GOST 31846-2012

ГОСТ 31846-2012

Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties

Специальный подвижной состав. Требования к прочности несущих конструкций и динамическим качествам

Status: Effective - Introduced for the first time. IUS 9-2013

This standard establishes the scope of calculations and tests for determining and evaluating the dynamics and strength of special rolling stock (hereinafter - ATP), including jib cranes (hereinafter referred to as CS) for commercial use, as well as emergency repair equipment. works This standard defines the requirements for ensuring the necessary indicators of the dynamics of the crew parts, the strength of the metal structures of the main frames, bodies, cabs, truck frames, pins, supporting structures of working parts, spring suspension elements, traction drive, wheel sets (wheel centers, tires, axles of wheel pairs and their joints), axle boxes, as well as fastening and insurance parts, which are necessary for reliable connection and keeping the working bodies in the transport position, protecting them from going out of position s dimensions and falling path. This standard does not apply to the constituent parts of the Constitutional Court, which are under the jurisdiction of the technical supervision of the states mentioned in the preface as having voted for the adoption of the interstate standard

Настоящий стандарт устанавливает объем расчетов и испытаний для определения и оценки показателей динамики и прочности специального подвижного состава (далее - СПС), в т. ч. стреловых кранов (далее - КС) на железнодорожном ходу хозяйственного назначения, а также предназначенных для выполнения аварийно-восстановительных работ. Настоящий стандарт определяет требования для обеспечения необходимых показателей динамики экипажных частей, прочности металлоконструкций главных рам, кузовов, кабин, рам тележек, шкворней, несущих конструкций рабочих органов, элементов рессорного подвешивания, тягового привода, колесных пар (колесных центров, бандажей, осей колесных пар и их соединений), букс, а также деталей крепления и страховки, которые необходимы для надежного соединения и удержания в транспортном положении рабочих органов, предохранения их от выхода за установленные габариты и падения на путь. Настоящий стандарт не распространяется на составные части КС, находящиеся в ведении технадзора государств, упомянутых в предисловии как проголосовавших за принятие межгосударственного стандарта

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 71

Approved: Federal Agency for Technical Regulation and Metrology, 11/26/2012

SKU: RUSS73423

Price: $906.00

The Product is Contained in the Following Classifiers:

Welding regulations » Main materials »

Welding regulations » Welding materials »

Welding regulations » Mechanical Testing »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Welding materials » Electrodes »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 001/2011 TR TS. On safety of railway rolling stock » Regulations and standards (to TR CU 001/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 003/2011 TR TS. On safety of railway infrastructure » Regulations and standards (for TR CU 003/2011) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.14 Testing and monitoring of vehicles and equipment » 4.14.3 Railway and tram locomotives, rail rolling stock »

ISO classifier » 45 RAILWAY ENGINEERING » 45.060 Rolling stock of railways » 45.060.10 Traction train »

National standards » 45 RAILWAY ENGINEERING » 45.060 Rolling stock of railways » 45.060.10 Traction train »

National Standards for KGS (State Standards Classification) » Latest edition » D Vehicles and packaging » D5 Rail transport » D55 Frames, units and parts of rolling stock of railways »

The Document References:

GOST 10052-75: Metal covered electrodes, for manual arc welding of high-alloyed steels with special properties. Types

GOST 10157-79: Gaseous and liquid argon. Specifications

GOST 10304-80: Rivets

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10791-2011: All-rolled wheels. Specifications

GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets

GOST 1215-79: Malleable iron castings

GOST 1412-85: Flakish graphite cast iron

GOST 1425-93: Lief springs for railway rolling stock. Technical requirements

GOST 1452-2011: Helical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications

GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel

GOST 14955-77: Quality round steel with a special surface finish

GOST 14959-79: Spring carbon and alloy steel bars. Specifications

GOST 1497-84: Metals. Methods of tension test

GOST 1583-93: Aluminium casting alloys. Specifications

GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications

GOST 1759.4-87: Bolts, screws and studs. Mechanical properties and test methods

GOST 18855-94: Rolling bearings. Dinamic load ratings and rating life

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 19905-74: Strengthening of hardware by surface chemical heat treatment. Contents of general requirements

GOST 21354-87: Cylindrical evolvent gears of external engagment. Strength calculation

GOST 21357-87: Castings made of cold- and wear- resistant steel

GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications

GOST 2246-70: Welding steel wire. Specifications

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22703-91: Moulded pieces of automatic coupler equipment for 1520 mm gauge railway rolling stock. General specifications

GOST 23207-78: Fatigue strength. Terms, definitions and symbols

GOST 26271-84: Flux-cored wire welding carbon and low-alloy steels. General specifications

GOST 27772-88: structural steel structure rolled products. General specifications

GOST 30803-2002: Transmission tooth gears of the traction main railway stock . Specifications

GOST 31334-2007: Axles for rolling stock of 1520 mm gauge railways. Specifications

GOST 31847-2012: Wheel sets for the special-purpose rolling stock. General specifications

GOST 380-2005: Common quality carbon steel. Grades

GOST 398-2010: Rough tyres for railway rolling stock. Specifications

GOST 4491-86: Cast wheel centers for the 1520 mm-gauge railroad rolling stock

GOST 4543-71: Structural alloyed steel

GOST 4728-2010: Axle billets for railway rolling stock. Specifications

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 5457-75: Dissolved acetylene and gaseous acetylene for technical purposes. Specifications

GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications

GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock

GOST 5583-78: Industrial and medical gaseous oxygen

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 6331-78: Industrial and medical liquid oxygen

GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications

GOST 7293-85: Cast iron with globular graphite for foundry

GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 8050-85: Carbon dioxide,

GOST 8479-70: Structural carbon and alloy steel forgings

GOST 8617-81: Pressed sections out of aluminium and aluminium alloys. Specifications

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9045-93: Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications

GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications

GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types

GOST 977-88: Steel castings. General specifications

The Document is Referenced By:

GOST 32216-2013: Special railway rolling stock. General technical requirements

GOST 32265-2013: Special railway rolling stok. Dynamic and strength testing procedures

GOST 34759-2021: Railway rolling stock. Norms for permissible exposure of railway track and test methods

Customers Who Viewed This Item Also Viewed:

Man-machine system. Operator's arm-chair. General ergonomic requirements
Language: English
Price: $73.00
Traction railway stock wheelsets of 1520 mm gauge railways. General specifications
Language: English
Price: $137.00
Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards
Language: English
Price: $332.00
Safety of machinery. Interlocking devices associated with guards. Principles for design and selection
Language: English
Price: $436.00
Seismic building design code
Language: English
Price: $594.00
Conformity assessment. The procedure for conducting inspection control in certification procedures
Language: English
Price: $491.82


RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!