GOST R 50779.71-99
ГОСТ Р 50779.71-99
|
|
Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
Статистические методы. Процедуры выборочного контроля по альтернативному признаку. Часть 1. Планы выборочного контроля последовательных партий на основе приемлемого уровня качества AQL
Status: Not effective - Superseded
This standard establishes alternative control sampling plans for piece products based on an acceptable quality level (AQL)
Настоящий стандарт устанавливает планы выборочного контроля по альтернативному признаку для штучной продукции на основе приемлемого уровня качества (AQL)
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
12/23/1999
SKU: RUSS73529
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
03 Sociology. Services. Organization of firms and their management. Administration. Transport »
PromExpert »
SECTION I. TECHNICAL REGULATION »
III Quality »
2 Product quality assurance »
2.3 Quality Management »
2.3.2 Statistical methods of quality management »
ISO classifier »
03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT »
03.120 Quality »
03.120.30 Application of statistical methods »
National standards »
03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT »
03.120 Quality »
03.120.30 Application of statistical methods »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T59 General methods and means of control and testing of products. Methods of statistical control of quality, reliability, durability »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Applied statistics. Methods for statistical control of quality, reliability, durability. General methods of control and testing of products »
The Document is Replaced With:
GOST R ISO 2859-1-2007: Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling schemes indexed by acceptance quality limit for lot-by-lot inspection
The Document References:
GOST R 50779.11-2000: Statistical methods. Statistical quality control. Terms and definitions
GOST R 50779.72-99: Statistical methods. Sampling procedures for inspection by attributes. Part 2. Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
The Document is Referenced By:
GOST 10025-78: Tin-phosphor bronze rods. Specifications
GOST 10092-2006: Cupro-nickel tubes for heat-exchange apparatus. Specifications
GOST 1066-90: Brass wire
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 10707-80: Steel cold shaped electrically welded tubes technical conditions
GOST 1173-2006: Copper foil, ribbons, sheets and plates. Specifications
GOST 1173-93: Copper strips. Specifications
GOST 12302-83: Bags made of polymeric and composite materials. General specifications
GOST 12391-77: Panel board flexible shafts for vehicle. Specifications
GOST 12670-99: Porcelain dick insulators for contact net of electrified railways. General specifications
GOST 13726-97: Aluminium and aluminium alloys strips. Specifications
GOST 14311-85: Steel cord
GOST 15040-77: Oxygen-free copper pipes
GOST 1535-2006: Copper rods. Specifications
GOST 1535-91: Copper rods. Specifications
GOST 158-74: Knife sections ledger plates and knife backs for cutter bars of agricultural machines. Specifications
GOST 16118-70: Cylindrical helical compression (extension) springs made of round steel. Specifications
GOST 16130-90: Welding wire and rods of copper and copper alloys. Specifications
GOST 1628-78: Bronze rods. Specifications
GOST 17232-99: Aluminium and aluminium alloys plates. Specifications
GOST 1761-92: Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications
GOST 17677-82: Light fixtures
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 17769-83: Fastening details. Rules of acceptance
GOST 19086-80: Throw-away (indexable) carbide inserts. Specifications
GOST 19671-91: Tungsten wire for light sources
GOST 20010-93: Industrial rubber gloves
GOST 20068.1-79: Tintess bronze. Method of spectral analysis of metal standard specimens with spectrum photographic record
GOST 21488-97: Pressed bars of aluminium and aluminium alloys. Specifications
GOST 21552-84: Computers and computer
GOST 2239-79: General purpose
GOST 23350-98: Electronic hand and pocket watches. General specifications
GOST 23616-79: System of ensuring of geometrical accuracy of parameters in construction. Control of accuracy
GOST 23784-98: Low-frequency low voltage and combined connectors. General specifications
GOST 23948-80: Sewing wares. Acceptation rules
GOST 2475-88: Wires and rolls
GOST 25003-81: The plates cutting replaceable many-sided ceramic. Technical conditions
GOST 26272-98: Electronic-mechanical quartz hand and pocket watches. General specifications
GOST 26891-86: Aerosol valves, spray heads and caps
GOST 27266-87: Molybdenum wire for light sources
GOST 28498-90: Liquid-in-glass thermometers
GOST 28631-2005: Bags, cases, brief-cases, satchels, paper-cases, small leather goods. General specifications
GOST 28896-91: Fixed capacitors for use in electronic equipment. Part 1. General specifications
GOST 28897-91: Fixed capacitors for use in electronic equipment. Part 11. Sectional specification. Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors
GOST 28982-91: Pens for fountain pens. Specification
GOST 29285-92: Reducers and motor-reducers. General requirements to the methods of experiments
GOST 295-98: Aluminium for deoxidation, manufacture of ferroalloys and aluminothermy. Specifications
GOST 30177-94: Textile glass, carbon and asbestos. Acceptance sampling plans
GOST 302-79: Medical maximum glass thermometer. Specifications
GOST 30407-96: Glass tableware and decorative articles
GOST 30531-97: Porcelain and glass pin type insulators for voltage level up to 1000 V. General specifications
GOST 30765-2001: Metal transport packagings. General specifications
GOST 30766-2001: Tins for chemical products. General specifications
GOST 30808-2002: Spectacles lenses. General specifications
GOST 30832-2002: Automatic identification. Bar coding. Bar code linear symbols. Print quality test specifications
GOST 31227-2004: Food 5,5-aqueous tri-sodium citrate. Specifications
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
GOST 3303-94: Rabber hot-water bottles. Specifications
GOST 379-95: Silicate brick and stones. Specifications
GOST 4598-86: Fibre boards. Specifications
GOST 474-90: Acid-proof brick. Specifications
GOST 475-78: Wooden doors. General specifications
GOST 4828-83: Liqueur-vodka products. Acceptance rules and test methods
GOST 490-2006: Lactic acid for use in foodstuffs. Specifications
GOST 494-90: Pipes of brass
GOST 5187-2003: Nickel silver, german silver and monel tapes. Specifications
GOST 520-2002: Rolling bearings. General specifications
GOST 5541-2002: Cork means of closing. General specifications
GOST 617-2006: General-purpose copper and brass tubes of round section. Specifications
GOST 617-90: Copper tubes. Specifications
GOST 6402-70: Lock washers. Specifications
GOST 6490-93: Suspended line disk insulators
GOST 7152-85: Inset microphones and headphones for conventional telephones
GOST 7372-79: Steel wire for ropes
GOST 767-91: Copper anodes. Specifications
GOST 8.250-77: State system for ensuring the uniformity of measurements. Thermometers glass medical maximum. Verification methods and means
GOST 8179-98: Refractory products. Sampling and acceptance testing
GOST 849-97: Primary nickel. Specifications
GOST 8608-96: Porcelain pin support insulators for voltage above 1000 V. General specifications
GOST 8799-90: Starters for tubular fluorescent lamps
GOST 908-2004: Citric acid monohydrate for use in foodstuffs. Specifications
GOST 9173-86: Knitted goods. Acceptance rules
GOST R 50030.4.1-2002: Low-voltage switchgear and controlgear. Part 4-1. Contactors and motor-starters. Electromechanical contactors and motor-starters
GOST R 50339.0-2003: Low-voltage fuses. Part 1. General requirements
GOST R 50779.30-95: Statistical methods. Acceptance sampling. General requirements
GOST R 50779.45-2002: Statistical methods. Cumulative sum control charts. General aspects
GOST R 50779.52-95: Statistical methods. Acceptance sampling by attributes
GOST R 50779.70-99: Statistical methods. Sampling procedures for inspection by attributes. Part 0. Introduction to the ISO 2859 attribute sampling system using an acceptable quality level (AQL)
GOST R 50779.72-99: Statistical methods. Sampling procedures for inspection by attributes. Part 2. Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
GOST R 50779.73-99: Statistical methods. Sampling procedures for inspection by attributes. Part 3. Skip-lot sampling procedures
GOST R 50779.74-99: Statistical methods. Sampling procedures and charts for inspection by variables for percent nonconforming
GOST R 50779.75-99: Statistical methods. Sequential sampling plans for inspection by attributes
GOST R 50779.76-99: Statistical methods. Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
GOST R 51289-99: Returnable polymeric boxes. General specifications
GOST R 51322.1-2011: Plugs and socket-outlets for household and similar purposes. Part 1. General requirements and methods of tests
GOST R 51324.1-2005: Switches for household and similar fixed electrical installations. General requirements and tests methods
GOST R 51507-99: Post cards. Technical requirements. Control methods
GOST R 51574-2000: Food common salt. Specifications
GOST R 51627-2000: Lighters. Safety specifications. Methods of testing
GOST R 51687-2000: Stainless steel table and kitchen cutlery. General specifications
GOST R 51740-2001: Specifications for food products. General requirements for development and lay out
GOST R 51756-2001: Aluminium cans of deep drawing with easy open end. Specifications
GOST R 51760-2001: Polymeric consumers packagings. General specifications
GOST R 51909-2002: Environment stability test methods for machines, instruments and other industrial products. Tests for transportation and storage
GOST R 51958-2002: Polymeric means of closing. General specifications
GOST R 51968-2002: Domestic vacuum flasks with glass fills. General specifications
GOST R 51969-2002: Kitchen utensils from special domestic glass. General specifications
GOST R 52078-2003: Wood particle boards, laminated with paper impregnated with thermosetting resins
GOST R 52083-2003: Vented nickel-iron prismatic rechargeable single cells. General specifications
GOST R 52230-2004: Electrical equipment for vehicles and tractors. General specifications
GOST R 52273-2004: Leakage electric current mine-type protective devices for voltage nets to 1200 V. General technical requirements
GOST R 52484-2005: Souvenir matches. General specifications
GOST R 52579-2006: Consumers package from combined materials. General specifications
GOST R 52620-2006: Transport polymeric containers. General specifications
GOST R 55738-2013: Studs and ceramic ferrules for stud welding
GOST R IEC 60285-2002: Alkaline secondary cells and batteries. Sealed nickel-cadmium cylindrical single cells
GOST R IEC 60384-14-1-2004: Fixed capacitors for use in electronic equipment. Part 14-1. Blank detail specification on fixed capacitors for electromagnetic interference suppression and connection to the supply mains. Assessment level D
GOST R IEC 60509-2002: Alkaline secondary cells and batteries. Sealed nickel-cadmium button rechargeable single cells
GOST R IEC 60622-2002: Alkaline secondary cells and batteries. Sealed nickel-cadmium prismatic rechargeable single cells
GOST R IEC 60623-2002: Batteries and alkaline batteries. Nickel-cadmium open prismatic batteries
GOST R IEC 60623-2008: Secondary cells and batteries containing alkaline or other non-acid electrolytes. Vented nickel-cadmium prismatic rechargeable single cells
GOST R IEC 60950-2002: Safety of information technology equipment
GOST R IEC 61037-2001: Electricity metering. Tariff and load control. Particular requirements for electronic ripple control receivers
GOST R IEC 61038-2001: Electricity metering. Tariff and load control. Particular requirements for time switches
GOST R ISO 11607-2003: Packaging for terminally sterilized medical devices. General requirements
GOST R ISO 2859-4-2006: Statistical methods. Sampling procedures for inspection by attributes. Part 4. Assessment of declared quality level
GOST R ISO/IEC 15419-2005: Automatic identification. Bar coding. Bar code digital imaging and printing systems. General and performance requirements
GOST R ISO/IEC 15423-2005: Automatic identification. Bar coding. General requirements for bar code scanner and decoder performance testing
GOST R ISO/IEC 15426-1-2002: Automatic identification. Bar coding. Linear bar code symbols verifier. Conformity requirements
MI 2335-2003: State system for ensuring uniformity of measurements. Internal quality control of quantitative chemical analysis results
P SSFZhT 45/ISO 9001-2003: The certification system on the federal railway transport of the Russian Federation. Quality Management System. Requirements
R 50.1.059-2006: Statistical methods. Guidelines for the selection of statistical methods in standardization and specification
R 50-609-40-01: Recommendations. Technological design technical control
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 1. Television
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 2. Broadcasting
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 3. General safety requirements
STB GOST R 51756-2002: Aluminum banks of deep drawing with easy-to-open lids. Specifications
TU 5913-001-58455567-2004: Low-Emission Glass with Soft Coating
|
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
