GOST R IEC 60601-2-7-2006
ГОСТ Р МЭК 60601-2-7-2006
|
|
Medical electrical equipment. Part 2-7. Particular requirements for the safety of high-voltage generators of diagnostic X-ray generators
Изделия медицинские электрические. Часть 2-7. Частные требования безопасности к рентгеновским питающим устройствам диагностических рентгеновских генераторов
Status: Not effective - Canceled. Registration information 1280-st dated 12/13/2011
The standard applies to medical diagnostic X-ray generators and their constituent parts, including: - Electronic radiotherapy, forming a single whole with an X-ray emitter; - RPU for simulators with radiation therapy. Where possible, the requirements for X-RAY GENERATORS are given, but only in those cases where these requirements affect the operation of the corresponding RPU. The standard does not apply to: - RPU with STORAGE CAPACITORS (requirements for them are given in IEC 601-2-15); - RPU for mammography; - RPU for reconstructive tomography.
Стандарт распространяется на РПУ медицинских диагностических РЕНТГЕНОВСКИХ ГЕНЕРАТОРОВ и их составные части, включая: - РПУ, образующие единое целое с РЕНТГЕНОВСКИМ ИЗЛУЧАТЕЛЕМ; - РПУ для симуляторов при лучевой терапии. Где это возможно приводятся требования к РЕНТГЕНОВСКИМ ГЕНЕРАТОРАМ, но только в тех случаях, когда эти требования влияют на работу соответствующего РПУ. Стандарт не распространяется: - на РПУ с НАКОПИТЕЛЬНЫМИ КОНДЕНСАТОРАМИ (требования к ним приведены в МЭК 601-2-15); - РПУ для маммографии; - РПУ для реконструктивной томографии.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/27/2006
SKU: RUSS73365
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.10 Operation of electrical installations, electrical equipment and power tools »
ISO classifier »
19 TESTS »
19.100 Non-destructive testing »
National standards »
19 TESTS »
19.100 Non-destructive testing »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E8 Lighting and X-ray »
E84 X-ray equipment and fittings »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 30324.0-95: Medical electrical equipment. Part 1. General safety requirements
GOST 30324.15-95: Medical electrical equipment. Part 2. Particular requirements for the safety of capacitor discharge X- ray generators
GOST 30391-95: Basic aspects of the safety philosophy of electrical equipment, used in medical practice
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 50267.0.2-2005: Medical electrical equipment. Part 1-2. General requirements for safety. Electromagnetic compatibility. Requirements and test methods
GOST R 50267.0.3-99: Medical electrical equipment. Part 1. General requirements for safety. 3. Collateral standard: General requirements for radiation protection in diagnostic X-ray equipment
GOST R 50267.28-95: Medical electrical equipment. Part 2. Particular requirements for the safety of X-ray source assemblies and X-ray tube assemblies for medical diagnosis
GOST R 50267.32-99: Medical electrical equipment. Part 2. Particular requirements for the safety of associated equipment of X-ray equipment
GOST R 50267.47-2004: Medical electrical equipment. Part 2. Particular requirements for the safety, including essential performance, of ambulatory electrocardiographic systems
GOST R 51362-99: Dry-cleaning machines. Graphical symbols for use on equipment
GOST R IEC 60613-99: Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnosis
The Document is Referenced By:
GOST R IEC 60601-2-43-2008: Medical electrical equipment. Part 2-43. Particular requirements for the safety of X-ray equipment for interventional procedures
GOST R IEC 62220-1-2006: Medical electrical equipment. Characteristics of digital X-ray imaging devices. Part 1. Determination of the detective quantum efficiency
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.