GOST R IEC 61508-4-2012
ГОСТ Р МЭК 61508-4-2012
|
|
Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 4. Terms and definitions
Функциональная безопасность систем электрических, электронных, программмируемых электронных связанных с безопасностью. Часть 4. Термины и определения
Status: Effective - Supersedes. IUS 3-2014
This standard contains definitions and explanations of terms that are used in parts 1 to 7 of IEC 61508. The terms of reference of a technical committee include the use (where possible) of fundamental safety standards when preparing their own standards. In this case, the requirements, verification methods or verification conditions of this underlying safety standard are not applied if they are not specifically referenced or are not included in the standards prepared by these technical committees.
Настоящий стандарт содержит определения и объяснения терминов, которые используются в частях 1 - 7 МЭК 61508. В круг обязанностей технического комитета входит использование (там, где это возможно) основополагающих стандартов по безопасности при подготовке собственных стандартов. В этом случае требования, методы проверки или условия проверки настоящего основополагающего стандарта по безопасности не применяют, если на них нет конкретной ссылки или они не включены в стандарты, подготовленные этими техническими комитетами
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
10/29/2012
SKU: RUSS73352
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.1 Basic requirements for instruments and test equipment »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.040 Industrial automated systems »
25.040.40 Measurement and control of production process »
National standards »
25 MECHANICAL ENGINEERING »
25.040 Industrial automated systems »
25.040.40 Measurement and control of production process »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.020 Electrical engineering in general »
National standards »
29 ELECTRICAL ENGINEERING »
29.020 Electrical engineering in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T51 Documentation system that determines indicators of quality, reliability and durability of products »
As a Replacement Of:
GOST R IEC 61508-4-2007: Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 4. Terms and definitions
The Document References:
GOST R 51898-2002: Safety aspects. Guidelines for their inclusion in standards
GOST R IEC 61508-1-2012: Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 1. General requirements
GOST R IEC 61508-2-2012: Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 2. Requirements for systems
GOST R IEC 61508-3-2012: Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 3. Software requirements
The Document is Referenced By:
GOST 33397-2015: Railway telecommunications. General safety requirements
GOST 33435-2015: Control, monitoring and safety means of railway rolling stock. Safety requirements and control methods
GOST 33889-2016: Railway telecommunication. Terms and definitions
GOST IEC 61326-3-2-2015: Electrical equipment for measurement, control and laboratory use. EMC requirements. Part 3-2. Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety). Industrial applications with specified electromagnetic environment
GOST IEC/TS 61000-1-2-2015: Electromagnetic compatibility (EMC). Part 1-2. General. Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
GOST R 22.9.11-2013: Safety in emergencies. Emergency and rescue systems for rescue from high-rise
GOST R 27.010-2019: Reliability in technology. Mathematical expression for indicators of reliability, readiness, maintainability
GOST R 27.011-2019: Reliability in technology. Probabilistic risk analysis of technical systems. Estimation of the intensity of the final event for a given initial state
GOST R 27.013-2019: Reliability in technology. Reliability Measurement Methods
GOST R 50030.4.1-2012: Low-voltage switchgear and control gear. Part 4. Contactors and motor-starters. Section 1. Electromechanical contactors and motor-starters
GOST R 50571.29-2022: (IEC 60364-5-55: 2016) Low-voltage electrical installations. Part 5-55. Selection and installation of electrical equipment. Other equipment
GOST R 54418.24-2023: Wind energy. Wind power installations. Part 24. Lightning protection
GOST R 56188.3.100-2023: Fuel Cell Technologies. Part 3-100. Stationary fuel cell-based power plants. Safety
GOST R 57193-2016: Systems and software engineering. System life cycle processes
GOST R 58092.5.1-2018: Electric energy storage (ESS) systems. Safety considerations for grid-integrated EES systems. General requirements
GOST R 58494-2019: Mining equipment. Multifunctional coal mine safety systems. Remote control system for hazardous production facilities
GOST R 58652-2019: Mining equipment. Multifunctional coal mine safety systems. Industrial Safety Principles
GOST R 59989-2022: Systems Engineering. System analysis of the system quality management process
GOST R 59990-2022: Systems Engineering. System analysis of the project evaluation and control process
GOST R 59991-2022: Systems Engineering. System analysis of the risk management process for the system
GOST R 59992-2022: Systems Engineering. System analysis of the management process of the system lifecycle model
GOST R 59993-2022: Systems Engineering. System analysis of the system infrastructure management process
GOST R 59994-2022: Systems Engineering. System analysis of the quality assurance process for the system
GOST R 60.2.0.1-2022: (ISO 22166-1:2021) Robots and robotic devices. Modular principle of construction of service robots. Part 1. General requirements
GOST R 70732-2023: Automated control systems of technological processes and technical means of railway transport. Requirements for functional and information security of software and methods of control
GOST R 70841-2023: Oil and gas industry. Collection and exchange of equipment reliability and maintenance data
GOST R 71160-2023: Oil and gas industry. Design and operation of subsea production systems. Part 6. Subsea production control systems
GOST R 71237-2024: Suspended ropeways for transportation of people. Electrical equipment. Safety requirements
GOST R 71300-2024: Mining equipment. Explosion protection means in gas suction and degassing pipelines and installations. General technical requirements and test methods
GOST R 71474-2024: Complexes of technical means of non-programmable logic for construction of protection systems and technological process control systems at electric power industry facilities. General provisions
GOST R IEC 61069-1-2017: Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment. Part 1. Terminology and basic concepts
GOST R IEC 61508-1-2012: Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 1. General requirements
GOST R IEC 61508-2-2012: Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 2. Requirements for systems
GOST R IEC 61508-3-2012: Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 3. Software requirements
GOST R IEC 61508-5-2012: Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 5. Guidelines for methods of the determination of safety integrity levels
GOST R IEC 61508-6-2012: Electric systems. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 6. Guidelines on the application of IEC 61508-2 and IEC 61508-3
GOST R IEC 61508-7-2012: Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 7. Techniques and measures
GOST R IEC 61784-3-1-2016: Industrial communications networks. Profiles. Part 3-1. Functional safety fieldbuses. Additional specifications for CPF 1
GOST R IEC 61784-3-12-2016: Industrial communications networks. Profiles. Part 3-12. Functional safety fieldbuses. Additional specifications for CPF 12
GOST R IEC 61784-3-2015: Industrial communications networks. Profiles. Part 3. Functional safety fieldbuses. General rules and profile definitions
GOST R IEC 61784-3-3-2016: Industrial communications networks. Profiles. Part 3-3. Functional safety fieldbuses. Additional specifications for CPF 3
GOST R IEC 61784-3-8-2016: Industrial communications networks. Profiles. Part 3-8. Functional safety fieldbuses. Additional specifications for CPF 8
GOST R IEC 62061-2013: Safety of machinery. Functional safety of safety-related electrical, electronic and programmable electronic control systems
GOST R IEC 62061-2015: Safety of machinery. Functional safety of safety-related electrical, electronic and programmable electronic control systems
GOST R IEC 62282-2-2014: Fuel cell technologies. Part 2. Fuel cell modules
GOST R IEC 62282-3-100-2014: Fuel cell technologies. Part 3-100. Stationary fuel cell power systems. Safety
GOST R ISO/IEC 14762-2013: Information technology. Functional safety requirements for home and building electronic systems (HBES)
GOST R MJeK 61000-6-7-2019: Electromagnetic compatibility (EMC). Part 6-7. General standards. Immunity requirements for equipment designed to perform functions in safety-related systems (functional safety) at industrial sites
GOST R MJeK 61165-2019: Reliability in technology. Application of Markov methods
GOST R MJeK 61513-2020: Monitoring and control systems important for nuclear plant safety. General requirements
OTT 1.1.3.10.1446-2018: Atom stations. Control systems important to safety. Creation, modernization and operation. General technical requirements
PNST 16-2014: Mining equipment. Multipurpose safety systems for coal mines. Monitoring system of an aerological condition of excavations. General technical requirements and test methods
PNST 17-2014: Mining equipment. Multipurpose safety systems for coal mines. Systems for observation and notification of an accident. General technical requirements
PNST 18-2014: Mining equipment. Multipurpose safety systems for coal mines. System for searching and localization persons in accident. General technical requirements and test methods
PNST 366.3-2019: Industrial automation systems and integration. Ensuring the safety of industrial enterprises through the use of automatic process control systems. Part 3. Preparation, launch and operation of safety devices
PNST 366.5-2019: Industrial automation systems and integration. Ensuring the safety of industrial enterprises through the use of automatic process control systems. Part 5. Practical Guide
PNST 366.6-2019: Industrial automation systems and integration. Ensuring the safety of industrial enterprises through the use of automatic process control systems. Part 6. Applications for ensuring the safety of industrial enterprises with a high level of danger
PNST 619-2022: Oil and gas industry. Underwater production systems. Functional safety of electrical, electronic and programmable electronic safety systems
PNST 625-2022: Oil and gas industry. Subsea production systems. Instrumental system of protection against overpressure. Methodical instructions
PNST 689-2022: Oil and gas industry. Underwater production systems. Functional safety of electrical, electronic, programmable electronic systems. Software requirements
PNST 819-2023: Information Technology (IT). Internet of Things. Systems with domain separation. Terms and definitions
PNST 836-2023: Artificial Intelligence. Functional safety and artificial intelligence systems
|
Customers Who Viewed This Item Also Viewed:
 |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
