GOST R IEC 61037-2001

ГОСТ Р МЭК 61037-2001

Electricity metering. Tariff and load control. Particular requirements for electronic ripple control receivers

Учет электроэнергии. Тарификация и управление нагрузкой. Особые требования к электронным приемникам с импульсным управлением

Status: Not effective - Canceled. Registration information 1234-st dated 12/13/2011

This standard applies to electronic receivers with impulse control, used indoors for receiving and converting fixed sound frequency pulses superimposed on the voltage of the electrical distribution network, as well as for carrying out the corresponding switching operations, and establishes requirements for the standard testing of receivers. The standard does not establish requirements for structural details, internal to the receiver. This standard does not establish rules for acceptance tests and tests for compliance with technical requirements.

Настоящий стандарт распространяется на электронные приемники с импульсным управлением, применяемые внутри помещений для приема и преобразования импул��сов фиксированной звуковой частоты, наложенных на напряжение электрической распределительной сети, а также для выполнения соответствующих операций переключения, и устанавливает требования к типовому испытанию приемников. Стандарт не устанавливает требований к конструктивным деталям, внутренним по отношению к приемнику. Настоящий стандарт не устанавливает правила проведения приемочных испытаний и испытаний на соответствие техническим требованиям

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 35

Approved: Gosstandart of Russia, 12/24/2001

SKU: RUSS73634

Price: $446.93

The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 3 Activities of testing laboratories » 3.2 Technical equipment of testing laboratories » 3.2.2 Measuring instruments and test equipment » Instruments for electrical and magnetic measurements »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.220 Electricity. Magnetism. Electrical and magnetic measurements » 17.220.20 Measurement of electrical and magnetic quantities »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.220 Electricity. Magnetism. Electrical and magnetic measurements » 17.220.20 Measurement of electrical and magnetic quantities »

National Standards for KGS (State Standards Classification) » Latest edition » P Measuring devices. Automation and computing facilities » P3 Instruments for electrical and magnetic measurements » P32 Instruments for measuring electrical power and amount of electricity »

The Document References:

GOST 14254-96: Degrees of protection provided by enclosures (IP Code)

GOST 22261-94: Measuring instruments for electrical

GOST 27483-87: Fire hazard testing. Test methods. Glow-wire test and guidance

GOST 28199-89: Basic environmental, testing procedures. Part 2. Tests. Test A: Cold

GOST 28200-89: Basic environmental testing procedures. Part 2. Tests. Test B: Dry heat

GOST 28203-89: Basic environmental testing procedures. Part 2. Tests. Test Fc and guidance: Vibration ( sinusoidal )

GOST 28213-89: Basic environmental testing prosedures. Part 2. Tests. Test Ea and guidance: Shock

GOST 28216-89: Basic environmental testing procedures. Part 2. Tests. Test Db and guidance: damp heat, cyclic (12 + 12 hour cycle)

GOST 29322-92: Standard voltages

GOST 30012.1-2002: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 1. Definitions and general requirements common to all parts

GOST 8865-93: Electrical insulation system. Thermal evalution and classification

GOST R 50779.71-99: Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection

GOST R 51317.4.2-99: Electromagnetic compatibility of technical equipment. Immunity to electrostatic discharge. Requirements and test methods

GOST R 51317.4.3-99: Electromagnetic compatibility of technical equipment. Radiated, radio-frequency, electromagnetic field immunity. Requirements and test methods

GOST R 51317.4.4-99: Electromagnetic compatibility of technical equipment. Immunity to electrical fast transient/burst. Requirements and test methods

GOST R 51318.22-99: Electromagnetic compatibility of technical equipment. Man-made radio disturbance from information technology equipment. Limits and test methods

GOST R IEC 335-1-94: Safety of household and similar electrical appliances. General requirements and test methods

Customers Who Viewed This Item Also Viewed:

Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Technical Regulations of the Eurasian Economic Union "On the Safety of Chemical Products"
Language: English
Price: $102.96
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Determination of categories of rooms, buildings and external installations for explosion and fire hazards
Language: English
Price: $148.50
Unified system for design documentation. Rules for making exploitative documents
Language: English
Price: $180.18
Standards of equipment of buildings, premises and facilities of automated systems, fire alarms, automatic fire extinguishing and fire warning.
Language: English
Price: $473.84
General requirements for machines, instruments and other industrial products as to environment mechanical stability
Language: English
Price: $175.23
Technical Regulations of Customs Union, On safety of machines and equipment
Language: English
Price: $110.40
Rostehnadzor (RTN) Order N 116 of 25.03.2014 "On approval of the Federal rules and regulations in the field of industrial safety". Rules of industrial safety of hazardous production facilities that use equipment operating under excess pressure. Reg. № 323
Language: English
Price: $972.28
Non-destructive testing. Capillary methods. General requirements
Language: English
Price: $121.77
Steel and alloys. Methods for detection and determination of grain size
Language: English
Price: $170.28
Sulphur for industrial use. Sampling and preparation of samples
Language: English
Price: $44.55
Steel. Metallographic methods for the determination of non-metallic inclusions
Language: English
Price: $218.95
Jet fuels. Specifications
Language: English
Price: $86.13
Two lay rope type ЛК-РО construction 6x36(1+7+7/7+14)+7x7(1+6). Dimensions
Language: English
Price: $42.68
Two lay rope type ЛК-РО construction 6x36(1+7+7/7+14)+1 o.с. Dimensions
Language: English
Price: $62.08
Mixtures classification of hazard for health
Language: English
Price: $134.64
Aviation turbine fuel Jet A-1. Specifications
Language: English
Price: $144.53
Dry-type transformers. General specifications
Language: English
Price: $258.32
High-pressure welded steel vessels. General technical requirements
Language: English
Price: $763.29


RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!