GOST 32661-2014
ГОСТ 32661-2014
|
|
Fibrе reinforced thermosetting plastic pipes and parts of pipelines. General specifications
Трубы и детали трубопроводов из реактопластов, армированных волокном. Общие технические условия
Status: Effective - Introduced for the first time. IUS 4-2015
This standard applies to pipes and pipeline parts made of fiber reinforced thermosetting plastics (hereinafter referred to as pipes and fittings), DN from 300 to 3000, permissible stiffness up to 10,000 Pa, permissible working pressure up to 3.2 MPa, working medium temperature up to 35 degrees C intended for construction of water supply, drainage and sewage systems, transportation of liquid hydrocarbons, steam, gaseous and corrosive media, as well as special purpose systems. This standard applies to pipes manufactured by continuous winding, intermittent winding and centrifugal molding, intended for underground, surface and above-ground installation.
Настоящий стандарт распространяется на трубы и детали трубопроводов из реактопластов, армированных волокном (далее - трубы и фитинги), DN от 300 до 3000, допустимой жесткостью до 10000 Па, допустимым рабочим давлением до 3,2 МПа, температурой рабочей среды до 35 градусов С, предназначенные для строительства систем водоснабжения, дренажа и канализации, транспортирования жидких углеводородов, пара, газообразных и агрессивных сред, а также систем специального назначения. Настоящий стандарт распространяется на трубы, изготавливаемые методами непрерывной намотки, периодической намотки и центробежного формования, предназначенные для подземной, наземной и надземной прокладки
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
6/6/2014
SKU: RUSS73633
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
93 Civil Engineering »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.01 Pipelines and their components in general »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.01 Pipelines and their components in general »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.030 External sewer systems »
National standards »
93 CIVIL CONSTRUCTION »
93.030 External sewer systems »
The Document References:
GN 2.1.6.1338-03: Maximum allowable concentrations (MACs) of pollutants in the air of residential areas
GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air
GOST 10-88: Inside micrometers. Specifications
GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 12.4.028-76: Respirators шб-1 "lepestok"
GOST 12.4.068-79: Occupational safety standards system. Dermatologic personal safety means. Classification and general requirements
GOST 12.4.121-83: Industrial filtering gas-masks
GOST 12423-66: Plastics. Standard atmospheres for conditioning and testing specimens
GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces
GOST 14192-96: Cargo marking
GOST 15173-70: Plastics. Method for determination of mean coefficient of linear thermal expansion
GOST 17.2.3.01-86: Nature protection. Atmosphere. Air quality control regulations for populated areas
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 17139-2000: Textile glass. Roving. Specifications
GOST 20010-93: Industrial rubber gloves
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 24297-87: Input inspection of products. General provisions.
GOST 25.601-80: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for tensile properties on plane specimens at normal, elevated and law temperatures
GOST 27078-86: Thermoplastic pipes. Methods of determination of the tubes length after heating
GOST 30775-2001: Resources saving. Waste treatment. Waste classification, identification and coding. Basic principles
GOST 3749-77: Checking 90° squares. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4650-80: Plastics. Methods for the determination of water absorption
GOST 5378-88: Vernier protractors. Specifications
GOST 7470-92: Micrometric depth meters. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
SanPiN 2.1.7.1322-03: Hygienic requirements regarding dumping and decontamination of industrial and consumable waste
SNiP 2.04.03-85: Sewage. External systems and structures
SNiP 3.05.05-84: Processing equipment and process pipelines
SP 40-102-2000: Design and installation of pipeline systems of water supply and sewerage made of polymeric materials. General requirements. To replace SN 478-80
SP 40-104-2001: Design and installation of underground pipelines of water supply with fibreglass pipes. Amendments, published in the BST 2002, №1 № 4, № 5, 2005.
SP 40-105-2001: Design and installation of underground sewage pipelines made of fibreglass pipes
The Document is Referenced By:
GOST 22000-2023: Concrete and reinforced concrete pipes. Types and main parameters
GOST R 57602-2017: Fibre reinforced thermosetting plastic pipes and pipelines. Nondestructive testing methods with exploiting
GOST R 57776-2017: Fibre reinforced thermosetting plastic pipes. Nondestructive testing method with manufacturing
GOST R 57949-2017: Fiberglass-reinforced thermosetting plastic pipes and parts of pipelines. Methods for regression analysis
Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Metals. Methods of tension test
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.