GOST 1639-2009

ГОСТ 1639-2009

Non-ferrous metals and alloys scrap and waste. General specifications

Лом и отходы цветных металлов и сплавов. Общие технические условия

Status: Not effective - Canceled in the Russian Federation. Registration information 140-st dated 03/15/2017 (Rosstandart official website); IUS 6-2017

Distributed to scrap and waste non-ferrous metals and alloys, intended for further mechanical and metallurgical processing.

Распространяется на лом и отходы цветных металлов и сплавов, предназначенные для дальнейшей механической и металлургической переработки

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 7/9/2010

SKU: RUSS73422

Price: $685.08




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

PromExpert » SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE » II Ensuring environmental safety » 3 Hazardous Waste Management » 3.3 Requirements for waste management in implementation of activities » 3.3.2 Requirements for waste producers in carrying out waste management activities » 3.3.2.5 Requirements for processing, processing and storage of secondary material resources »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.3 Non-ferrous and precious metals »

ISO classifier » 77 METALLURGY » 77.120 Non-ferrous metals » 77.120.01 Non-ferrous metals in general »

National standards » 77 METALLURGY » 77.120 Non-ferrous metals » 77.120.01 Non-ferrous metals in general »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V5 Non-ferrous metals and their alloys. Rolled non-ferrous metals » V57 Secondary non-ferrous metals, alloys and waste »


As a Replacement Of:

GOST 1639-93: Non-ferrous metals and alloys scrap and waste. General specifications

The Document References:

GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles

GOST 1.2-2009: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Rules for development, taking over, application, renovation and cancellation

GOST 10354-82: Polyethylene film Specifications

GOST 10396-84: Crepe cable paper

GOST 11427-75: Blacksmith's hand and hammer tools. Round split swages. Design and dimensions

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.1.010-76: Explosion safety. General requirements

GOST 12.1.016-79: Work area air

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 12.2.007.10-87: Occupational safety standards system. Installations, generators and induction heaters for electrothermics, ultrasonic installations and generators. Safety requirements

GOST 12.2.007.11-75: Occupation safety standards system. Semiconductor converters of electric energy. Safety requirements

GOST 12.2.007.12-88: Chemical current sources

GOST 12.2.007.13-2000: Occupation safety standards system. Electric lamps. Safety requirements

GOST 12.2.007.13-88: Electric light bulbs

GOST 12.2.007.14-75: Cables and cable fittings. Safety requirements

GOST 12.2.007.1-75: Occupation safety standards system. Rotating electric machines. Safety requirements

GOST 12.2.007.2-75: Occupation safety standards system. Power transformers and reactors. Safety requirements

GOST 12.2.007.3-75: Occupational safety standard system. Electrotechnical devices for voltage more than 1 000 v

GOST 12.2.007.4-75: Cabinets for switchgear and control gear and unitized transformer substations

GOST 12.2.007.4-96: Operation safety standard system. Unsealed cabinets for compact distributing devices and complete transformer substations. Safety requirements

GOST 12.2.007.5-75: Occupation safety standards system. Safety requirements. Power capacitors. Capacitor installations

GOST 12.2.007.6-75: Occupation safety standards system. Safety requirements. Switching devices for voltages below 1000 v

GOST 12.2.007.6-93: System of labor safety standards Electric commuting apparatuses with the voltage up to 1000 V. Safety requirements.

GOST 12.2.007.8-75: Devices for electric welding and plasma treatment

GOST 12.2.007.9-93: Electric heating equipment safety

GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements

GOST 12.4.004-74: Filtering protective mask RPG-67

GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance

GOST 12.4.010-75: Means of individual protection protective mittens

GOST 12.4.013-85: Occupational safety standards system. Goggles. General specification

GOST 12.4.021-75: Ventilation systems. General requirements

GOST 12.4.026-76: Signal colors and safety signs

GOST 12.4.028-76: Respirators шб-1 "lepestok"

GOST 12.4.029-76: Special aprons

GOST 12.4.068-79: Occupational safety standards system. Dermatologic personal safety means. Classification and general requirements

GOST 14113-78: Aluminium antifriction alloys. Grades

GOST 14192-96: Cargo marking

GOST 1639-93: Non-ferrous metals and alloys scrap and waste. General specifications

GOST 16511-86: Wooden boxes for electrical equipment. Specifications

GOST 166-89: Vernier callipers. Specifications

GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises

GOST 17.4.2.01-81: Nature protection. Soils. Nomenclature of sanitary conditions indices

GOST 17366-80: Welded thick-walled steel barrels for chemical products

GOST 17811-78: Polyethylene bags for chemical products. Specifications

GOST 18165-89: Drinking water. Method for determination of aluminium mass concentration

GOST 18293-72: Drinking water. Methods for determination of lead, zinc and silver content

GOST 18308-72: Drinking water. Method for determination of molybdenum content

GOST 18477-79: Universal containers

GOST 18777-80: Round cross-bars. Design and dimensions

GOST 18978-73: Scrap and waste of non-ferrous metals and alloys. Terms and definitions

GOST 19433-88: Dangerous goods. Classification and marking

GOST 2.427-75: Unified system for design documentation. Rules for making working drawings of sprockets for round-link chain wheels

GOST 21130-75: Electrical articles. Grounding terminals and grounding signs

GOST 21575-91: Corrugated board boxes for fluorescent lamps. Specifications

GOST 2171-90: Pieces, products, semi-finished products and billets of non-ferrous metals and alloys. Grade designation

GOST 22171-90: Laboratory conductometric analysers of liquid. General specifications

GOST 2226-88: Paper bags

GOST 2228-81: Paper for bags

GOST 24634-81: Wooden boxes for export products. General specifications

GOST 26653-90: Preparation of general cargoes for transportation. General requirements

GOST 28053-89: Chips of non-ferrous metals and alloys. Methods of sampling, sample preparation and test methods

GOST 28166-89: Monogerm sugar beet seeds. Requirements for state purchases

GOST 28192-89: Waste of non-ferrous metals and alloys. Methods of sampling, sample preparation and test methods

GOST 2874-82: Drinking water. Hygienic requirements and quality control

GOST 29250-91: Unbleached rough linen and semi-linen fabrics, ravenducks and canvas. Specifications

GOST 29329-92: Balance for static weightings

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 4388-72: Drinking water. Methods for determination of copper mass contentration

GOST 4658-73: Mercury. Specifications

GOST 5044-79: Thin-walled steel drums for chemical products

GOST 5272-68: Corrosion of Metals. Terms

GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications

GOST 6128-81: Metal cans for chemical products

GOST 6247-79: Steel welded barrels with rolling hoops on the shell

GOST 6309-93: Cotton and synthetic threads for sewing. Specifications

GOST 7502-98: Measuring metal tapes. Specifications

GOST 8.010-90: State system for ensuring the uniformity of measurements. Procedures of measurements

GOST 8.010-99: State system for ensuring the uniformity of measurement. Measurement procedures. General provisions

GOST 8427-75: Longitudinally turning automatic machines. Basic dimensions

GOST 8777-80: Tight and slack wooden barrels

GOST R 12.4.013-97: Occupational safety standards system. Goggles. General specifications

GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods

GOST R 51232-98: Drinking water. General requirements for organization and quality control methods

GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests

The Document is Referenced By:

GOST 12.2.063-2015: Pipeline valves. General safety requirements

GOST 2.601-2013: Unified system for design documentation. Exploitative documents

GOST 22235-2010: Freight cars for 1520 mm gauge main line railways. General requirements for safety in loading-unloading and shunting operations

GOST 26653-2015: Preparation of general cargoes for transportation. General requirements

GOST 28053-89: Chips of non-ferrous metals and alloys. Methods of sampling, sample preparation and test methods

GOST 28192-89: Waste of non-ferrous metals and alloys. Methods of sampling, sample preparation and test methods

GOST 33368-2015: Oil and oil products trunk pipeline transportation. Filters. General technical specifications

GOST 33748-2016: Aluminium cans of deep drawing with easy open end. General specifications

GOST 34612-2019: Pipe fittings. Passport. Rules for development and design

GOST R 53672-2009: Pipeline valves. General safety requirements

GOST R 53692-2009: Resources saving. Waste treatment. Stages of technological cycle of waste

GOST R 56222-2014: Resources saving. Waste treatment. Material related terms and definitions

POT R O-14000-001-98: Rules on labor protection at enterprises and organizations of mechanical engineering

POT R O-14000-007-98: Ordinance - Occupational Safety and Health for Material Storage

RD EO 1.1.2.05.0929-2013: Guidelines for acceptance inspections at manufacturing plants and entrance control at NPP of 1st, 2nd and 3rd security class equipment

ST TsKBA 031-2009: Pipe fittings. Passport. Development and design rules

ST TsKBA 031-2015: Pipeline valves and actuators for it. Passport. Development and design rules

Customers Who Viewed This Item Also Viewed:

Steel structures
Language: English
Price: $297.00
Concrete with polysterene aggregates. Specifications
Language: English
Price: $308.76
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Guidance on the selection of precautionary statements for the labelling in accordance with GOST 31340-2013
Language: English
Price: $301.95
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers
Language: English
Price: $287.10
Seismic building design code
Language: English
Price: $594.00
Aviation fuel for gas turbine engines JET A-1 (Jet A-1). Specifications
Language: English
Price: $150.66
On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"
Language: English
Price: $819.95
Noxious substances. Classification and general safety requirements
Language: English
Price: $32.67
Safety valves of stream and hot-water boilers. Technical requirements
Language: English
Price: $57.42
Steam and hot-water boilers
Language: English
Price: $47.52
System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
Language: English
Price: $233.64
Manufacturing and quality control of steel structures for construction
Language: English
Price: $183.15
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $173.25
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Steel structures
Language: English
Price: $594.00
Buildings and structures foundations
Language: English
Price: $495.00
Pile foundations
Language: English
Price: $519.75
Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
Language: English
Price: $37.62

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!