GOST R ISO/IEC 17025-2006

ГОСТ Р ИСО/МЭК 17025-2006

General requirements for the competence of testing and calibration laboratories

Общие требования к компетентности испытательных и калибровочных лабораторий

Status: Not effective - Canceled. IUS 11-2011

This standard establishes the general requirements for the competence of laboratories in conducting tests and / or calibrations, including sampling, testing and calibration, carried out according to standard methods, non-standard methods and methods developed by the laboratory. This standard applies to all laboratories, regardless of the number of personnel or their types of activities in the field of testing and calibration. This standard is intended for use by laboratories in the development of their own quality management systems, as well as management systems for administrative and technical activities. The standard is not intended to be used as a basis for laboratory certification.

Настоящий стандарт устанавливает общие требования к компетентности лабораторий в проведении испытаний и/или калибровки, включая отбор образцов, испытания и калибровку, проводимые по стандартным методам, нестандартным методам и методам, разработанным лабораторией. Настоящий стандарт распространяется на все лаборатории независимо от численности персонала или видов их деятельности в области испытаний и калибровки. Настоящий стандарт предназначен для применения лабораториями при разработке собственных систем менеджмента качества, а также систем менеджмента административной и технической деятельности. Стандарт не предназначен для использования в качестве основы для сертификации лабораторий

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 32

Approved: Federal Agency for Technical Regulation and Metrology, 12/27/2006

SKU: RUSS73466

Price: $422.92




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 03 Sociology. Services. Organization of firms and their management. Administration. Transport »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 3 Activities of testing laboratories » 3.1 Basic requirements for testing laboratories and their activities »

ISO classifier » 03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT » 03.120 Quality » 03.120.10 Quality Management and Quality Assurance »

National standards » 03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT » 03.120 Quality » 03.120.10 Quality Management and Quality Assurance »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T5 Documentation System » T51 Documentation system that determines indicators of quality, reliability and durability of products »


As a Replacement Of:

GOST R ISO/IEC 17025-2000: General requirements for the competence of testing and calibration laboratories

The Document References:

GOST 12.2.006-87: Safety of the electronic mains-connected and similar devices intended for everyday and similar general-purpose use

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 8.563-96: State system for ensuring the uniformity of measurements. Procedures of measurements

GOST R ISO 19011-2003: Guidelines for quality and/or environmental management systems auditing

GOST R ISO 5725-1-2002: Accuracy (trueness and precision) of measurement methods and results. Part 1. General principles and definitions

GOST R ISO 5725-2-2002: Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method

GOST R ISO 5725-3-2002: Accuracy (trueness and precision) of measurement methods and results. Part 3. Intermediate measures of the precision of a standard measurement method

GOST R ISO 5725-4-2002: Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method

GOST R ISO 5725-6-2002: Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values

GOST R ISO 9000-2001: Quality management systems. Fundamentals and vocabulary

GOST R ISO 9001-2001: Quality management systems. Requirements

Federal Law 184-FZ: About technical regulation

GOST R ISO/IEC 17025-2000: General requirements for the competence of testing and calibration laboratories

The Document is Referenced By:

GOST 33280-2015: Medicine remedies for veterinary use. Vaccine against leptospirosis of animals. Specifications

GOST EN 15085-2-2015: Rail transport. Welding of railway vehicles and their elements. Part 2. Quality requirements and certification of the welding manufacturer

GOST R 50571.16-2007: Low-voltage electrical installations. Part 6. Tests

GOST R 51000.4-2008: General requirements for accreditation of testing laboratories

GOST R 51000.4-96: State system for standardization of the Russian Federation. Accreditation system in the Russian Federation. General requirements for accreditation of testing laboratories

GOST R 51232-98: Drinking water. General requirements for organization and quality control methods

GOST R 52167-2003: Children's playgrounds equipment. Swing's safety of structure and test methods. General requirements

GOST R 52168-2003: Children's playgrounds equipment. Slide's safety of structure and test methods. General requirements

GOST R 52168-2012: Children’s playgrounds equipment and surfacing. Safety of structure and test methods for slides. General requirements

GOST R 52169-2003: Children's playgrounds equipment. Safety of structure and test methods. General requirements

GOST R 52169-2012: Children’s playgrounds equipment and surfacing. Safety of structure and test methods. General requirements

GOST R 52407-2005: Drinking water. Methods of hardness determination

GOST R 52472-2005: Vodkas and special vodkas. Acceptance rules and test methods

GOST R 52473-2005: Ethanol from food raw material. Acceptance rules and test methods

GOST R 52621-2006: Perfumery and cosmetic products. Colorimetric methods for the determination of the mercury, lead, arsenic, cadmium content

GOST R 52708-2007: Water. Method for determination of chemical oxygen demand

GOST R 52730-2007: Drinking water. Methods for determination of 2,4-D

GOST R 52756-2007: Rectified ethanol from food raw material. Determination of volatile nitrogen bases content by method of capillary electrophoresis

GOST R 52769-2007: Water. Methods for determination of colour

GOST R 52833-2007: Microbiology of food and animal feeding stuffs. Polymerase chain reaction (PCR) method for the detection of food-borne pathogens. General requirements and definitions

GOST R 52934-2008: Grain starch-containing raw material for production of ethanol. Methods for determination of fermented carbohydrates mass fraction

GOST R 52940-2008: Honey. Determination of the relative frequency of pollen

GOST R 52945-2008: Rectified ethanol. Spectral-luminescent method of identification

GOST R 52960-2008: Forensic science laboratories accreditation. Guidance on the application of GOST R ISO/IEC 17025

GOST R 52962-2008: Water. Methods for determination of chromium (VI) and total chromium

GOST R 52963-2008: Water. Methods for determination of alkalinity, and mass concentration of carbonates and hydrocarbonates

GOST R 52964-2008: Drinking water. Methods for determination of sulphate content

GOST R 52991-2008: Water. Methods for determination of total and dissolved organic carbon

GOST R 53009-2008: Environmental control and monitoring systems. General guidelines on creation, adoption and ensuring functioning of the chemical weapons destruction

GOST R 53079.1-2008: Medical laboratory technologies. Quality assurance of clinical laboratory tests. Part 1. Rules for description of methods of clinical laboratory tests

GOST R 53079.2-2008: Medical laboratory technologies. Quality assurance of clinical laboratory tests. Part 2. Guidelines for improvements of quality in clinical-diagnostic laboratory. Typical model

GOST R 53093-2008: Grain and products of its treatment, mixed feeds. Determination of zearalenone content using high-performance liquid chromatography

GOST R 53120-2008: Honey. Method for determination of electrical conductivity

GOST R 53121-2008: Honey. Method for determination of colour

GOST R 53124-2008: Propolis. Antimicrobial activity

GOST R 53125-2008: Honey. Method for determination of optical activity

GOST R 53126-2008: Honey. Refractometric method for determination of water

GOST R 53133.2-2008: Medical laboratory technologies. Quality control of clinical laboratory tests. Part 2. Rules for intra-laboratory quality control of quantitative methods of clinical laboratory tests using control materials

GOST R 53138-2008: Juices and juice products. Identification. Determination of aromatic substances and volatile flavour components by gas chromatographic-mass spectrometric method

GOST R 53193-2008: Alcoholic and non-alcoholic drinks and beverages. Determination of caffeine, ascorbic acid and its salts, preservatives and sweeteners using capillary electrophoresis method

GOST R 53214-2008: Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. General requirements and definitions

GOST R 53218-2008: Organic fertilizers. Atomic-absorption method for determination of heavy metals content

GOST R 53244-2008: Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. Quantitative nucleic acid based methods

GOST R 53333-2008: Electric energy. Electromagnetic compatibility of technical equipment. Electric energy quality control in the public power supply systems

GOST R 53375-2009: Oil and gas wells. Geological-technological logging. General requirements

GOST R 53398-2009: Organic fertilizers. Methods for determination of specific activity of anthropogenic radioactive nuclei

GOST R 53407-2009: Wax raw material. Specifications

GOST R 53408-2009: Bee bread. Specifications

GOST R 53419-2009: Raw ethanol from food raw material. Gas-chromatographic method for determination of volatile organic admixtures

GOST R 53485-2009: Textile materials. Test method for toxicity

GOST R 53487-2009: Safety of attractions. Inflatable play equipment. Safety requirements. Test methods

GOST R 53584-2009: Juices and juice products. Identification. Determination of stable oxygen isotopes by mass-spectrometry

GOST R 53585-2009: Juices and juice products. Identification. Determination of stable hydrogen isotopes by mass-spectrometry method

GOST R 53586-2009: Juices and juice products. Identification. Determination of stable carbon isotopes by mass-spectrometry

GOST R 53701-2009: Guidance on the application of GOST R ISO/IEC 17025 for sensory testing laboratories

GOST R 53702-2009: Alarms guarding surface vibration detectors for blocking of structures and safes. General technical requirements and test methods

GOST R 53745-2009: Organic fertilizers. Method for determination of specific effective activity of natural radioactive nuclei

GOST R 53798-2010: Standard guide for laboratory information management systems (LIMS)

GOST R 53877-2010: Honey. Method determination of pH and free acidity

GOST R 53878-2010: Honey. Method for determination of honeydew

GOST R 53883-2010: Honey. Method for determination of sugars

GOST R 53886-2010: Water. Methods of determination of toxicity by survival of marine crustaceans

GOST R 53887-2010: Water. Methods for the determination of cations (ammonium, barium, potassium, calcium, lithium, magnesium, sodium, strontium) content using capillary electrophoresis

GOST R 53888-2010: Sealing devices. Test methods of indicative seals resistance to unauthorized access. General requirements

GOST R 53910-2010: Water. Methods of toxicity determination by growth inhibition of marine unicellular algae Phaeodactylum tricornutum Bohlin and Sceletonema costatum (Greville) Cleve

GOST R 54058-2010: Functional Food. Method for determination of carotenoids

GOST R 54293-2010: Production conditions analysis for product attestation

GOST R 54415-2011: Equipment for skate grounds. Safety of structure and test methods. General requirements

GOST R 54418.21-2011: Renewable power engineering. Wind power engineering. Wind turbines. Part 21. Measurement and assessment of power quality characteristics of grid connected wind turbines

GOST R 54455-2011: Alarm systems. Environmental test methods

GOST R 54496-2011: Water. The determination of toxicity with use of green freshwater unicellular algae

GOST R 54499-2011: Drinking water. Luminescent method for determination of uranium content

GOST R 54503-2011: Water. Method for determination of polychlorinated biphenyls

GOST R 54506-2011: Classification of chemicals hazardous due to their physical and chemical properties. Test method for ignition in a confined space

GOST R 54534-2011: Resources saving. Sewage sludge. Requirements for recultivation of disturbed lands

GOST R 54535-2011: Resources saving. Sewage sludge. Requirements for waste dispose and use at landfills

GOST R 54567-2011: Petroleum. Requirements for chemical products ensuring their safe application in petroleum industry

GOST R 54634-2011: Functional food products. Method of vitamin E determination

GOST R 54635-2011: Functional food products. Method of vitamin А determination

GOST R 54637-2011: Functional food products. Method of vitamin D3 determination

GOST R 54639-2011: Foodstuffs and animal feeding stuffs. Determination of mercury by Zeeman atomic absorption spectrometry

GOST R 54773-2011: Anchor supports. Test methods for anchor

GOST R 54807-2011: Vacuum technology. Standard methods for measuring vacuum-pump performance

GOST R 54847-2011: Children’s playgrounds equipment and surfacing. Сableway’s safety of structure and test methods. General requirements

GOST R 54887-2011: Guidelines to diligent practice for control tests of production (for test laboratories and test centres)

GOST R 54888-2011: Guidelines on diligent practice for consumers rights protection organizations

GOST R 55171-2012: Stationary steam and hot-water boilers and heat recovery steam generators. Weld joints. Quality control. General requirements

GOST R 55368-2012: Conformity assessment. Guidance on a third-party certification system for products

GOST R 56140-2014: Medicine biological remedies for veterinary use. Polymerase chain reaction for the Mycoplasma DNA detection

GOST R 57272.6-2016: Risk management of new technologieusing. Part 6. Interrelation of risk with uncertainty of measurements

GOST R 57686-2017: Ceramic composites. Determination of misalignment of grips of a testing machine

GOST R 58139-2018: Quality management systems. Requirements for automotive organizations

GOST R 8.563-96: State system for ensuring the uniformity of measurements. Procedures of measurements

GOST R 8.566-2012: The state system for assuring the traceability of measurements. The blackbody radiators. Standard procedure for verification and calibration

GOST R 8.632-2007: State system of ensuring the uniformity of measurements. Metrological ensuring of the chemical weapons destruction. Main principles

GOST R 8.645-2008: State system for ensuring the uniformity of measurements. Metrological support of geological study, use and protection of natural underground resources of the Russian Federation. General provisions

GOST R 8.654-2009: State system for ensuring the uniformity of measurements. Requirements for software of measuring instruments. Main principles

GOST R 8.690-2009: State system for ensuring the uniformity of measurements. Use of Proficiency Testing by interlaboratory comparisons for Accreditation in Testing

GOST R 8.692-2009: State system for ensuring the uniformity of measurements. Requirements for the competence of providers of proficiency testing for test laboratories by interlaboratory comparisons

GOST R 8.703-2010: State system for ensuring the uniformity of measurements. Nuclear material control and accounting. Measurement system. Main principles

GOST R 8.814-2013: State system for ensuring the uniformity of measurements. The cells for the reference points of the temperature scale. Standard procedure for verification and calibration

GOST R 9.317-2010: Unified system of corrosion and ageing protection. Metallic coatings. Methods of measurement of ductility

GOST R 9.413-2007: Unified system of corrosion and ageing protection. Paint coatings. Penetrability determination of water-thinned paints at electrodeposition

GOST R 9.901.3-2007: Unified system of corrosion and ageing protection. Metals and alloys. General requirements for U-bend specimens of stress corrosion testing

GOST R 9.905-2007: Unified system of corrosion and ageing protection. Corrosion test methods. General requirements

GOST R 9.915-2010: Unified system of corrosion and ageing protection. Metals, alloys, coatings, products. Test methods of hydrogen embrittlement

GOST R EN 1177-2006: Impact absorbing playground surfacing. Safety requirements and test methods

GOST R EN 13528-1-2010: Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Part 1. General requirements

GOST R EN 13804-2010: Foodstuffs. Determination of trace elements. Performance criteria, general considerations and sample preparation

GOST R ISO 10012-2008: Enterprise management. Measurement management systems. Requirements for measurement processes and measuring equipment

GOST R ISO 11140-1-2009: Sterilization of health care products. Chemical indicators. Part 1. General requirements

GOST R ISO 13528-2010: Statistical methods. Using in proficiency testing by interlaboratory comparison tests

GOST R ISO 15189-2006: Medical laboratories. Particular requirements for quality and competence

GOST R ISO 15189-2009: Medical laboratories. Particular requirements for quality and competence

GOST R ISO 15195-2006: Laboratory medicine. Requirements for reference measurement laboratories

GOST R ISO 16000-10-2009: Indoor air. Part 10. Determination of the emission of volatile organic compounds from building products and furnishing. Emission test cell method

GOST R ISO 16000-1-2007: Indoor air. Part 1. Sampling. General

GOST R ISO 16000-3-2007: Indoor air. Part 3. Determination of formaldehyde and other carbonyl compounds. Active sampling method

GOST R ISO 16000-4-2007: Indoor air. Part 4. Determination of formaldehyde. Diffusive sampling method

GOST R ISO 16000-6-2007: Indoor air. Part 6. Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS/FID

GOST R ISO 16000-7-2011: Indoor air. Part 7. Sampling strategy for determination of airborne asbestos fibre concentrations

GOST R ISO 16000-9-2009: Indoor air. Part 9. Determination of the emission of volatile organic compounds from building products and furnishing. Emission test chamber method

GOST R ISO 16200-1-2007: Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography. Part 1. Pumped sampling method

GOST R ISO 16200-2-2007: Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography. Part 2. Diffusive sampling method

GOST R ISO 16889-2011: Hydraulic fluid power. Filters. Multi-pass method of transmission of fluid through the filter element for evaluating filtration performance

GOST R ISO 17078-3-2013: Petroleum and natural gas industries. Drilling and production equipment. Part 3. Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels. General technical requirements

GOST R ISO 22309-2015: State system for insuring the uniformity of measurements. Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above

GOST R ISO 3452-2-2009: Non-destructive testing. Penetrant testing. Part 2. Testing of penetrant materials

GOST R ISO 5725-1-2002: Accuracy (trueness and precision) of measurement methods and results. Part 1. General principles and definitions

GOST R ISO 5725-2-2002: Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method

GOST R ISO 5725-3-2002: Accuracy (trueness and precision) of measurement methods and results. Part 3. Intermediate measures of the precision of a standard measurement method

GOST R ISO 5725-4-2002: Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method

GOST R ISO 5725-5-2002: Accuracy (trueness and precision) of measurement methods and results. Part 5. Alternative methods for the determination of the precision of a standard measurement method

GOST R ISO 5725-6-2002: Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values

GOST R ISO 6142-2008: Gas analysis. Preparation of calibration gas mixtures. Gravimetric method

GOST R ISO 9241-307-2012: Ergonomics of human-system interaction. Part 307. Analysis and compliance test methods for electronic visual displays

I 101-06: System of accreditation of laboratories conducting sanitary and epidemiological research, testing. Guidelines. General accreditation procedure

I 603-06: Quality Management System. Typical content of acts of work of certification commissions

I 604-07: Quality Management System. Typical content of the inspection report

MI 2304-08: GSOEI. Metrological supervision carried out by the metrological services of legal entities. Main provisions

MI 2837-2003: Oil hand-over and acceptance points metrological and technical support

MI 2955-2010: Recommendation. State system for ensuring uniformity of measurements. Typical methods of certification of software measuring devices

MI 3269-2010: Recommendation. State system for ensuring uniformity of measurements. Construction, presentation, design and content of documents on methods (methods) of measurement

MI 3301-2010: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Acceptance points of petroleum products. Metrological and technical support

MR 1.2.0022-11: Sampling procedure for nanomaterials control

MR 1.2.0043-11: Control of nanomaterials in the environment

MR 1.2.0044-11: The procedure for identifying and identifying fullerene C60 aggregates in animal and plant tissue sections by analytical electron microscopy

MR 1.2.0047-11: Electron microscopy detection of structural changes caused by artificial nanoparticles in animal and plant cells

MR 1.2.0048-11: The procedure and methods for determining the organotropic and toxicokinetic parameters of artificial nanomaterials in tests on laboratory animals

MR 1.2.0052-11: Evaluation of the Impact of Nanomaterials on Immunity Function

MR 1.2.0053-11: Evaluation of the effects of nanomaterials on the proteomic profile and biosynthetic processes in tests on laboratory animals

MR 1.2.0054-11: The procedure and methods for evaluating the effects of artificial nanoparticles and nanomaterials on the toxic effects of chemicals

MR 18.1.04-2005: Guidelines. The system of quality control of the analysis of environmental samples.

MU 1.2.2741-10: Sampling procedure for the identification and identification of nanomaterials in laboratory animals

MU 1.2.2745-10: Sampling procedure for characterizing the action of nanomaterials on laboratory animals

MU 1.2.2869-11: The procedure for assessing the toxic effects of nanomaterials on laboratory animals

MU 1.2.2876-11: The procedure for the identification and identification of nanomaterials in plants

MU 1.2.2968-11: The order of biological assessment of the effects of nanomaterials on plants according to morphological features. Methodical instructions

MU 2.2.5.2810-10: Laboratory monitoring of harmful substances in air of working zone of enterprises of main industry sectors

MUK 4.1.003-13: Measurement of mass concentration of 1, 1-dimethylhydrazine in the blood by spectrophotometric method

MUK 4.1.004-13: Method for measuring the mass concentration of ammonium perchlorate (perchlorate ion) in the urine by the potentiometric method

MUK 4.1.015-11: Methods of measuring the mass fraction of tetramethyltetrazene in soil samples by the photometric method

MUK 4.1.016-11: Methods of measuring the mass fraction of nitrosodimethylamine in soil samples by the photometric method

MUK 4.1.018-11: Methods for measuring the mass concentration of dimethylamine in the air of the working area by the photometric method

MUK 4.1.019-11: Measurement method of the mass fraction of 1, 1-dimethylhydrazine in soil samples by photometric method

MUK 4.1.036-17: Methods of measuring the mass concentration of epichlorohydrin in the air of the working area by the photometric method

MUK 4.1.3056-13: Measurement of mass concentrations of vinyl chloride and 1, 2-dichloroethane in blood samples by gas chromatographic analysis of an equilibrium vapor

MUK 4.1.3057-13: Measurement of the mass concentration of chloroethanol in blood samples by capillary gas chromatography

MUK 4.1.3058-13: Measurement of the mass concentration of fluoride in the air of the working area by the photometric method

MUK 4.1.3230-14: Measurement of mass concentrations of chemical elements in biological media (blood, urine) using mass spectrometry with inductively coupled plasma

MUK 4.1.3231-14: Measurement of mass concentrations of N-nitrosoamines (N-nitrosodimethylamine, N-nitrosodiethylamine) in urine using capillary gas chromatography

MUK 4.1.3232-14: Measurement of the mass concentration of acrolein in the urine by high performance liquid chromatography

MUK 4.1.3233-14: Measurement of mass concentrations of 2, 4-dichlorophenol and 2, 4, 6-trichlorophenol in the blood by capillary gas chromatography

MUK 4.3.2812-10: Instrumental control and evaluation of lighting of workplaces

ODM 218.3.070-2016: Guidelines on formulation of self-compacting concrete with prescribed waterproof properties for bored piles

PND F 12.16.1-10: Methodical recommendations. Determination of temperature, odor, color (color) and transparency in wastewater, including treated wastewater, stormwater and melted snow.

PND F 13.1.65-08: Quantitative chemical analysis of atmospheric air and air emissions. Methods for measuring the total content of polychlorinated dibenzo-p-dioxins and dibenzofurans in terms of 2, 3, 7, 8-tetrachlorodibenzo-p-dioxin in samples of industrial emissions into the atmosphere by chromato-mass spectrometry

PND F 13.1.66-09: Methods for measuring the mass concentration of elements (zinc, copper, nickel, manganese, lead, cadmium, chromium, iron, aluminum, titanium, cobalt, calcium, magnesium) in industrial emissions using inductively coupled plasma atomic emission spectrometry

PND F 13.1:2:3.71-11: Methods of measuring mass concentrations of polluting components (metals) in the air of the working area, atmospheric air, industrial emissions into the atmosphere by inductively coupled plasma atomic emission spectrometry (E-232-2010)

PND F 13.2.3.67-09: Methods for measuring the mass concentration of elements (zinc, copper, nickel, manganese, lead, cadmium, chromium, iron, aluminum, titanium, cobalt) in the atmospheric air of populated areas, air at sanitary inductively coupled plasma emission spectromet

PND F 13.3.64-08: Quantitative chemical analysis of atmospheric air and air emissions. Methods for measuring the total content of polychlorinated dibenzo-p-dioxins and dibenzofurans in terms of 2, 3, 7, 8-tetrachlorodibenzo-p-dioxin in atmospheric air samples using chromatography-mass spectrometry

PND F 14.1:2:4.177-02: Quantitative chemical analysis of water. Methods for measuring the mass concentration of phenol in drinking, natural and waste water samples by gas-liquid chromatography

PND F 14.1:2:4.251-08: Quantitative chemical analysis of water. Methods for measuring the total content of polychlorinated dibenzo-p-dioxins and dibenzofurans in terms of 2,3,7,8-tetrachlorodibenzo-p-dioxin in samples of drinking, surface natural and treated waste water using chromatography-mass spectrometry

PND F 16.1:2:2.2.56-08: Quantitative chemical analysis of soil. Methods for measuring the total content of polychlorinated dibenzo-p-dioxins and dibenzofurans in terms of 2, 3, 7, 8-tetrachlorodibenzo-p-dioxin in soil, soil, bottom sediment samples using chromatography-mass spectrometry

PND F 16.1:3.72-2012: Methods of measuring the mass fraction of nitrate ions in soil samples, waste from water treatment, wastewater treatment and water use by the potentiometric method

PND F T 14.1:2:3:4.10-2004: Toxicological methods of analysis. Methods for determining the toxicity of drinking, natural and waste waters, water extracts from the soil, sewage sludge and production and consumption waste by changing the optical density of the chlorella algae culture

R 50.2.060-2008: State system for ensuring uniformity of measurements. The introduction of standardized methods of quantitative chemical analysis in the laboratory. Confirmation of compliance with the established requirements

R 50.2.061-2008: General criteria for the competence of certified reference material producers

R 50.2.067-2009: State system for ensuring the uniformity of measurements. Evaluation of reference data on physical constants and materials properties. Basic statements

R RSK 003-07: Procedure for the confirmation of conformity of metrological services of legal bodies accredited in the Russian calibration system to the requirements of GOST R ISO/IEC 17025-2006 'General requirements for the competence of testing and calibration laborat

RD 03-21-2007: Regulations on unified system of conformity assessment on installations under the control of the federal service for ecological, technological and nuclear supervision

RD 52.10.728-2010: Basic requirements for the competence of laboratories in monitoring the status and pollution of sea water. State Oceanographic Institute (GOIN)

RD 52.10.777-2012: Internal quality control of information on the state and pollution of the marine environment

RD 52.24.509-2005: Internal hydro-chemical information quality control

RD RSK 02-2014: The order of the organization of the Russian calibration system

RDT 06-2011: General requirements for the competence of laboratories (centers) performing measurements for the purpose of monitoring the environment and its pollution

RMD 31-04-2008 Sankt-Peterburg: Recommendations for construction of residential and public high-rise buildings

RMD 41-11-2012 Sankt-Peterburg: DESIGNING AND INSTALLATION OF HEAT SUPPLY SYSTEM IN SAINT-PETERSBURG

RMG 103-2010: State system for ensuring the uniformity of measurements. Proficiency testing of test (measurement) laboratories, conducting the tests of substances, materials and environmental objects (for composition and physico-chemical properties) by means of interla

RMG 76-2004: State system for ensuring the uniformity of measurements. Internal control of quantitative chemical analysis result's accuracy

RMG 89-2010: State system for ensuring the uniformity of measurements. Acceptance point of oil. Metrological and technical assurance

SDA 01-2008: General requirements for accreditation of conformity assessment bodies

SDA 01-2009: General requirements for accreditation of conformity assessment bodies

SDA 03-2008: Requirements for accreditation experts

SDA 03-2009: Requirements for accreditation experts

SDA 06-2008: Terms and definitions used in the unified conformity assessment system at facilities controlled by the Federal Service for Environmental, Technological and Nuclear Supervision

SDA 15: Requirements to testings laboratories

SDA 15-2009: Requirements to testings laboratories

SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel

SDA 24-2009: Rules for assessment (certification) of testing laboratories personnel

SDA 34-2008: Requirements for testing laboratories of the energy safety subsystem

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures

FR 1.31.2007.03794: Methodical recommendations on the application of the method of performing pH measurements in waters by the potentiometric method

GOST R 58423-2019: Gas pressure regulators for inlet pressure not higher than 10 MPa

GOST R 58543-2019: Integrated Management Systems. Guidelines for small and medium-sized enterprises to assess the competence of experts in integrated management systems

GOST R 58600-2019: Additive technology. Non-destructive testing of metal products manufactured by additive technology. Key Points

GOST R IEC 62209-1-2008: Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices. Human models, instrumentation and procedures. Part 1. Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)

GOST R ISO/IEC 17007-2011: Conformity assessment. Guidance for drafting normative documents suitable for conformity assessment

GOST R ISO/IEC 17020-2010: General criteria for the operation of various types of bodies performing inspection

GOST R ISO/IEC 17065-2012: Conformity assessment. Requirements for bodies certifying products, processes and services

M 15-2010: Recommendation. General requirements for quantitative chemical analysis

M-MVI 80-2008: Methods for measuring the mass fraction of elements in soil samples, soils and bottom sediments by atomic emission and atomic absorption spectrometry

Order 2374: About the procedure for consideration and passage of documents upon accreditation at the Federal Agency for Technical Regulation and Metrology in the field of confirmation of conformity and in the field of ensuring the uniformity of measurements

Order 4080: About the procedure for consideration and passage of documents upon accreditation at the Federal Agency for Technical Regulation and Metrology

SDA-06-2009: Terms and definitions used in the Unified system of conformity assessment in the field of industrial, environmental safety, safety in the energy sector and construction

SDA-21-2010: Product Certification Rules

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Security of Financial (banking) Operations. Information Protection of Financial Organizations. Basic Set of Organizational and Technical Measures
Language: English
Price: $843.90
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Construction in seismic regions of Ukraine
Language: English
Price: $5,909.85
Aviation turbine fuels and kerosine. Determination of smoke point
Language: English
Price: $270.63
Distillate fuels. Determination of free water and particulate contamination by visual inspection method
Language: English
Price: $165.87
Aviation gas turbine fuels. Method for determining thermal oxidative stability
Language: English
Price: $473.36
Hazard classification of chemical products. General requirements
Language: English
Price: $356.40
Warning labeling of chemical products. General requirements
Language: English
Price: $613.80
Safety data sheet for chemical products. General requirements
Language: English
Price: $121.77
Hoisting cranes. Rules and test methods
Language: English
Price: $393.39
Aviation turbine fuels. Determination of lubricity by the ball-on-cylinder lubricity evaluator (BOCLE)
Language: English
Price: $309.43
Aviation turbine fuel. Determination of acidity
Language: English
Price: $218.25
Petroleum products. Determination of color by Saybolt chromometer
Language: English
Price: $218.25
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Aviation fuels. Calculating net calorific value
Language: English
Price: $179.45

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!