GOST 32586-2013
ГОСТ 32586-2013
|
|
Vibroinsulators rubber and rubber-reinforced for automotive technic. Specifications
Виброизоляторы резиновые и резиноармированные для автотракторной техники. Технические условия
Status: Effective - Introduced for the first time. IUS 9-2014
This standard applies to rubber and rubber reinforced vibration isolators for automotive engineering, including pillows, supports, buffers and other products (hereinafter referred to as vibration isolators) made by the shaped and non-shaped methods and intended for picking cars, buses, motorcycles, tractors, agricultural, construction and road machines, as well as vibration centrifuges and other machines, operated depending on the brands of rubber used at temperatures from minus 60 ° C to plus 130 ° C. When using vibration insulators in other operating conditions, the consumer draws up the application authorization protocol in accordance with GOST 2.124. The standard does not apply to vibration isolators for VAZ cars
Настоящий стандарт распространяется на резиновые и резиноармированные виброизоляторы для автотракторной техники, в том числе подушки, опоры, буферы и другие изделия (далее - виброизоляторы), изготовленные формовым и неформовым способами и предназначенные для комплектования автомобилей, автобусов, мотоциклов, тракторов, сельскохозяйственных, строительных и дорожных машин, а также вибрационных центрифуг и других машин, эксплуатирующихся в зависимости от марок применяемых резин при температуре от минус 60 °C до плюс 130 °С. При применении виброизоляторов в других условиях эксплуатации потребитель оформляет протокол разрешения применения по ГОСТ 2.124. Стандарт не распространяется на виброизоляторы для автомобилей ВАЗа
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/22/2013
SKU: RUSS73516
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.10 Testing and monitoring products of rubber and plastics industry »
4.10.1 Rubber products »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.50 Seals »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.50 Seals »
The Document References:
GOST 10354-82: Polyethylene film Specifications
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10541-78: Automobile motor oils for carburetor engines
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12301-2006: Cartons of paperboard, paper and composite materials. General specifications
GOST 13344-79: Waterproof abrasive cloth. Specifications
GOST 13808-79: Rubber. Method for the determination of low temperature resistance according to elastic rebound after compression
GOST 14192-96: Cargo marking
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15152-69: Unified system of corrosion and ageing protection. Industrial rubber products for tropics. General requirements
GOST 15623-84: Wooden cases for tools and accessories. Specifications
GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage
GOST 16511-86: Wooden boxes for electrical equipment. Specifications
GOST 16536-90: Wooden boxes for automotive industry products
GOST 166-89: Vernier callipers. Specifications
GOST 18477-79: Universal containers
GOST 2.124-85: Sequence of application of purchased products
GOST 20403-75: Rubber. Method for determination hardness in international units (30 to 100 IRHD)
GOST 209-75: Rubber and glue. Methods of determination of metal bond strength at tearing
GOST 24297-87: Input inspection of products. General provisions.
GOST 262-93: Rubber, vulcanized. Determination of tear strength (throuser, angle and crescent test pieces)
GOST 263-75: Rubber. Method for the determination of Shore A hardness
GOST 270-75: Rubber. Method of the determination elastic and tensile stress-strain properties
GOST 28840-90: Machines for tension, compression and bending tests of materials
GOST 344-85: Emery paper for testing the wearability of rubber
GOST 380-2005: Common quality carbon steel. Grades
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications
GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications
GOST 6267-74: Grease ЦИАТИМ-201. Specifications
GOST 6794-75: Oil АМГ-10. Specifications
GOST 7912-74: Rubber. The method for the determination of brittle temperature
GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
GOST 8448-78: Coal and shale benzene. Specifications
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.024-74: Unified system of corrosion and ageing protection. Rubbers. Methods of heat ageing stability determination
GOST 9.029-74: Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing of resistance to ageing under static deformation of compression
GOST 9.030-74: Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing resistance to attack by corrosive media in limp state
GOST 9569-2006: Paraffined paper. Specifications
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
NPB 105-03: Determination of categories of rooms, buildings and external installations on explosion and fire hazard
PPB 01-03: On Approval Of Fire Safety Standards In The Russian Federation
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
