal transport packagings. General specifications

Тара транспортная металлическая. Общие технические условия

Status: Effective - Introduced for the first time

This standard applies to transport metal containers: drums, barrels, flasks, canisters for packaging, transportation and storage of chemical and food products. This standard establishes the basic requirements for packaging and methods of their control, the rules for transportation and storage. The standard should be applied in the development of regulatory documents on the packaging for specific types of products.

Настоящий стандарт распространяется на транспортную металлическую тару: барабаны, бочки, фляги, канистры, предназначенную для упаковывания, транспортирования и хранения химической и пищевой продукции. Настоящий стандарт устанавливает основные требования к таре и методам их контроля, правила при транспортировании и хранении. Стандарт должен применяться при разработке нормативных документов на тару для конкретных видов продукции

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 62

Approved: State Committee of the Russian Federation for Standardization and Metrology, 10/22/2002

SKU: RUSS73215

Price: $785.70




The Product is Contained in the Following Classifiers:

Evidence base (TR CU, Technical Regulation of the Customs Union) » 005/2011 TR CU. O packaging safety » Norms and standards (to TR TS 005/2011) »

ISO classifier » 55 PACKAGING AND DISTRIBUTION OF GOODS » 55.140 Barrels. Drums. Canisters »

National standards » 55 PACKAGING AND DISTRIBUTION OF GOODS » 55.140 Barrels. Drums Canisters »

National Standards for KGS (State Standards Classification) » Latest edition » D Vehicles and packaging » D8 Metal containers » D81 Metal boxes, buckets and cans »


The Document References:

GOST 10007-80: Polytetrafluoroethylene. Specifications

GOST 10052-75: Metal covered electrodes, for manual arc welding of high-alloyed steels with special properties. Types

GOST 10277-90: Putties. Specifications

GOST 103-76: Hot-rolled steel strip. Dimensions

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 11069-2001: Primary aluminium. Grades

GOST 11070-74: Primary aluminium ingots. Specifications

GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications

GOST 12026-76: Filter paper for laboratory application

GOST 12085-88: Concentrated natural chalk. Specifications

GOST 13078-81: Sodium glass liquid. Technical conditions

GOST 13345-85: Tin-plate and black plate

GOST 13726-97: Aluminium and aluminium alloys strips. Specifications

GOST 13841-95: Corrugated board boxes for chemical products. Specifications

GOST 14039-78: Emulsion polyvinylchloride. Specifications

GOST 1412-85: Flakish graphite cast iron

GOST 14192-96: Cargo marking

GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions

GOST 14806-80: Arc welding of aluminium and aluminium alloys in inert gases. Welded joints. Main types, design elements and dimensions

GOST 14918-80: Continuously galvanized sheet steel. Technical conditions.

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 1583-93: Aluminium casting alloys. Specifications

GOST 15878-79: Resistance welding. Welded joints. Design elements and dimensions

GOST 15895-77: Statistical quality control. Terms and definitions

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications

GOST 166-89: Vernier callipers. Specifications

GOST 17133-83: Rubber sheets for articles, contacting with food stuff. Specifications

GOST 17305-91: Wire of carbon construction steel

GOST 17527-86: Package. Terms and definitions

GOST 18242-72: Statistical acceptance inspection by alternative feature inspection plans

GOST 18321-73: Statistical quality control. Item random sampling methods

GOST 18425-73: Complete, filled transport packages. Vertical impact test by dropping

GOST 18573-86: Wooden boxes for the production of chemical industry

GOST 18992-80: Polyvinyl acetate homopolymeric coarse breakup dispersion. Specifications

GOST 19433-88: Dangerous goods. Classification and marking

GOST 19729-74: Ground talc for manufacture of rubber products and plastics. Specifications

GOST 19851-74: Ribbon from carbon cold-rolled cut steel

GOST 19903-74: Hot-rolled steel sheets. Dimensions

GOST 19904-90: Cold-rolled steel sheets. Dimensions

GOST 2084-77: Mobile gasoline Specifications

GOST 21140-88: Containers

GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications

GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements

GOST 2246-70: Welding steel wire. Specifications

GOST 23494-79: Primer XC-059, enamels XC-759, varnish XC-724. Specifications

GOST 23760-79: Enamels MЧ-145. Specifications

GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions

GOST 25014-81: Filled transport packages. Methods of testing strength in piling

GOST 26319-84: Dangerous cargoes

GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements

GOST 29329-92: Balance for static weightings

GOST 3242-79: Welded joints

GOST 3282-74: General-purpose low-carbon steel wire. Specifications

GOST 3640-94: Zinc. Specifications

GOST 380-94: Normal quality carbon steel

GOST 40.9001-88: Quality sistems. Model for guality assurance in design/development, production, installation and servicing

GOST 40.9002-88: Quality sistems. Model for guality accurance in production and installation

GOST 40.9003-88: Quality systems. Model for guality accurance in final inspection and test

GOST 4152-89: Drinking water. Method for determination of arsenic mass concentration

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 481-80: Compressed asbestos fibre sheets and gaskets from it. Specifications

GOST 503-81: Cold-rolled low-carbon steel strip. Specifications

GOST 5264-80: Manual are welding. Welding joints. Main types, design elements and dimensions

GOST 535-88: Common quality carbon bar and shaped sections. General specifications

GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock

GOST 5631-79: Lacquer BT-577 and paint BT-177. Specifications

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape

GOST 5971-78: Enamels for instruments. Specifications

GOST 6009-74: Hot-rolled steel strip. Specifications

GOST 6465-76: Enamels PF-115. Specifications

GOST 6507-90: Micrometers. Specifications

GOST 6631-74: Enamels НЦ-132. Specifications

GOST 6745-79: Enamel ГФ-1426. Specifications

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7293-85: Cast iron with globular graphite for foundry

GOST 7313-75: Enamels ХВ-785 and lacquer XB-784. Specifications

GOST 7338-90: Rubber and rubber-fabric sheets. Specifications

GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel

GOST 7502-98: Measuring metal tapes. Specifications

GOST 7871-75: Aluminum and aluminium alloy welding wire

GOST 792-67: Quality low-carbon wire

GOST 8017-74: Lacquer БT-99. Specifications

GOST 8448-78: Coal and shale benzene. Specifications

GOST 8479-70: Structural carbon and alloy steel forgings

GOST 860-75: Tin. Specifications

GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST 9.307-89: Unified system of corrosion and ageing protection. Hot-dip zinc coatings. general requirements and methods of checking

GOST 9.402-80: Metal surface preparation for painting

GOST 9045-93: Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications

GOST 9087-81: Welding melted fluxes

GOST 9109-81: Primers ФЛ-03k and ФЛ-03Ж. Specifications

GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types

GOST 9754-76: Enamels MЛ-12 type. Specifications

GOST R 50779.10-2000: Statistical methods. Probability and general statistical terms. Terms and definitions

GOST R 50779.11-2000: Statistical methods. Statistical quality control. Terms and definitions

GOST R 50779.71-99: Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection

GOST R 51105-97: Gasoline for combustion engines. Unleaded gasoline. Specifications

GOST R 51313-99: Motor petrols. General technical requirements

GOST R ISO 9001-2001: Quality management systems. Requirements

GOST R ISO 9002-96: Quality systems. Model for quality assurance in production, installation and servicing

GOST R ISO 9003-96: Quality system. Model for quality assurance in final inspection and test

GOST 977-88: Steel castings. General specifications

The Document is Referenced By:

GOST 13950-91: Welded and folded steel barrels

GOST 1625-2016: Formalin for industrial use. Specifications

GOST 18188-72: Solvents of grades 645, 646, 647, 648 for paint materials. Specifications

GOST 7827-74: Solvents of grades P-4, P-4A, P-5, P-5A, P-12 for paint materials. Specifications

GOST 9980.3-2014: Materials of paint and varnish and auxiliary, raw materials for paint and varnish materials. Packing

GOST R 52620-2006: Transport polymeric containers. General specifications

GOST R 54574-2011: Steel drums for paint materials. Specifications

GOST R 58211-2018: Adhesives for floor coverings. General specifications

PNST 68-2015: Multifunction fluorinated composition. Specifications

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Hoisting cranes. Rules and test methods
Language: English
Price: $393.39
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Cable products for nuclear power plants. Technical requirements of the operating organization
Language: English
Price: $449.11
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Loads and actions
Language: English
Price: $495.00
Technical Regulations of the Eurasian Economic Union "On Restriction of the Use of Hazardous Substances in Electrical and Radioelectronic Products"
Language: English
Price: $83.16

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!