GOST 9.303-84
ГОСТ 9.303-84
|
|
Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection
Единая система защиты от коррозии и старения. Покрытия металлические и неметаллические неорганические. Общие требования к выбору
Status: Valid - Supersedes
The standard establishes the general requirements for the selection of metallic and non-metallic inorganic coatings of parts and assembly units applied by chemical, electrochemical, and hot (tin and its alloys) methods. The standard does not apply to coatings used as technological coatings for parts of watches and jewelry, with the exception of the requirements for determining the maximum thickness of the coating.
Стандарт устанавливает общие требования к выбору металлических и неметаллических неорганических покрытий деталей и сборочных единиц, наносимых химическим, электрохимическим и горячим (олово и его сплавы) способами. Стандарт на распространяется на покрытия, применяемые в качестве технологических, покрытия деталей часов и ювелирных изделий, за исключением требований по установлению максимальной толщины покрытия.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
3/15/1984
SKU: RUSS73557
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
25 Mechanical Engineering »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Welding materials »
Welding regulations »
Admission Testing »
Welding regulations »
Documentation »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Soldering »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Main materials »
Non-ferrous metals »
Welding regulations »
Main materials »
Polymers »
Welding regulations »
Welding materials »
Solders »
Welding regulations »
Welding materials »
Fluxes »
Standards for pipe fittings (TPA) »
10. Production »
10.7 Coatings »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.2 Testing of manufacturing products »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.220 Surface treatment and coating »
National standards »
25 MECHANICAL ENGINEERING »
25.220 Surface treatment and coating »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.220 Surface treatment and coating »
25.220.01 Surface treatment and coating in general »
National standards »
25 MECHANICAL ENGINEERING »
25.220 Surface treatment and coating »
25.220.01 Surface treatment and coating in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T9 Unified system of protection against corrosion and aging of materials and products »
T94 Metallic and non-metallic inorganic coatings »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Unified system of protection against corrosion and aging of materials and products (ESZKS) »
As a Replacement Of:
GOST 14007-68: Metal and non-metal coatings (inorganic). Croups of operation conditions
GOST 14623-69: Metal and non-metal inorganic coating. Basic requirements for the choice of coatings
The Document References:
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits
GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits
GOST 25347-82: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits
GOST 9.005-72: Unified system of corrosion and ageing protection. Metals, alloys, metallic and non-metallic coatings. Permissible and impermissible contacts with metals and non-metals
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9.305-84: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Technological process operations for coating production
GOST 9.306-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Symbols
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
The Document is Referenced By:
GOST 10223-82: Batch-weighing dispensers of discrete action, balance and batch-weighing dispensers of continuous action
GOST 10304-80: Rivets
GOST 10393-2014: Compressors, electrically driven compressor sets and compressor units for the railway rolling stock. General specifications
GOST 10403-80: Constructional steel trowels. Technical requirements
GOST 10434-82: Electric contact connections. Classification. General technical requirements
GOST 10494-80: Studs for flanged connections with lens-shaped seals for pn - 10-100 MPa (100-1000 kgf/sq sm). Technical requirements
GOST 10495-80: Hexagon nuts for flange joints for pn above 10 to 100 MPa (above 100 to 1000 kgf/cm2)
GOST 10580-2006: Technological foundry equipment. General specifications
GOST 10580-74: Foundry equipment. General specifications
GOST 10602-94: Hexagon head bolts with thread diameter over 48 mm. Product grade B. Specifications
GOST 10605-94: Hexagon nuts with thread diameter over 48 mm. Product grade B. Specifications
GOST 10607-94: Hexagon thin nuts (chamfered) with thread diameter over 48 mm. Product grade B. Specifications
GOST 10708-82: Pendulum impact machines
GOST 10773-93: Grooved pins-full-length taper grooved. Specifications
GOST 10778-83: Spatulos. Specifications
GOST 10831-87: Paint rolls specification
GOST 11004-84: Principal ventilation mine blowers
GOST 11042-90: Construction steel hammers. Specifications
GOST 11074-93: Hexagonal socket flat-point set screws. Product grades A and B. Specifications
GOST 11075-93: Hexagonal socket dog-point set screws. Product grades A and B. Specifications
GOST 11098-75: Gauge callipers with reading arrangement. Specifications
GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications
GOST 11447-80: Locking studs for Py 10-100 MPa (100-1000 kgf/cm2). Technical requirements
GOST 11476-79: Control cash machines. Specifications
GOST 1147-80: Wood details and articles for one-two storey dwelling and public buildings
GOST 11614-2019: Semi-automatic flush taps. Technical specifications
GOST 11614-94: Semi-automatic flushing valves. Specifications
GOST 11648-75: Quick removable thrust washers. Specifications
GOST 11737-93: Hexagon socket screw keys. Specifications
GOST 11871-88: Slotted round nuts, product grade A. Specifications
GOST 12644-80: Hollow and semi-hollow rivets. Specifications
GOST 12803-76: Steel connections. Specification
GOST 12850.1-93: Grooved pins-full-length parallel grooved with pilot. Specifications
GOST 12850.2-93: Grooved pins-full-length parallel grooved, with chamfer. Specifications
GOST 13781.0-86: Power cable sleeves for voltage of up to 35 kv inclusive
GOST 13815-82: Fire foam sprinklers and drenchers
GOST 13944-86: Retaining spring flat rings and grooves for them. Specifications
GOST 1405-83: Pinch and wrenching steel bars. Specifications
GOST 14084-76: Elastic clutches with sprocket wheel. Design. Basic parameters and dimensions
GOST 14227-85: Dish washing machines
GOST 14227-97: Dish washing machines. General specifications
GOST 1476-93: Cone-point straight slatted set screws. Product grades A and B. Specifications
GOST 1477-93: Flat-point straight slotted set screws. Product grades A and B. Specifications
GOST 1478-93: Dog-point straight slotted set screws. Product grades A and B. Specifications
GOST 1479-93: Cup-point straight slotted set screws. Product grades A and B. Specifications
GOST 14933-83: Air-suction units for household vacuum cleaners
GOST 15035-80: Underground scraper winches
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15151-69: Machines, instuments and other industrial products for tropics. General specifications.
GOST 15594-80: Throw-over type jaw crawler-mounted log loaders
GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications
GOST 15763-91: Pipeline thread connections for Py up to 63 MPa (up to 630 kgf/cm2)
GOST 15850-84: Mine parachutes for cages
GOST 15851-84: Suspension devices for mine cages
GOST 15963-79: Electrical articles for tropical application. General technical requirements and methods of testing
GOST 16016-2014: Clamp bolts for rail track fastenings. Specifications
GOST 16017-2014: Inserted bolts for rail track fastenings. Specifications
GOST 16018-2014: Nuts for clamp and inserted bolts of rail track fastenings. Technical specifications
GOST 16162-85: Standard reducers. General specifications
GOST 16264.0-2018: Electric machines of low power. Engines General specifications
GOST 16264.0-85: Low-power electric motors
GOST 16349-85: Cyclic mixers for building materials
GOST 16371-2014: Furniture. General specifications.
GOST 16371-93: Furniture
GOST 164-90: Vernier height gauges. Specifications
GOST 16561-76: Metal accessories for wood containers. Specifications
GOST 16569-86: Burners for domestic gas heaters
GOST 166-89: Vernier callipers. Specifications
GOST 16854-2016: Armchairs for auditoriums. General technical conditions
GOST 16854-91: Auditorium arm-chairs. General specifications
GOST 16940-89: Sanitary stretchers. General technical requirements and test methods
GOST 17199-88: Fitter’s screwdrivers
GOST 17270-71: Frames for hand hack-saws. Specifications
GOST 17314-81: Devices for fastening thermal insulation of steel vessels and equipment. Design and dimensions. Technical requirements
GOST 17438-72: Pliers
GOST 17439-72: Adjustable pliers
GOST 17440-93: Sniper nose pliers
GOST 1757-76: Hoes. Specification
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 18088-83: Metal-cutting, diamond, wood-cutting and fitter's tools. Packing, marking, transportation fitter and auxiliary
GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications
GOST 18126-94: Bolts and nuts with thread diameter over 48 mm. General specifications
GOST 18680-73: Sealing details. General specifications
GOST 18707-81: Jumpers for protection of rocketry and space-rocketry items from static electricity
GOST 18828-73: Ring single-ended square spanners. Design and dimensions
GOST 18833-73: Lever-gearing measuring heads. Specifications
GOST 18856-81: Apparatuses for inhalation anesthesia and artificial pulmonary ventilation
GOST 18954-73: Gas sampling and storage glass apparatus and tubes (pipettes). Specifications
GOST 18975-86: Knife for finishing works. Specification
GOST 18981-73: Pipe toggle wrenches
GOST 18988-90: Lifts on ships. General technical requirements
GOST 19099-86: Lubricating systems
GOST 19126-2007: Medical metallic instruments. General specifications
GOST 19126-79: Metallic medical instruments
GOST 19147-82: Skiing sticks. Specifications
GOST 19259-73: Cutter for ceramic tiles
GOST 19262-80: Frequency protective relays. General technical requirements
GOST 19263-73: Mains busways up to 1200 V, dc. General technical conditions
GOST 19264-82: Control electromagnets. General specifications
GOST 19535-74: Flange joints for hydraulic and lubricating systems. Specifications
GOST 19569-89: Steam medical sterilizers
GOST 19597-94: Garden rakes
GOST 19598-95: Lawn-and-garden hoes, grub-axes and cultivators
GOST 19681-2016: Sanitary and technical water fittings. General specifications
GOST 19681-94: Sanitary technical water mixing and distributing accessories. General specifications
GOST 19734-80: Input control devices for residential and public buildings
GOST 20062-96: Tractor seat
GOST 20783-81: Metal trays for wiring
GOST 20803-81: Metal boxes designed for electric wiring
GOST 21130-75: Electrical articles. Grounding terminals and grounding signs
GOST 21204-83: Gas burners. Classification. General requirements, marking, and storage
GOST 21424-93: Flexible couplings with rubber-bushed studs. Parameters and dimensions
GOST 21485-2016: Flushing tanks with accessories. General specifications
GOST 21485-94: Flushing tanks with accessories. General specifications
GOST 21519-2003: Windows of aluminium. Specifications
GOST 21519-2022: Window blocks made of aluminum profiles. Technical conditions
GOST 21519-84: Windows, balcony doors, shop-windows and stained glass panels of aluminum alloys
GOST 22046-86: School furniture. General specifications
GOST 22130-2018: Steel piping details. Movable supports and hangers. Specifications
GOST 22130-86: Steel Pipeline Parts
Movable supports and suspensions
Specifications
GOST 22224-83: Hand flat spring dynamometers. Specifications
GOST 22229-83: Ceramic through insulators for voltage over 1000 V. General specifications
GOST 22340-89: Medical electrical water stills
GOST 22502-89: Condensing units with hermetic refrigeration compressors for commercial refrigeration machinery
GOST 22584-88: Rope electric hoists. Specifications
GOST 22584-96: Electric rope hoists
GOST 22649-83: Medical air sterilizers
GOST 22744-84: Flame photometers. General specifications
GOST 23.301-78: Products wear resistance assurance. Instruments for evaluating wear by the method of cut notches. Technical requirements
GOST 23067-78: Electric heating equipment for public catering establishments. General specifications
GOST 23074-85: Fertilizer placers for liquid organic fertilizers
GOST 23106-78: Longitudinal screw cap couplings. Basic parameters. Design and dimensions
GOST 2310-77: Steel bench hammers
GOST 23117-91: Semiautomatic grips for tensioning of the steel in prestressed concrete structures. Specifications
GOST 23166-99: Windows. General specifications
GOST 23173-96: Garden wheel barrows
GOST 23289-2016: Waste water drain sanitary accessories. Specification
GOST 23289-94: Waste water drain sanitary accessories. Specifications
GOST 23411-84: Electronic cash registers
GOST 23469.0-81: Cable sleeves
GOST 23476-79: Tramway and trolleybus overhead trolley wire supporting devices. General specifications
GOST 23484-79: Electrohydraulic-plants for removing of cores. Technical requirements
GOST 23496-89: Medical endoscopes
GOST 2361-74: Limiters for cases flap covers. Specifications
GOST 23707-95: Small tools for tillage
GOST 23747-88: Doors of aluminium alloys. Specifications
GOST 23784-84: Low-frequency voltages up to 1500 V and connectors mated set. General specifications
GOST 23784-98: Low-frequency low voltage and combined connectors. General specifications
GOST 23833-95: Commercial refrigeration equipment
GOST 23981-80: Cable lugs
GOST 23982-85: Fertilizing machinery
GOST 24104-88: General purpose and reference laboratory balances
GOST 24145-80: Domestic containers for bread. General specifications
GOST 24246-80: Box clutches. Basic parameters. Design and dimensions
GOST 24246-96: Box clutches. Parameters, design and dimensions
GOST 24308-2018: Utensils of copper-nickel alloy, german silver and brass with chrome or nickel coating. General specifications
GOST 24308-80: Utensils of copper-nickel alloy, nickel silver and brass with chrome or nickel coating
GOST 24471-80: Standard mine lighting equipment
GOST 24474-80: Marking tools
GOST 24700-99: Windows of wood with glassing units. Specifications
GOST 24752-81: Trolley bus bars of voltage up to 1 000 v
GOST 24788-81: Enameled steel kitchen utensils.
GOST 2491-82: Ow-voltage electromagnetic starters
GOST 25010-81: Howks for plastering. Specifications
GOST 25097-2002: Windows from wood and aluminium. Specifications
GOST 25148-82: Stationary dental units
GOST 25595-83: Stocks for dies and square shank tools. Specifications
GOST 25605-83: Hand operated socket wrenches and drive parts
GOST 25727-83: Letter and digital hand stamps
GOST 25782-90: Derbies, floats, semifloats. Specifications
GOST 25878-2018: Steel molds for the manufacture of reinforced concrete products. Pallets Technical specifications
GOST 25878-85: Steel moulds for reinforced concrete members. Pallets. Construction and dimensions
GOST 25982-83: Stomatologic tips for a microdrive
GOST 26015-83: Lattices for medical X-radiography. General specifications
GOST 26145-84: X-ray medical cassettes
GOST 26215-84: Hand-held wood-saws
GOST 26221-84: Scattering suppressing linear rasters for medical roentgen apparatuses
GOST 26257-84: Permanent containers for trash ducts of the floors of residential and public buildings. Specification
GOST 26304-84: Industrial pipeline valves supplied
GOST 26346-84: Lighting buses for the ac voltage up to 660 v
GOST 26368-90: Medical light fixtures
GOST 26455-97: Semifixed disk couplings. Parameters, design and dimensions
GOST 26756-2016: Furniture for trade enterprises. General technical conditions
GOST 26756-85: Furniture for trade enterprises. General specifications
GOST 26830-86: Semiconductor electric power converters rated to 5 kv/a inclusive
GOST 26831-86: Medical ultrasonic diagnostic
GOST 26957-97: Variators with wide-angle belt pulleys. General specifications
GOST 27072-86: Diagnostic acoustic generators of signals. Audiometers
GOST 27204-87: Steel moulds for reinforced concrete members. Sides. Construction and dimensions
GOST 2746-90: Screw holders for electric lamps. General specifications
GOST 27598-94: Running rollers road vibration self-moving
GOST 27636-95: Stone extraction and processing equipment
GOST 27735-94: Domestic scales
GOST 28037-89: Wire cutters
GOST 28041-89: Crossings, section insulators, and frogs for contact systems of trams and trolleybuses
GOST 28131-89: Dentist` s chairs
GOST 28241-89: Hand wise. Specification.
GOST 28244-89: Reinforced wires and cords. Specifications
GOST 28244-96: Reinforced wires and cords. Specifications
GOST 2838-80: Wrenches
GOST 28408-89: Manual hoists and trolleys. General specifications
GOST 28456-90: Expansive dowels for building. General specifications
GOST 28556-90: Outboard engines
GOST 28603-90: Devices for uhf-therapy
GOST 28617-90: Metallic and non-metallic inorganic coatings of bicycles, motor cycles, scooters, motor bicycles. General requirements and methods of control
GOST 28703-90: Automatic and semi-automatic instruments for indirect measurement of arterial pressure
GOST 28778-90: Expansion bolt self-anchoring for building. Specifications
GOST 28785-90: Preparative ultracentrifuges and rotors
GOST 28798-90: Spring measuring heads. General specifications
GOST 28848-90: Plain washers. Extra large series. Product grade C
GOST 28912-91: Filters for stores and filters-separators. Technical specifications
GOST 28932-91: Drafting machines
GOST 28933-91: Drawing devices
GOST 28950-91: Drawing instruments. General technical requirements and test methods
GOST 28962-91: Hexagon socket head shoulder screws. Specifications
GOST 28963-91: Hexagon socket button head screws. Metric series. Specifications
GOST 28964-91: Hexagon socket set screws with cup point. Specifications
GOST 29093-91: Umbrellas. General specifications
GOST 29130-91: Protective decorative coating accessories for products of light industry. General requirements
GOST 29329-92: Balance for static weightings
GOST 30176-95: Portable gas-turbine compressor stations of general purpose. General technical requirements
GOST 30222-95: Cone variable speed drives. General specifications
GOST 30223-95: Motorised conveyor drums. General specifications
GOST 30414-96: Weighbridges for weighing of vehicles in motion. General technical requirements
GOST 30540-97: The equipment for manufacture of products from cellular autoclaved concrete. General specifications and control methods
GOST 3057-90: Disk springs. Specifications
GOST 30674-99: Windows of polyvinylchloride profiles. Specifications
GOST 30777-2001: Turned, reclined and turned-reclined devices for windows and balcony doors. Specifications
GOST 30777-2012: Turned, reclined, turned-reclined and sliding devices for windows and balcony doors. Specifications
GOST 30970-2023: Door blocks made of polyvinylchloride profiles. General technical conditions
GOST 31.0101.01-89: Hand wheels, rotating levers, handles, and knobs
GOST 31173-2003: Steel doors. Specifications
GOST 31173-2016: Steel doors. Specifications
GOST 31174-2003: Gates of metall. General specifications
GOST 31174-2017: Gates of metall. General specifications
GOST 31284-2004: Air heaters for industrial and agricultural enterprises. General specifications.
GOST 31445-2012: Steel and cast iron tubes and pipes with protective coatings. Technical requirements
GOST 31523-2012: Food processing machinery. Dough mixers. Specifications
GOST 31563-2012: Pneumatic hammer drills. Technical requirements and testing methods
GOST 31592-2012: Machine reducers. General specifications
GOST 31812-2012: Civil aviation aircraft and helicopter ground support equipment. General technical requirements
GOST 32395-2013: Distribution boards for dwelling-houses. General specifications
GOST 32396-2013: Input-distributional boards for dwellings and public buildings. General specifications
GOST 32397-2013: Distribution boards for industrial and social buildings. General specifications
GOST 33164.1-2014: Mining equipment. Longwall powered roof shocks. Section of support. General specifications
GOST 33164.3-2014: Mining and tunneling equipment. Timbering, mechanized. Hydraulic control systems. Safety requirements and methods of testing
GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
GOST 33330-2015: Railway rolling stock driver's (operator's) armchair. Specifications
GOST 33431-2015: High-voltage boxes of passenger cars for locomotive traction and multiple units. General specifications
GOST 33672-2015: Automobile transport facilities. Antiskid studs. Requirements and test methods
GOST 34013-2016: Seat passenger railcar rolling stock and passenger cars with locomotive traction. General specifications
GOST 34329-2017: Formworks. General specifications
GOST 34350-2017: Fire-fighting techniques. Fire extinguishing trucks. General technical requirements. Test methods
GOST 34433-2018: Trunk pipelines for oil and oil products transportation. Transformer complete substations with voltage from 35 to 220 kV. General specifications
GOST 34565-2019: The main pipeline transport of oil and oil products. Piston and plunger pumps. General specifications
GOST 34610-2019: Pipe fittings. Electric drives. General specifications
GOST 34635-2020: Fire-fighting equipment. Generators of fire-extinguishing aerosol. General technical requirements. Test methods
GOST 34729-2021: Fire equipment. Fire truck ladders. General technical requirements. Test methods
GOST 34914-2022: Windows for industrial buildings. General technical conditions
GOST 3699-82: Low voltoege protective voltageralays. General technical requirements
GOST 3940-2004: Automotive engineering electrical equipment. General specifications.
GOST 3940-84: Electrical equipment for vehicles and tractors. General technical requirements
GOST 4045-75: Hand-operated bench vice
GOST 4153-93: Pruning shears
GOST 4154-93: Pruning shears
GOST 4156-93: Pruning saws
GOST 4380-93: Micrometers with inserts. Specifications
GOST 5088-94: Steel hinges for wooden windows and doors. Specifications
GOST 5089-2003: Locks and latches for doors. Specifications
GOST 5089-2011: Locks, latches, mechanisms cylinders. General specifications
GOST 5089-97: Locks and latches for doors. Specifications
GOST 5090-2016: Hardware devices for wooden windows and doors. Specification
GOST 5090-86: Locking fittings for wooden windows and doors. Types and basic dimensions
GOST 5147-80: Joint clutches. Basic parameters. Design and dimensions
GOST 5147-97: Joint couplings. Parameters, design and dimensions
GOST 538-2001: Locks and building hardware. General specifications
GOST 538-2014: Locks and building hardware. General specifications
GOST 538-88: Lock and building hardware
GOST 5547-93: Engineer's and lineman's pliers. Specifications
GOST 6507-90: Micrometers. Specifications
GOST 6625-85: Mine local ventilating fans
GOST 6815-79: Mains and distribution busways up to 1000 V a.c. General specifications
GOST 6915-89: Instruments for measuring blood pressure within the cardiovascular system
GOST 7075-80: Manual Traveling Underrunning Cranes Specifications
GOST 7210-75: Hand-held metal-cutting shears
GOST 7211-86: Cold chisels
GOST 7212-74: Cape chisels
GOST 7213-72: Center punches
GOST 7214-72: Bench piercers
GOST 7236-93: Flat-nose pliers. Specifications
GOST 7275-75: Adjustable wrenches
GOST 7283-93: Round nose pliers. Specifications
GOST 7328-82: General-purpose and reference mass gages
GOST 7413-80: Bridge overhead traveling cranes, single-girder suspension, general purpose. Specification
GOST 7470-92: Micrometric depth meters. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7945-86: Scoops for finishing works. Specifications
GOST 7948-80: Steel construction plumbs-lines. Specifications
GOST 8519-88: Diesel high-pressure fuel lines and connections. General specifications
GOST 8519-93: Diesel engine fuel injection pipes and their connections
GOST 8594-80: Installation boxes for switches and plug sockets for flush wiring
GOST 868-82: Internal dial gauges graduated in 0,01 mm. Specifications
GOST 8709-82: Light boards for industrial and public buildings
GOST 8878-93: Hexagonal socket cone-point set screws. Product grades A and B. Specifications
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9.313-89: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings on the plastics. General requirements and technological operations
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9018-89: Fuel dispensing pumps. General specifications
GOST 9062-89: Chaplets for iron and steel castings.
GOST 9392-89: Levelling squares and bars. Specifications
GOST 9413-78: Lighting panels for dwelling-houses. General specifications
GOST 9416-83: Building levels. Technical requirements
GOST 9500-84: Portable standard dynamometers
GOST 9533-81: Trowels, tuck pointing tools. Specifications
GOST 9650-80: Pins. Specifications
GOST 9806-90: Lamp-holders for tubular fluorescent lamps and starter-holders. General specifications
GOST R 12.4.013-97: Occupational safety standards system. Goggles. General specifications
GOST R 18.12.02-2017: Technology of the aviation fueling. Installation of the aviation fuel supply typical schemes.General technical requirements
GOST R 18.12.03-2018: Technology of the aviation fueling. Filtering equipment in Aviation Fuel Supply. General technical requirements
GOST R 22.9.06-96: Safety in emergencies. Elastic and power rescuing constructions. General technical requirements
GOST R 50072-92: Multiple slip joint pliers. Specifications
GOST R 50073-92: Pipelines flange types joint fittings. Specifications
GOST R 50336-92: Grooved pins-full-length taper grooved. Specifications
GOST R 50337-92: Grooved pins-full-length parallel grooved with pilot. Specifications
GOST R 50338-92: Grooved pins-full-length parallel grooved, with chamber. Specifications
GOST R 50403-92: Countersunk head screws. Product grades A and B. Specifications
GOST R 50404-92: Slotted pan head screws. Product grades A and B. Specifications
GOST R 50405-92: Slotted cheese head screws. Product grades A and B. Specifications
GOST R 50406-92: Raised countersunk head screws. Product grade A and B. Specifications
GOST R 50571.15-97: Electrical installations of buildings
GOST R 50592-93: Hexagon nuts with flange. Product grade A. Specifications
GOST R 50891-96: Machine reducers. General specifications
GOST R 50892-96: Elastic couplings with a toroid-shape shell. Specifications
GOST R 50895-96: Toothed clutches. Specifications
GOST R 50997-96: Mine's gyrocompass. General specification
GOST R 51015-97: Blades for household and special use. General specifications
GOST R 51016-97: Sets of carbon steel and aluminium alloys. General specifications
GOST R 51017-2009: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods
GOST R 51017-97: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods
GOST R 51057-2001: Fire fighting equipment. Portable fire extinguishers. General technical requirements. Test methods
GOST R 51057-97: Fire engineering. Portable fire extinguishers. General technical requirements. Test methods
GOST R 51066-97: Profile survey systems of vertical shaft guides. General requirements and testing methods
GOST R 51067-97: Mine surveying angle meters. General specifications
GOST R 51078-97: Walking frames. Technical requirements and test methods
GOST R 51080-97: Rollotors. Technical requirements and test methods
GOST R 51083-2015: Wheelchairs for disabled persons. General specifications
GOST R 51083-97: Wheelchairs for disabled persons. General specifications
GOST R 51084-97: Hand-cars for cargo and patients transportation. General specifications
GOST R 51085-97: Elbow crutches. Requirements and test methods
GOST R 51090-2017: Designated public transportation vehicles. General technical requirements of accessibility and safety for disabled persons
GOST R 51090-97: Designated public transportation vehicle. General requirements of accessibility and safety for individuals with disabilities
GOST R 51163-98: Thermodiffusion zinc coatings on fasteners and other small products. General requirements and control methods
GOST R 51223-98: Equipment for bank protection. Sluices for transfer of values. General specifications
GOST R 51224-98: Equipment for bank protection. Doors and manholes. General specifications
GOST R 51246-99: Pneumatic hammer drills. Technical requirements and testing methods
GOST R 51260-2017: Rehabilitation aids trainers. General technical requirements
GOST R 51260-2021: Rehabilitation simulators. General technical requirements
GOST R 51260-99: Rehabilitation simulators for disabled persons. General specifications
GOST R 51261-2017: Support stationary devices for disabled persons. Types and technical requirements
GOST R 51261-99: Support stationary devices for disabled persons. Types and technical requirements
GOST R 51268-99: Scissors. General specifications
GOST R 51628-2000: Distribution boards for dwelling-houses. General specifications
GOST R 51732-2001: Input-distributional boards for dwellings and public buildings. General specifications
GOST R 51764-2001: Rehabilitation transportation boarding devices for disabled persons. General technical requirements
GOST R 51764-2019: Rehabilitation lifting transport devices for disabled people. General technical requirements
GOST R 51778-2001: Distribution boards for industrial and social buildings. General specifications
GOST R 51802-2001: Aggressive and other special media stability test methods for machines, instruments and other industrial products
GOST R 51918-2002: The equipment for care of coordinates through the vertical mine. General technical requirements and test methods
GOST R 51970-2002: Ski-poles for walk and sport race skiing. Specifications
GOST R 52085-2003: Formworks. General specifications
GOST R 52230-2004: Electrical equipment for vehicles and tractors. General specifications
GOST R 52284-2004: Fire aerial ladders. General technical requirements. Test methods
GOST R 52286-2004: Push-chairs for carrying disabled persons. Main parameters. Technical requirements
GOST R 52286-2019: Wheelchairs are transport rehabilitation. Main settings. Technical requirements
GOST R 52603-2006: Waterparks. Water slides of 2 m height and more. Safety of structure and test methods. General requirements
GOST R 52726-2007: Alternating current disconnectors and earthling switches for voltage above 1 kV and operating mechanisms for them. General specifications
GOST R 52747-2007: Vehicles. Antiskid studs. General specifications
GOST R 52787-2007: Hinge and pliers tools. Technical requirements
GOST R 52868-2007: Cable tray systems and cable ladder systems for cable management. General technical requirements and test methods
GOST R 52906-2008: Equipment of the aviation fuelling system. General technical requirements
GOST R 53210-2008: Composite containers. General specifications
GOST R 53276-2009: Fire equipment. Hanging ladders for rescue from height. General technical requirements. Test methods
GOST R 53278-2009: Fire equipment. Fire valves. General technical requirements. Test methods
GOST R 53279-2009: Fire equipment. Fire connecting heads. General technical requirements. Methods of testing
GOST R 53284-2009: Fire engineering. Generators of extinguishing aerosol. General technical requirements. Test methods
GOST R 53285-2009: Fire engineering. Portable generators of extinguishing aerosol. General technical requirements. Test methods
GOST R 53286-2009: Fire engineering. Automatic dry chemical fire fighting system. Module. General technical requirements. Test methods
GOST R 53287-2009: Water and foam fire fighting systems. Fire alarm hydraulic, fire foam inducer, feeder. General technical requirements. Test methods
GOST R 53288-2009: Automatic water and foam extinguishers systems. Automatic fire water mist spray extinguishers systems. Modules. General technical requirements. Test methods
GOST R 53290-2009: Fire engineering. Foam fire-extinguishing installations. Low expansion foam generators for subsurface extinguishing in tanks. General technical requirements. Test methods
GOST R 53291-2009: Portable and movable devices of fire extinguishing with high-velosity submission of fire quenching matter. General technical requirements. Test methods
GOST R 53328-2009: Fire fighting technics. Fire extinguishing trucks. General technical requirements. Test methods
GOST R 53329-2009: Fire elevators. General technical requirements. Test methods
GOST R 53330-2009: Fire foam elevators. General technical requirements. Test methods
GOST R 53384-2009: Steel and cast iron tubes and pipes with protective coatings. Technical requirements
GOST R 53432-2009: Printed circuit boards. General technical requirements for manufacture
GOST R 53466-2009: Optics and optical equipment. Medical thermographs. General technical requirements. Methods of measuring the major parameters
GOST R 53478-2009: Food processing machinery. Dough mixers. Specifications
GOST R 53543-2009: Aircraft and helicopter ground support equipment. General technical requirements
GOST R 53819-2010: Vehicles. Fastenings wheels. Technical requirements and test methods
GOST R 53935-2010: Screwdrivers for fitting and assembling for recessed screws and wood screws. General technical requirements, methods of control and tests
GOST R 54086-2010: Pressure regulators. General specifications
GOST R 54415-2011: Equipment for skate grounds. Safety of structure and test methods. General requirements
GOST R 54488-2011: Adjustable wrenches. Specifications
GOST R 54772-2011: Supple mining main vents and shaped components for them. General technical requirements and test methods
GOST R 54784-2011: Testing agricultural tractors and machines. Methods for estimation of technical parameters
GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.
GOST R 54797-2011: Boxes high-voltage passenger cars for locomotive traction and multiple units. The general technical requirements
GOST R 54962-2012: Railway rolling stock driver’s (operator's) armchair. Specifications
GOST R 54967-2012: Food processing machinery and equipment. Сutters. Safety and hygiene requirements
GOST R 54970-2012: Food processing machinery. Centrifugal devices for drying vegetables and fruits. Safety and hygiene requirements
GOST R 55158-2012: Mining equipment. Haulage and shunting mining winches. General technical requirements and test methods
GOST R 55511-2013: Pipeline valves. Electric actuators. General specifications
GOST R 55602-2013: Switching devices for railway traction network and power substations earthling. General specifications
GOST R 55622-2013: Complex security systems. Hydraulic gun carriage trunks with Remote control. General technical requirements
GOST R 55728-2013: Mining equipment. Underground hydromonitors. Safety requirements and test methods
GOST R 55756-2013: Integrated system of general technical requirements. Electronic components. General technical requirements
GOST R 55995-2014: Seat passenger railcar rolling stock and passenger cars with locomotive traction. General specifications
GOST R 55998-2014: Petroleum and natural gas industries. Offshore production installation. Evacuation ways and temporary safe refuges. General requirements
GOST R 56028-2014: Fire engineering. Automatic gas-powder fire extinguishing systems. General technical requirements. Test methods
GOST R 56057-2014: LED light-optical systems for railway signal alarm. General technical requirements and test methods
GOST R 56288-2014: The easily dumped window constructions with double-glazed windows for buildings. General specifications
GOST R 56330-2014: Medical equipment. Technical means of placement and transfer of patients in the prehospital. General specifications and test methods
GOST R 56356-2015: Metal shelving for archives. Specification
GOST R 56422-2015: Metal cabinets for storage of clothing. Specifications
GOST R 56513-2015: Metal cabinets for archives. Specifications
GOST R 57384-2017: Secure storage device. Fire resistance safes and cabinets. Classification and methods of fire resistance tests
GOST R 57766-2017: Chairs with medical equipment. Types, technical requirements and methods of control
GOST R 57797-2017: Hydraulic jack-pullers. General technical requirements
GOST R 57981-2017: Hexagon socket screw keys. Specifications
GOST R 58037-2017: Safe boxes. Specifications
GOST R 58088-2018: Mining equipment. Mine parachutes for cages. Specifications
GOST R 58089-2018: Mining equipment. Suspension gears for mine cages. General specifications
GOST R 58249-2018: Machines for planting, harvesting, post-harvest processing of potatoes. Technical requirements
GOST R 58280.1-2018: Medical Products. Equipment for thermal disinfection / disposal of medical waste. The method of dry hot air. Part 1. General requirements
GOST R 58352-2019: An international coastal connection for supplying water to a water extinguishing system. Dimensions and specifications
GOST R 58361-2019: The main pipeline transport of oil and oil products. Welding equipment. General specifications
GOST R 58365-2019: DC switches for voltages above 1000 V for traction substations and linear devices for traction power supply of the railway. General specifications
GOST R 58513-2019: Plumbing steel construction. Technical conditions
GOST R 58514-2019: Building levels. Technical conditions
GOST R 58515-2019: Trowel, shovels and cuts. Technical conditions
GOST R 58517-2019: Paint rollers. Technical conditions
GOST R 58518-2019: Steel construction hammers. Technical conditions
GOST R 58519-2019: Rules, graters and graters. Technical conditions
GOST R 58584-2019: Mining engineering. Switch points in self-rescuers. Safety requirements. Test methods
GOST R 58621-2019: The main pipeline transport of oil and oil products. Hose of a high pressure. General specifications
GOST R 58682-2019: Universal judicial towers. Technical requirements and test methods
GOST R 58684-2019: Fireproof ship doors. General specifications
GOST R 58699-2019: Wood-aluminum window blocks. Technical conditions
GOST R 58714-2019: The main pipeline transport of oil and oil products. Pipelines from flexible flat sleeves. General specifications
GOST R 58872-2020: Marine cable lugs with flat clamping part for conductors up to 16 mm2. Technical requirements
GOST R 58934-2020: Plants for the manufacture of reinforced concrete volume blocks of sanitary cabins and elevator shafts. Specifications
GOST R 58936-2020: Optics and Photonics. Endoscopes and medical endotherapeutic devices. General technical requirements and test methods
GOST R 59620-2022: Public roads. Spherical (spherical segmental) combined bearing parts for bridge structures. General specifications
GOST R 70348-2022: Trunk pipeline transport of oil and petroleum products. Marine stanchions. General specifications
GOST R 70379-2022: Trunk pipeline transport of oil and petroleum products. Oil and petroleum products vapor recovery unit of combined (adsorption-absorption) type. Technical specifications
GOST R 70407-2022: Flexible sanitary and technical water supply line. Specifications
GOST R 70479-2022: Apparatus for ultrasound therapy. General specifications
GOST R 70595-2022: Shipboard fittings. General specifications
GOST R 70616-2022: Strips for inscriptions and marking of shipboard electrical switchgear. Types, main dimensions and technical requirements
GOST R 70617-2022: Details of the grounding of marine electrical equipment and cables. Specifications
GOST R 8.929-2016: State system for ensuring the uniformity of measurements. Measuring complexes for railway contact networkРІР‚в„ўs parameters measuring. Technical requirements
GOST R ISO 7049-93: Cross recessed pan head tapping screws. Specifications
GOST R ISO 7050-93: Cross recessed countersunk head tapping screws. Specifications
GOST R ISO 7051-93: Cross recessed raised countersunk head tapping screws. Specifications
GOST R ISO 8741-93: Pins grooved-half-length reverse taper grooved. Specifications
GOST R ISO 8742-93: Pins grooved-third-length centre grooved. Specifications
GOST R ISO 8743-93: Pins grooved-half-length centre grooved. Specifications
GOST R ISO 8745-93: Pins grooved-half-length taper grooved. Specifications
GOST R ISO 8746-93: Pins grooved with round head. Specifications
GOST R ISO 8747-93: Pins grooved with countersunk head. Specifications
I 1.09-10: Instructions for connecting insulated conductors of wires and cables
MDS 81-39.2005: Individual elemental estimate of the consumption rate of materials and labor costs for the finishing of the premises with KNAUF complete systems. Standard flow charts for finishing works using KNAUF complete systems. Volume 1. Individual elemental estimat
NPB 101-2005*: Fire safety standards of the Republic of Belarus. The main fire trucks. General technical requirements. Test methods
NPB 151-2000: Fire-fighting cabinet. Technical requirements of fire safety. Test methods
NPB 153-2000*: Fire fighting equipment. Fireheads connecting. Technical requirements for fire safety. Test methods
NPB 154-2000: Fire machinery. Fire hydrants valves. Specifications for fire safety. Test methods.
NPB 155-96: Fire engineering. Portable fire extinguishers. General reguirements and Test Methods
NPB 156-96: Fire engineering. Wheeled fire extinguishers. General reguirements and test methods
NPB 163-97*: Fire fighting equipment. The main fire trucks. General technical requirements. Test methods
NPB 188-2000: Fire aerial ladder. General technical requirements. Test methods
NPB 192-2000: Fire engineering. Communnication and lighting truck. General technical requirements. Test methods
NPB 195-2000: Fire water tenders, complete parts and accessories. Release from repair. General technical requirements. Test methods
NPB 197-2001: Fire elevators. General technical requirements. Test methods
NPB 198-2001: Fire elevators, complete parts and accessories. Release from repair. General technical requirements. Test methods
NPB 199-2001: Engineering fire. Extinguishers. Pressurizing sources. Communal specifications. Test methods
NPB 314-2003: Firefoam elevators. General technical requirements. Test methods
NPB 316-2003: Portable and movable devices of fire extinguishing with high-velocity submission of fire quenching matter. Requirements of fire safety. Test methods
NPB 60-97: Fire engineering. Generators of extinguishing aerosol. General technical requirements. Test methods
NPB 61-97: Fire engineering. Foam fire fighting systems. Low expansion foam generators for subsurface fire fighting systems of the tanks. General technical requirements. Test methods
NPB 63-97: Automatic foam fire extinguishing installations feeders. general technical requirements. test methods
NPB 67-98: Automatic dry chemical fire fighting systems. Module. General technical requirements and test methods
NPB 73-98: Fire engineering. Generators of extinguishing aerosol of operative application. General technical requirements. Test methods
NPB 80-99: Automatic fire water mist spray extinguishing systems. modules. General technical requirements. Test methods
ODM 218.2.002-2008: Recommendations for the design and installation of polymer bridge bearing parts
ODM 218.2.066-2016: Guidelines for the use of anchor piles and micropiles as part of the engineering protection of roads
ODM 218.3.103-2018: Recommendations for the use of screw piles on roads
ODM 218.6.023-2017: Guidelines for Traffic Control and Safety Barriers at Road Construction Sites
OST 108.033.01-86: mechanical stokers. Technical conditions.
OST 26-04-280-93: Pipeline fittings of cryogenic equipment products. General specifications.
OST 26-07-1203-85: Pipeline fittings. Electrolytic, chemical and diffusive coating. Technical requirements.
OST 26-07-2026-80: Node friction heel-toe. Design and dimensions.
OST 26-07-2051-82: Pipeline fittings. Climatic tests methods.
OST 26-07-2065-85: Quality control program for nuclear thermal power plant special fittings.
OST 26-07-596-72: Electric drives for pipeline fittings. Export including tropical climate countries. General requirements.
OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements
OST 302-07-1152-92: Cylindrical helical compression springs. General specifications.
OST 34-13-016-88: Self-tapping bolts. Design and dimensions. Technical requirements
OST 36-13-90: Shields and consoles of automation systems for technological processes. General technical conditions
OST 37.001.163-97: Fingers. Technical specifications
OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.
OST 68-11-96: Drawing instruments and devices for mapping. General specifications.
OST 68-12-97: Devices for forced centring of geodetic instruments. Types, main parameters and specifications.
OST 68-16-02: Cartographic instruments. General specifications
OST 95 227-92: Non-standardized products of general machine-building applications. General technical requirements.
PNST 320-2018: Bearing structures of railway signaling devices. General technical requirements
R 50.1.001-94: Multilevel printed boards. Design and use
R 50-112-89: Recommendations. Hardening coatings used in the manufacture and restoration of textile equipment parts and machines for the processing of chemical fibers
R 50-127-92: Recommendations. The designs are the basic carriers of radio-electronic means. Restrictive list of types of coatings
R 78.36.033-2013: Application monitoring and comparative analysis of testing various types of window units, blinds, security grilles and glazing. Classification, methods of installation and strengthening of the structure. Guidelines
RD 05-335-99: Requirements for the manufacture of mine electrical equipment with a voltage of 1140 V
RD 22-207-88: Lifting machines. General requirements and production standards
RD 36-62-00: Hoisting equipment. General technical requirements.
RD 45.146-2000: Plastic console for cable manholes, sewers and premises of communication enterprises. General technical requirements
RD 50-541-85: Guidelines for the implementation of the standards of the Unified System for the Protection of Products and Materials Against Corrosion, Aging and Biodeterioration (ESHSC) in industries
RD 50-708-91: The leading document on standardization. Instruction. Printed-circuit plates. Requirements to designing.
RST RSFSR 38-87: Paper wire clips. Technical conditions
RST RSFSR 778-91: Filling stations. General technical requirements
SO 153-34.03.603-2003: Guidelines for Use and Testing of Protective Means Used in Electrical Installations
SP 128.13330.2012: Aluminium structures
SP 128.13330.2016: Aluminium structures
SP 53-101-98: Manufacturing and quality control of steel structures for construction
SP 9.13130.2009: Fire Engineering. Fire extinguishers. Requirements to Operation
ST CKBA 097-2019: Pipe fittings. Test methods for resistance to climatic external factors
ST RK 1489-2005: Fire fighting equipment. Fire extinguishing aerosol generators. General technical requirements. Test methods
ST RK 1976-2010: Fire engineering. Tower ladders. General specification
ST RK 1980-2010: Fire engineering. Basic fire fighting trucks. General specification
ST RK 1981-2010: Fire engineering. Fire aerial ladders. General specification
ST RK GOST R 52603-2009: Water parks. Water slides of 2 m height and more. Structure safety and testing methods. General requirements]
ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements
ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants
ST TsKBA 021-2004: Painting and conservation of pipeline valves and drive devices for it supplied for nuclear power plants. Typical technological instructions for cleanliness, dyeing and conservation
ST TsKBA 030-2006: Pipe fittings. Springs helical cylindrical. General technical conditions
ST TsKBA 042-2008: Pipe fittings. Electrolytic, chemical, anodic and diffusion coatings
ST TsKBA 073-2009: Pipe fittings. Friction units, heel-toe and stem-sleeve. Design and dimensions
ST TsKBA 087-2010: Pipe fittings. Electric drives. General technical conditions
ST TsKBA 090-2013: Pipe fittings. Pneumatic actuators and hydraulic actuators. General technical conditions
ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual
STB 1015-97: Cultural and general, and household products made of plastic. General specifications
STB 1575-2005: Mechanized timberings for benches. Basic parameters. General specifications. Test methods
STB 1679-2006: Cultivators for inter-row tillage. General specifications
STB 1831-2008: Gear pumps for volume hydraulic drive. Specifications
STB 2511-2017: The system of fire safety standards. Fire trucks main. General technical requirements. Test methods
STB 2512-2017: The system of fire safety standards. Fire ladders and their components. General technical requirements. Test methods
STB 2513-2017: The system of fire safety standards. Car lifts General technical requirements. Test methods
TU 16-90: Switches automatic type BA 57-35
TU 2-034-228-87: Threaded and Radius Patterns
TU 24-00.10.019-88: Two-line manual lubricating station. Technical conditions
TU 3645-002-16989527-99: PKN-03 Cutter for manual oxygen cutting
TU 3645-033-05785477-98: Torch propane-oxygen for powder surfacing GN-5P
TU 3680-001-04698606-04: Pipe Support
TU 5270-001-44991977-97: Aluminum Alloy Windows and Doors
TU 5271-001-48810984-00: Window structures made of aluminum alloys for fencing balconies and loggias
TU U 29.4-30482268.002-2001: Check valves, flame arresters and shut-off valves, as well as their combinations for gas-flame treatment of metals types KO, OB, OT
Customers Who Viewed This Item Also Viewed:
|
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.