GOST R 55509-2013
ГОСТ Р 55509-2013
|
|
Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials
Арматура трубопроводная. Металлы, применяемые в арматуростроении. Основные требования к выбору материалов
Status: Not effective - Canceled. Registration information 444-st dated May 26, 2015 (the official website of Rosstandart); IUS 2-2016
This standard applies to pipeline valves for various purposes (including general industrial, for hazardous production facilities, nuclear power plants, ship systems) and establishes the conditions for the use of metallic materials (hereinafter - materials) for the manufacture of the main parts of pipeline valves and actuators for it (except electric ). The standard provides requirements for the choice of materials for the manufacture of main parts of pipe fittings, as well as welding and surfacing materials, depending on the parameters of working media (working pressure, temperature, chemical composition and properties of the working medium) and operating conditions
Настоящий стандарт распространяется на трубопроводную арматуру различного назначения (в том числе общепромышленную, для опасных производственных объектов, атомных станций, судовых систем) и устанавливает условия применения металлических материалов (далее - материалов) для изготовления основных деталей трубопроводной арматуры и приводных устройств к ней (кроме электроприводов). В стандарте приведены требования к выбору материалов для изготовления основных деталей трубопроводной арматуры, а также сварочных и наплавочных материалов в зависимости от параметров рабочих сред (рабочего давления, температуры, химического состава и свойств рабочей среды) и условий эксплуатации
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
8/20/2013
SKU: RUSS73456
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
032/2013 TR CU. On safety of overpressure equipment »
Regulations and standards (to 032/2013 TR CU) »
Standards for pipe fittings (TPA) »
9. Materials for piping valves (TPA) »
9.1 Metals »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipe fittings »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipeline valves »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipe fittings »
23.060.01 Pipe fittings in general »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipeline valves »
23.060.01 Pipe fittings in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G1 General parts and units of machines »
G18 Fittings and pipeline connections »
The Document References:
GOST 10025-78: Tin-phosphor bronze rods. Specifications
GOST 10051-75: Metal covered electrodes for manual arc surfacing of upper layers with special properties types
GOST 10052-75: Metal covered electrodes, for manual arc welding of high-alloyed steels with special properties. Types
GOST 10160-75: Magnetically soft precision alloys
GOST 10498-82: Seamless extra thin-walled tubes of corrosion-resistant steel
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 1051-73: Calibrated quality steel
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 10994-74: Precision alloys. Grades.
GOST 11036-75: Electrotechnical quality unalloyed steel. Specifications
GOST 11069-2001: Primary aluminium. Grades
GOST 1173-2006: Copper foil, ribbons, sheets and plates. Specifications
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.2.052-81: Occupational safety standards system. Equipment working with gaseous oxygen. General safety requirements
GOST 1208-90: Pressed bronze tubes
GOST 1215-79: Malleable iron castings
GOST 14117-85: Strip made from precision alloys for elastic elements
GOST 1412-85: Flakish graphite cast iron
GOST 1414-75: Construction steel with enhanced and high machinability
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 14959-79: Spring carbon and alloy steel bars. Specifications
GOST 14963-78: Doped steel spring wire
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15527-2004: Pressure treated copper zinc alloys (brasses). Grades
GOST 1577-93: Plate and broadband roll stock of construction fine steel.
GOST 15834-77: Wire from beryllium bronze
GOST 15835-70: Beryllium bronze bars. Specifications
GOST 1583-93: Aluminium casting alloys. Specifications
GOST 1585-85: Bearing cast iron for molding
GOST 16118-70: Cylindrical helical compression (extension) springs made of round steel. Specifications
GOST 1628-78: Bronze rods. Specifications
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 17711-93: Cast copper-zink alloys (brass). Grades
GOST 18175-78: Tin-free pressure-worked bronzes. Grades
GOST 19241-80: Wrought nickel and low-alloy nickel. Grades
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 19807-91: Wrought titanium and titanium alloys. Grades
GOST 20072-74: Heat-resistant steel
GOST 2060-2006: Brass rods. Specifications
GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications
GOST 21357-87: Castings made of cold- and wear- resistant steel
GOST 21448-75: Alloyed powders for welding deposit. Specifications
GOST 21449-75: Rods for welding deposit. Specifications
GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications
GOST 2170-73: Strips of nickel and nickel low alloys. Specifications
GOST 21744-83: Multilayer metal bellows. General specifications
GOST 21945-76: Seamless hot-rolled pipes from titanium-based alloys
GOST 21996-76: Cold-rolled heat treated steel-cord belt
GOST 21997-76: Steel flattened strip of high strength
GOST 2208-2007: Brass foil, ribbons, strips, sheets and plates. Specifications
GOST 22178-76: Titanium and titanium alloys sheets. Specifications
GOST 2246-70: Welding steel wire. Specifications
GOST 2283-79: Cold-rolled tape made of tool steel and spring steel
GOST 22897-86: Seamless cold-deformed pipes from alloys based on titanium. Specifications
GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage
GOST 23755-79: Plates of titanium and titanium alloys. Specifications
GOST 24030-80: Seamless pipes from corrosion-resistant steel for power plant industry
GOST 24982-81: Sheets of corrosion-resistant, heat-resistant and high-temperature alloys
GOST 25054-81: Forgings made of corrosion-resistant steels and alloys
GOST 2590-2006: Round hot-rolled steel bars. Dimensions
GOST 26358-84: Pig iron castings
GOST 26492-85: Titanium and titanium alloys rolled bars. Specifications
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 28919-91: Flange connections of wellhead equipment. Types, basic parameters and dimensions
GOST 3057-90: Disk springs. Specifications
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 3722-81: Rolling bearings. Balls. Technical requirements
GOST 3778-98: Lead. Specifications
GOST 380-2005: Common quality carbon steel. Grades
GOST 4543-71: Structural alloyed steel
GOST 4784-97: Aluminium and wrought aluminium alloys. Grades
GOST 492-2006: Nickel, nickel and copper-nickel alloys treated by pressure. Grades
GOST 493-79: Tin-free foundry bronzes. Grades
GOST 494-90: Pipes of brass
GOST 4986-79: Cold-rolled band from corrosion-resistant and heat-resistant steel
GOST 5017-2006: Wrought tin bronzes. Grades
GOST 5221-2008: Tin-zink bronze wire. Specifications
GOST 5222-72: Silicon-manganese bronze wire
GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance
GOST 613-79: Tin foundry bronzes. Grades
GOST 6235-91: Strips and ribbons of nickel. Specifications
GOST 6402-70: Lock washers. Specifications
GOST 7293-85: Cast iron with globular graphite for foundry
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 7419-90: Hot-rolled tool steel for springs
GOST 7769-82: Alloyed cast iron for castings with special properties
GOST 801-78: Bearing steel. Specifications
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 859-2001: Copper. Grades
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 9045-93: Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications
GOST 9389-75: Carbon steel spring wire
GOST 9433-80: Grease ЦИАТИМ-221. Specifications
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 9559-89: Lead sheets. Specifications
GOST 977-88: Steel castings. General specifications
GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel
GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel
GOST R 12.2.142-99: Occupational safety standards system. Refrigerating equipment of refrigerating capacity over 3,0 kW. Safety requirements
GOST R 50753-95: Cylindrical helical compression (extension) springs made of special steels and alloy. General specifications
GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications
GOST R 53678-2009: Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Part 2. Cracking-resistant carbon and low-alloy steels and the use of cast irons
GOST R 53679-2009: Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Part 1. General principles for selection of cracking-resistant materials
GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements
GOST R 55019-2012: Pipeline valves. Multiplayer metal bellows. General specifications
GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST R ISO 3183-2009: Steel pipes for pipelines of petroleum and natural gas industries. General specifications
SNiP 42-01-2002: State committee of Russian Federation for construction and residential-utility complex (GOSSTROY OF Russia)
SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes
ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements
ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements
ST TsKBA 013-2007: Pipe fittings. Welding of fittings to the pipeline. Technical requirements
ST TsKBA 014-2004: Pipe fittings. Steel castings. General technical conditions
ST TsKBA 016-2005: Pipe fittings. Heat treatment of parts, billets and welded assemblies from high-alloy steels, corrosion-resistant and high-temperature alloys
ST TsKBA 018-2007: Pipe fittings. Heat treatment of blanks (parts) of titanium and titanium alloys. Typical process
ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements
ST TsKBA 026-2005: Pipe fittings. Heat treatment of blanks from carbon and alloyed structural steels. Typical process
ST TsKBA 027-2006: Pipe fittings. Heat treatment of parts from non-ferrous alloys based on copper and nickel. Typical process
ST TsKBA 030-2006: Pipe fittings. Springs helical cylindrical. General technical conditions
ST TsKBA 045-2009: Pipe fittings. Welding and surfacing of parts made of titanium and titanium alloys. Technical requirements and quality control
ST TsKBA 050-2008: Pipe fittings. Castings from cast iron. Technical requirements
ST TsKBA 051-2008: Pipe fittings. Castings from non-ferrous alloys. Technical requirements
ST TsKBA 052-2008: Pipe fittings. Requirements for materials of fittings used for hydrogen sulfide environments
ST TsKBA 053-2008: Pipe fittings. Surfacing and quality control of weld surfaces. Technical requirements
ST TsKBA 054-2008: Pipe fittings. Construction materials for parts of pipeline valves operating in corrosive environments. Technical requirements
ST TsKBA 060-2008: Pipe fittings. Running threaded pairs. Main dimensions, technical requirements
ST TsKBA 068-2008: Pipe fittings. Shut-off valves with metal-to-metal seal. Technical requirements
ST TsKBA 073-2009: Pipe fittings. Friction units, heel-toe and stem-sleeve. Design and dimensions
ST TsKBA 083-2010: Pipe fittings. Multi-layer bellows of alloy VT1-0. General technical conditions
ST TsKBA 106-2011: Pipe fittings. Oxidation of titanium alloy parts
The Document is Referenced By:
GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications
ST TsKBA 003-2003: Pipe fittings. Enclosures and covers. Rationing static strength
ST TsKBA 004-2003: Pipe fittings. Bolts and studs. Rationing static strength
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.