GOST 10198-91

ГОСТ 10198-91

Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

Ящики деревянные для грузов массой св. 200 до 20000 кг. Общие технические условия

Status: Effective - Supersedes. IUS 6-1991

The standard applies to collapsible and non-collapsible wooden boxes with slats and lumber frame parts and plywood or fiberboard cladding for loads weighing more than 200 to 20000 kg. The standard is used in the development of regulatory and technical documentation for board boxes for loads weighing up to 500 kg, if the overall dimensions of the boxes exceed 1200x800x1200 mm.

Стандарт распространяется на разборные и неразборные дощатые ящики с планками и деталями каркаса из пиломатериалов и обшивкой из фанеры или древесноволокнистой плиты для грузов массой свыше 200 до 20000 кг. Стандарт применяется при разработке нормативно-технической документации на дощатые ящики для грузов массой до 500 кг, если габаритные размеры ящиков превышают 1200х800х1200 мм.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 54

Approved: USSR State Committee for Product Quality and Standards Management, 3/13/1991

SKU: RUSS73398

Price: $465.30

English keywords: boxes; cargo; trellised container;



The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 55 Packing and placement of goods »

Standards for pipe fittings (TPA) » 10. Production » 10.9 Packaging, storage, transportation »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.6 Testing and control of wood products » 4.6.3 Tara wood »

ISO classifier » 55 PACKAGING AND DISTRIBUTION OF GOODS » 55.160 Mailboxes. Boxes. Crates »

National standards » 55 PACKAGING AND DISTRIBUTION OF GOODS » 55.160 Mailboxes. Boxes. Crates »

National Standards for KGS (State Standards Classification) » Latest edition » D Vehicles and packaging » D7 Wooden, paper, cardboard containers » D71 Wooden boxes »


As a Replacement Of:

GOST 10198-78: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 26014-83: Boxes of wood and wood sheet materials for goods weighing over 200 to 20,000 kg. General specifications

The Document References:

GOST 103-76: Hot-rolled steel strip. Dimensions

GOST 2140-81: Visible defects, of wood. Classification, terms and definitions, methods of measurement

GOST 2695-83: Sawn timber of leaf-bearing species

GOST 2697-83: Roofing asphalt felt. Specifications

GOST 3282-74: General-purpose low-carbon steel wire. Specifications

GOST 3560-73: Sealing tepe

GOST 380-2005: Common quality carbon steel. Grades

GOST 3916.1-96: Plywood with external layers of deciduous veneer for general use

GOST 3916.2-96: General purpose plywood with coniferous veneer

GOST 4028-63: Building nails. Construction and dimensions

GOST 4029-63: Round roofing felt nails. Construction and dimensions

GOST 4034-63: Round box nails. Construction and dimensions

GOST 4598-86: Fibre boards. Specifications

GOST 503-81: Cold-rolled low-carbon steel strip. Specifications

GOST 515-77: Bitumized and tarred packaging paper

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 5915-70: Hexagon nuts, product grade B. Construction and dimensions

GOST 5927-70: Hexagon nuts (high precision). Construction and dimensions

GOST 6449.1-82: Products of wood and wooden materials. Tolerance zones for linear dimensions and recommended fits

GOST 6617-76: Petroleum construction bitumen

GOST 6958-78: Enlarged washers. Product grades A and C. Specifications

GOST 7016-82: Products of wood and wooden materials. Parameters of surface roughness

GOST 7798-70: Hexagon bolts, product grade B. construction and dimensions

GOST 7808-70: Hexagon bolts with reduced head, product grade A. Construction and dimensions

GOST 8486-86: Coniferous sawn timber. Specifications

The Document is Referenced By:

GOST 10092-2006: Cupro-nickel tubes for heat-exchange apparatus. Specifications

GOST 10092-75: Cupro-nickel tubes for heat-exchanging apparatus. Specifications

GOST 1018-2015: Aluminium, copper, brass and cupronickel strips for capsules. Specifications

GOST 10298-2018: Тechnical selenium. Specifications

GOST 10298-79: Technical selenium. Specifications

GOST 10352-80: Refractories for ships' boiler furnaces. Specifications

GOST 10617-83: Heating boilers with heat output heating capacity from 0.10 to 3.15 mw

GOST 10703-73: Aluminium sheets for graphic arts industry. Specifications

GOST 10708-82: Pendulum impact machines

GOST 10905-86: Surface plates and face-plates. Specifications

GOST 11004-84: Principal ventilation mine blowers

GOST 11383-75: Thin-walled copper and brass tubes

GOST 1150-2018: Boiler zinc plates. Specifications

GOST 1150-72: Boiler zinc plates. Specifications

GOST 11677-85: Power transformers

GOST 1173-2006: Copper foil, ribbons, sheets and plates. Specifications

GOST 1173-93: Copper strips. Specifications

GOST 11996-79: Batch-type mixers for rubber. General specifications

GOST 12.2.048-80: Occupational safety standards system. Saws and flat knives sharpening machines. Safety requirements

GOST 12.4.035-78: Protective face shields

GOST 12367-85: Tube mills of grinding units. General technical specifications

GOST 12375-70: Single-rotor crushers for coarse grinding

GOST 12376-71: Single rotor crusher for medium and small grinding. Specifications

GOST 12617-78: Ship's cargo winches. General specifications

GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements

GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications

GOST 12893-83: Single-seated, double-seated and cage control valves.

GOST 12996-90: Fork-type hauling chains

GOST 13236-83: Electrotechnical periclase powders. Specifications

GOST 13524-68: Wheels with solid types for railless transport. Specifications

GOST 13531-74: Concrete placers for precast reinforced concrete factories

GOST 13547-2015: Pipeline valves. Butterfly wicket valves. General specifications

GOST 13547-79: Butterfly valves for pnom up to 2.5 MPa (25 kgf/cm2)

GOST 13556-91: Building tower pillars building tower pillars

GOST 13981-87: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications

GOST 13996-93: Facade ceramic tiles and carpets of them. Specifications

GOST 14333-79: Rubber working mills. General specifications

GOST 14832-79: Refractory forsterite and forsteritechromite products. Specifications

GOST 14832-96: Refractory forsterite and forsteritechromite products. Specifications

GOST 14901-93: Moulds for the manufacture of industrial rubber articles

GOST 14955-77: Quality round steel with a special surface finish

GOST 15040-2016: Oxygen-free copper pipes. Specification

GOST 15040-77: Oxygen-free copper pipes

GOST 15515-2016: Nickel electrolyzed strips. Specifications

GOST 1566-96: Refractory silica products for electrical steel melting furnaces. Specifications

GOST 15841-88: Wooden boxes for the production of agricultural and tractor machine-building industry

GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage

GOST 15846-79: Products for transportation to the areas of the far north and remote regions

GOST 15850-84: Mine parachutes for cages

GOST 15851-84: Suspension devices for mine cages

GOST 15885-2018: Tin-zinc-lead bronze ribbons and strips. Specifications

GOST 1595-90: Aluminium-manganese bronze strips and ribbons. Specifications

GOST 16313-97: Electric motor frequency convertors with rated power up to 200 kW and frequency to 20000 Hz. General specifications

GOST 16349-85: Cyclic mixers for building materials

GOST 16357-83: Nonlinear resistor-type arresters for standard ac voltage

GOST 16518-96: Machine vice with hand and mechanical drives

GOST 16536-90: Wooden boxes for automotive industry products

GOST 17217-2018: Tubes of copper-nickel alloy МНЖ 5-1. Specifications

GOST 17217-79: Copper-nickel alloyed tubes grade Mnzh 5-1

GOST 1761-2016: Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications

GOST 1761-92: Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications

GOST 18051-83: Wooden containers for heat-insulating materials and products

GOST 18397-86: Ac high-voltage circuit breakers standard voltage 6-220 kv for frequent switching operations

GOST 18517-84: Garage compressors

GOST 18617-83: Wooden cases for hardware. Specifications

GOST 19261-98: Ship's side scuttles. Specifications

GOST 19263-73: Mains busways up to 1200 V, dc. General technical conditions

GOST 19716-81: Automatic pneumatic rapier looms

GOST 19734-80: Input control devices for residential and public buildings

GOST 20397-82: Technical facilities for minicomputers. General technical requirements, acceptance, methods of testing, marking, packaging, transportation and storage, manufacturer's warranties

GOST 20548-87: Heating hot-water boilers with heating outputs

GOST 20680-86: Vertical apparatuses with mechanical mixers

GOST 20900-2014: Copper tubing for waveguides and brass right angle tubes. Specifications

GOST 20901-75: Refractory and high-refractory products for laying of stoves and hot blast mains of blast furnaces. Specifications

GOST 2103-89: General purpose mobile belt conveyors

GOST 21345-2005: Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications

GOST 21345-78: Conical, ball and cylindrical cocks set at рnom of up to approx. 16 MPa ( 160 kgf/cm2)

GOST 21646-2003: Copper and brass tubes for heat-exchange apparatus. Specifications

GOST 21672-82: Ships rectangular windows. Specifications

GOST 21672-99: Ships rectangular windows. Specifications

GOST 21694-94: Mechanical welding equipment

GOST 2208-2007: Brass foil, ribbons, strips, sheets and plates. Specifications

GOST 22130-2018: Steel piping details. Movable supports and hangers. Specifications

GOST 22229-83: Ceramic through insulators for voltage over 1000 V. General specifications

GOST 22233-2001: Aluminium alloy extruded sections for translucent envelopes. General specifications

GOST 22233-2018: Aluminium alloy extruded sections for translucent envelopes. Specifications

GOST 22442-77: Refractory articles for stabilizing gas burner chambers. Specifications

GOST 22584-88: Rope electric hoists. Specifications

GOST 22584-96: Electric rope hoists

GOST 22786-77: Bimetallic weldless tubes for shipbuilding

GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)

GOST 22827-85: General purpose self-propelled boom cranes

GOST 22859-77: Hydraulic auto hoisters

GOST 228-79: Anchor chains

GOST 22897-86: Seamless cold-deformed pipes from alloys based on titanium. Specifications

GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods

GOST 23619-79: Refractory heat-insulating mullite-silica glass-fibrous materials and products. Specifications

GOST 23833-95: Commercial refrigeration equipment

GOST 24030-80: Seamless pipes from corrosion-resistant steel for power plant industry

GOST 24624-81: Hydraulic presses for gluing of soles to the footwear

GOST 24634-81: Wooden boxes for export products. General specifications

GOST 24717-2004: Refractories and refractory raw materials. Marking, packing, transportation and storage

GOST 24717-94: Refractories and refractory raw materials. Marking, packing, storage and transportation

GOST 24866-99: Sealed insulating glass units. Specifications

GOST 25051.4-83: Electrodynamic vibration testing equipment. General specifications

GOST 25054-81: Forgings made of corrosion-resistant steels and alloys

GOST 26032-83: System of standardized type structures of SSI aggregated complexes. General specifications

GOST 26057-84: Balanced manipulators

GOST 26118-84: Electric energy semiconductor converters with power 5 kV.A and higher. Marking, packing, transportation and storage

GOST 2622-75: Manometric tubes made of bronze БрОФ4-0,25 and brass Л63. Specifications

GOST 26251-84: Galvanium anodes for corrosion protection. Specifications

GOST 26358-84: Pig iron castings

GOST 26653-2015: Preparation of general cargoes for transportation. General requirements

GOST 26653-90: Preparation of general cargoes for transportation. General requirements

GOST 26698.2-93: Underground drill rigs

GOST 26699-98: Underground drilling rigs. General specifications and test methods

GOST 26917-2000: Underground loading machines. General technical requirements and test methods

GOST 26980-95: Single bucket excavators. General specifications

GOST 27412-93: Jaw crushers

GOST 27584-88: Electric overhead travelling cranes and gantry cranes. General specifications

GOST 27590-2005: House-tube water-watered heat supply systems. General specifications

GOST 27636-95: Stone extraction and processing equipment

GOST 28300-2010: Cardan shafts of traction drive of diesel locomotives and diesel trains. General specifications

GOST 28300-89: Cardan shafts of traction drive of diesel locomotives and diesel trains. Types, main parameters and dimensions, technical requirements

GOST 28433-90: Retrievers

GOST 28434-90: Overhead travelling stacker cranes

GOST 28468-90: Refractory products for electric-arc steel-melting furnace lining. Specifications

GOST 28679-90: Steam-water heaters for heat supply systems

GOST 28785-90: Preparative ultracentrifuges and rotors

GOST 2936-2016: Planc-oval scamless radiator tubes. Specifications

GOST 2936-75: Plane-oval seamless radiator tubes

GOST 30137-95: Horizontal jigging conveyers. General specifications

GOST 30195-94: Submersible asynchronous electric motors

GOST 30223-95: Motorised conveyor drums. General specifications

GOST 30273-98: Circular and rectangular electromagnetic chucks. General specifications

GOST 30275-96: Manipulators for contact spot welding. General specifications

GOST 30340-2012: Corrugated chrysotile cement sheets. Specifications

GOST 30340-95: Asbestos-cement corrugated sheets. Specifications

GOST 30540-97: The equipment for manufacture of products from cellular autoclaved concrete. General specifications and control methods

GOST 30685-2000: Honing and lapping vertical machines. General specifications

GOST 30872-2002: Air cooling machines. General specifications

GOST 31.0151.01-90: Universal and special-purpose setters

GOST 31294-2005: Direct-acting safety valves. General specifications

GOST 31366-2008: Brass rods for free machining purposes. Specifications

GOST 32568-2013: Glass units for vehicles grazing. Specifications

GOST 32590-2013: Fittings of copper and copper alloys with ends for capillary soldering or capillary brazing to copper tubes. Specifications

GOST 32591-2013: Fittings of copper and copper alloys with compression ends for use with copper tubes. Specifications

GOST 32598-2013: Tubes copper round for water and gas. Specifications

GOST 32662-2014: Polymer composite components of the ventilating equipment. Specifications

GOST 32663-2014: Polymer composite components of the pumps for special purpose. Specifications

GOST 32676-2014: Smoothing reactors for railway traction substation. General specifications

GOST 33164.1-2014: Mining equipment. Longwall powered roof shocks. Section of support. General specifications

GOST 33170-2014: Hoisting cranes. Tower cranes. Devices for installation. General requirements

GOST 33369-2015: Fibre-reinforced thermosets for the strengthening and restoration of building structures. General specifications

GOST 33423-2015: Pipeline valves. Swing and lift check valves. General specifications

GOST 34289-2017: Pipeline valves. Gate valves of thermoplastics materials. General specifications

GOST 34290-2017: Pipeline valves. Diaphragm valves of thermoplastics materials. General specifications

GOST 34291-2017: Pipeline valves. Check valves of thermoplastics materials. General specifications

GOST 34292-2017: Pipeline valves. Ball valves of thermoplastics materials. General specifications

GOST 34293-2017: Pipeline valves. Metal ball valves for petroleum, petrochemical and allied industries. General specifications

GOST 34294-2017: Cryogenic pipeline valves. General specifications

GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions

GOST 34433-2018: Trunk pipelines for oil and oil products transportation. Transformer complete substations with voltage from 35 to 220 kV. General specifications

GOST 34470-2018: Concrete refractory. General technical conditions

GOST 3910-75: Refractory silica products for brickwork of glassmaking furnaces. Specifications

GOST 4157-79: Silica brick refractories. Specifications

GOST 4295-80: Boxes made of boards for sheet glass

GOST 4442-2014: Bands and strips of lead brass. Specifications

GOST 4748-92: Silicon-manganese bronze strips and ribbons. Specifications

GOST 474-90: Acid-proof brick. Specifications

GOST 494-2014: Brass tubes. Specifications

GOST 494-90: Pipes of brass

GOST 495-92: Copper sheets and ribbons. Specifications

GOST 5.1800-73: Plants for water final refinements of УФ-400А type. Quality requirements of certified products

GOST 5.1878-73: Grinding burnishing six-spindel machine-tool model 6ШП-100М. Quality requirements for certified products

GOST 5.1879-73: Semi-automatic centre machine model ЦС-50. Quality requirements for certified products

GOST 5.2050-73: Aircompressor ТВ-80-1,6. Quality requirement of certified products

GOST 5040-78: Light-weight heat-insulating refractory and high-refractory products. Specifications

GOST 5040-96: Lightweight heatinsulating refractory and high-refractory products. Specifications

GOST 5187-2003: Nickel silver, german silver and monel tapes. Specifications

GOST 5381-93: High refractory chromepericlase products. Specifications

GOST 5500-2001: Stopper refractories for steel pouring from ladle. Specifications

GOST 5500-75: High-duty and refractories for steel pouring. Specifications

GOST 5534-79: Floating cranes. Specifications

GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications

GOST 5761-74: Valves for nominal pressure

GOST 5762-2002: Pipeline industrial valves. Gate valves PN<=250. General specifications

GOST 5762-74: Pipeline industrial valves. Gate valves PN £ 250. General specifications

GOST 5862-79: Ceramic insulators and covers for voltage over 1000 V. General specifications

GOST 588-81: Hauling leaf chains

GOST 589-85: Detachable conveyor chains

GOST 5976-90: Centrifugal fans for general use

GOST 598-90: General-purpose zinc sheets. Specifications

GOST 6113-84: Horizontal expellers for pottery ware

GOST 617-2006: General-purpose copper and brass tubes of round section. Specifications

GOST 617-90: Copper tubes. Specifications

GOST 618-2014: Aluminum foil for technical purposes. Specifications.

GOST 6625-85: Mine local ventilating fans

GOST 6688-2016: Brass bars of rectangular section. Specifications

GOST 6688-91: Brass bars of rectangular section. Specifications

GOST 6815-79: Mains and distribution busways up to 1000 V a.c. General specifications

GOST 7075-80: Manual Traveling Underrunning Cranes Specifications

GOST 7151-74: Refractory alumino-silicate block products for glassmaking furnaces. Specifications

GOST 745-2003: Aluminium foil for packing. Specifications

GOST 745-2014: Aluminium foil for packing. Specifications

GOST 7566-2018: Metal product. Rules of acceptance, marking, packing, transportation and storage

GOST 7566-94: Metal products

GOST 7599-82: Machine-tools, metal-working

GOST 7890-93: Travelling single girder suspended cranes. Specifications

GOST 8036-2013: Strips of brass Л90. Specifications

GOST 8054-81: Metal propellers. General specifications

GOST 8339-84: Oil pressure installations for hydraulic turbines

GOST 8390-84: Electro hydraulic presses for blocking

GOST 8907-87: Sandblast core casting machines

GOST 89-2018: Rolled-in lead sheets. Specifications

GOST 89-73: Rolled-in lead sheets. Specifications

GOST 9.510-93: Unified system of corrosion and ageing protection. Aluminium and aluminium alloys semifinished products. General requirements for temporary anticorrosive protection, packing, transportation and storage

GOST 9074-85: Joined by pins slot cloths

GOST 9193-77: Warping machines Technical conditions

GOST 9231-80: Twin-shaft blenders of paddle type

GOST 9274-81: Rolls for stone separating and ceramic mixture grinding

GOST 931-90: Brass sheets and strips. Specifications

GOST 9559-89: Lead sheets. Specifications

GOST 961-89: Acid-resistant and thermostable acid-resistant ceramic tiles. Specifications

GOST 9887-70: Diaphragm pneumatic actuators SSI. General specifications

GOST R 50059-92: Travelling single-girder suspended cranes. Specifications

GOST R 50139-92: Processing equipment. General specifications

GOST R 50703-2002: Heading machines having cutter heads mounted on booms. General technical requirements and test methods

GOST R 51260-2017: Rehabilitation aids trainers. General technical requirements

GOST R 51260-99: Rehabilitation simulators for disabled persons. General specifications

GOST R 51364-99: Air cooling apparatus. General specifications

GOST R 51573-2000: Tubes from alloyed brasses for heat-exchange apparatus. Specifications

GOST R 51764-2001: Rehabilitation transportation boarding devices for disabled persons. General technical requirements

GOST R 52034-2003: Ceramic support insulators for voltage over 1000 V. General specifications

GOST R 52034-2008: Ceramic support insulators for voltage over 1000 V. General specifications

GOST R 52123-2003: Port-holes for diving hyperbaric chambers with operating pressure up to 4,9 MPa (50 kgf/sq cm). General specifications

GOST R 52172-2003: Glass units for vehicles glazing. Specifications

GOST R 52218-2004: Shaft sinking winches. General technical requirements and test methods

GOST R 52264-2004: Pressure diving chambers. General specifications

GOST R 52286-2004: Push-chairs for carrying disabled persons. Main parameters. Technical requirements

GOST R 52318-2005: Round copper tubes for water and gas. Specifications

GOST R 52565-2006: Alternating-current circuit-breakers for voltages from 3 to 750 kV. General specifications

GOST R 52597-2006: Brass rods for free machining purposes. Specifications

GOST R 52630-2006: Steel welded vessels and apparatus. General specifications

GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.

GOST R 52707-2007: Refractories for steel pouring. Refractory products for slide gates of casting ladles. Specifications

GOST R 52768-2007: Centrifuges for industries working with radioactive media. General technical requirements and test methods

GOST R 52779-2007: Polyethylene fittings for gas pipelines. General specifications

GOST R 52801-2007: Refractories for steel casting. Refractory products for continuous steel casting. Specifications

GOST R 52922-2008: Fittings from copper and copper alloys for capillary soldering to copper tubes. Specifications

GOST R 52948-2008: Fittings from copper and copper alloys with compression ends for use with copper tubes. Specifications

GOST R 53471-2009: Synchronous three-phase generators of power above 100 kW. General specifications

GOST R 53499-2009: Tombac strips. Specifications

GOST R 53648-2009: Underground diesel locomotives. General technical requirements and test methods

GOST R 53671-2009: Pipeline valves. Swing and lift check valves. General specifications

GOST R 53673-2009: Pipeline valves. Butterfly wicket valves. General specifications

GOST R 54086-2010: Pressure regulators. General specifications

GOST R 54158-2010: Thin-walled tubes from copper and copper alloys. Specifications

GOST R 54568-2011: Tubes from alloy МНЖ5-1. Specifications

GOST R 54771-2011: Mine electric locomotive transport. Trolley electric locomotives. General technical requirements and test methods

GOST R 54774-2011: Underground monorail diesel powered transport. General technical requirements and test methods

GOST R 54927-2012: Polymer composite sheet for special purpose. General technical requirements

GOST R 55158-2012: Mining equipment. Haulage and shunting mining winches. General technical requirements and test methods

GOST R 55159-2012: The mountain-mine equipment. Underground loading machines. General technical requirements and test methods

GOST R 55260.3.1-2013: Hydro power plants. Part 3-1. Hydraulic turbines. Procurement specification

GOST R 55429-2013: Hoop-in detachable joints of pipelines. Design, dimensions and general specifications

GOST R 55599-2013: High pressure pipeline assembly units and components above 10 up to 100 MPa. General technical requirements

GOST R 55727-2013: Mining equipment. Mine loading cars. General technical requirements and test methods

GOST R 55730-2013: Mining equipment. Loading-transport machines. General technical requirements

GOST R 55737-2013: Mining equipment. Mine electric locomotive transport. Accumulator electric locomotives. General technical requirements and test methods

GOST R 55760-2013: Generating sets driven by internal combustion engines. Rules of marking, packing, transportation and storage

GOST R 55852-2013: Draft machine. General operating specification

GOST R 55853-2013: Medium speed roller mill. Types, critical parameters, specification

GOST R 56552-2015: Floating cranes. Specifications

GOST R 57214-2016: Glazing products for railway rolling stock. General specification

GOST R 57217-2016: Medical multi-place hyperbaric chambers with operating pressure 1, 0 MPa. General technical requirements

GOST R 57530-2017: Medical equipment for hyperbaric chambers under pressure. General technical requirements

GOST R 57548-2017: Vacuum induction melting for obtaining products with single-crystal structure. Technical requirements

GOST R 57549-2017: Vacuum induction melting for obtaining products with polycrystalline structure. Technical requirements

GOST R 57736-2017: Mining equpment. Mine auxiliary fans. General specifications

GOST R 57894-2017: Equipment for electron beam processing. General requirements

GOST R 57895-2017: Equipment for radial acceleration dispersal. General requirements

GOST R 57896-2017: Equipment for zone refining of refractory metal without crucible. General requirements

GOST R 57897-2017: Units for ceramic core’s removal. General requirements

GOST R 58088-2018: Mining equipment. Mine parachutes for cages. Specifications

GOST R 58089-2018: Mining equipment. Suspension gears for mine cages. General specifications

GOST R 58097-2018: Flexible reinfonced plastic pipes with thermal insulation and fittings for them for district heating and water-supply networks. General specification

ONTP 02-86: National Engineering Design Standards for Machine-Building, Instrument-Building, and Metalworking Facilities. Woodworking Shops

ONTP 02-94: Sectoral norms of technological design of enterprises in the automotive industry. Woodworking shops (sites)

OST 2 R31-5-89: Metal cutting machines. Ball screw gears. Technical conditions

OST 2 Р31-5-89: Ball screw. Specifications.

OST 24.090.39-78: Shell stacker cranes. Specifications.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26-01-147-89: Drying devices with rotating drums. General technical requirements.Printing telegraph and terminals for document electric communication. Methods of printed character parameter measurement.

OST 26-01-49-82: Assembling units and pipeline details for working pressure of 32 MPa (320 kgf/cm2). General specifications.

OST 26-02-376-78: Technological units of gas and oil industry. General technical requirements.

OST 26-04-280-93: Pipeline fittings of cryogenic equipment products. General specifications.

OST 26-18-5-88: Technological units of gas and oil industry. General technical requirements.

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

OST 36-13-90: Shields and consoles of automation systems for technological processes. General technical conditions

OST 95 10439-2002: Equipment for radioactive environments. General technical requirements. Acceptance. Maintenance and repair.

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PNST 296-2018: Mining. Points of switching in self-rescuers. General technical requirements

RD 10-33-93: Slings for loading and general purposes. Requirements for arrangement and safe operation.

RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing

RD 22-207-88: Lifting machines. General requirements and production standards

RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.

RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus

RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.

RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities

RD 36-62-00: Hoisting equipment. General technical requirements.

ST TsKBA 006-2003: Pipe fittings. Cryogenic fittings. General technical conditions

ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual

TU 102-360-85: Aluminum aluminum masts for radio relay communication type MAP

TU 13-353-77: Remote strips P-16. Technical conditions

TU 14-8-440-83: Refractory Thermal Insulating Slabs Made from Mullite-Silicon Wool on Clay and Organic Binders

TU 26-02-1089-88: Type 1-AVG horizontal air coolers Technical conditions

TU 26-02-1098-89: Heat exchangers, shell and tube made of titanium. Technical conditions

TU 26-05-39-85: Ramp acetylene discharge with protective device PAP-15

TU 34-38-20121-87: Oil inlets. General technical conditions for major repairs

TU 34-38-20140-94: Valves of gas pipelines TPP. General technical conditions for major repairs

TU 34-38-20365-94: Power valves. General technical conditions for major repairs

TU 36.22.19.05-005-85: Selective pressure measuring devices. Technical conditions

TU 36.26.11.01-06-92: Windows and bindings of light emitting lamps. Technical conditions

TU 36-1496-85: Cable prefabricated structures. Technical conditions

TU 36-2072-86: Boxes of lingering. Technical conditions

TU 36-2199-79: Lifting equipment. Overhaul

TU 36-2203-84: Racks of radio transmission lines and additional products to them. Technical conditions

TU 4218-008-51216464-01: Selection device. Technical conditions

GOST 13996-2019: Ceramic tiles. General specifications

GOST 598-2020: General purpose zinc sheets. Specifications

GOST 6235-2020: Nickel sheets and strips. Specifications

GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications

GOST R 51764-2019: Rehabilitation lifting transport devices for disabled people. General technical requirements

GOST R 52286-2019: Wheelchairs are transport rehabilitation. Main settings. Technical requirements

GOST R 55473-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 1. Polyethylene gas pipelines

GOST R 58344-2019: Earthing switches and grounding devices for various purposes. General technical requirements for anode grounding of electrochemical corrosion protection installations

GOST R 58365-2019: DC switches for voltages above 1000 V for traction substations and linear devices for traction power supply of the railway. General specifications

GOST R 58493-2019: Mining equipment. Drilling machines. General technical requirements and test methods

GOST R 58618-2019: The main pipeline transport of oil and oil products. Tank equipment. Breathing and safety valves. General specifications

GOST R 58619-2019: The main pipeline transport of oil and oil products. Tank equipment. Pontoons. General specifications

GOST R 58620-2019: The main pipeline transport of oil and oil products. Tank equipment. Acceptance devices for tanks. General specifications

GOST R 58640-2019: Axial fans for general use. General specifications

GOST R 58641-2019: General-purpose radial fans. General specifications

GOST R 58729-2019: Protections of ice hockey rinks. Technical specifications

GOST R 58935-2020: Forms for the manufacture of reinforced concrete vibrohydropressed pressure pipes. Specifications

OST 1-00817-76: Steps for stairs and ladders. Technical specifications

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Aviation turbine fuels. Determination of lubricity by the ball-on-cylinder lubricity evaluator (BOCLE)
Language: English
Price: $309.43
Aviation turbine fuel. Determination of acidity
Language: English
Price: $218.25
Petroleum products. Determination of color by Saybolt chromometer
Language: English
Price: $218.25
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Aviation fuels. Calculating net calorific value
Language: English
Price: $179.45
Aviation fuels. Calculating net calorific value
Language: English
Price: $192.06
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
Security of Financial (banking) Operations. Information Protection of Financial Organizations. Basic Set of Organizational and Technical Measures
Language: English
Price: $843.90
Construction in seismic regions of Ukraine
Language: English
Price: $5,909.85
Aviation turbine fuels and kerosine. Determination of smoke point
Language: English
Price: $270.63
Distillate fuels. Determination of free water and particulate contamination by visual inspection method
Language: English
Price: $165.87
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!