GOST 8269-87
ГОСТ 8269-87
|
|
Crushed aggregate of natural rock, crushed-gravel aggregate and gravel for construction work. Testing methods
Щебень из природного камня, гравий и щебень из гравия для строительных работ. Методы испытаний
Status: Not effective - Superseded. IUS 6-1998
The standard applies to crushed stone from natural stone, gravel and crushed stone from gravel with an average grain density (including pores) of more than 2.0 g
Стандарт распространяется на щебень из природного камня, гравий и щебень из гравия со средней плотностью зерен (включая поры) более 2,0 г/см.куб, применяемые в соответствии с требованиями нормативно-технических документов назаполнители для бетонов монолитных и сборныхбетонных и железобетонных конструкций и на материалы для соответствующих видов строительных работ, и устанавливает методы их испытаний.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Building Committee,
6/3/1987
SKU: RUSS73636
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
K.63 Crushed stone, gravel and sand for construction work »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.1 Testing and control of products of mining and non-metallic industry »
4.1.2 Non-metallic minerals, materials and products »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.15 Mineral materials and products »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.15 Mineral materials and products »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh19 Test methods. Packaging. Marking »
National Standards for OKSTU »
CONSTRUCTION MATERIALS, EXCEPT REFINED CONCRETE STRUCTURES AND PARTS »
Non-metallic building materials »
The Document is Replaced With:
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
As a Replacement Of:
GOST 8269-76: Crushed stone from natural stone, gravel and crushed stone from gravel for construction works. Methods of tests
The Document References:
GOST 10260-82: Crushed stone gravel for construction works. Specification
GOST 1277-75: Reagents. Silver nitrate. Specifications
GOST 166-80: Vernier callipers. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 1780-74: Calcium cyanamide. Specification
GOST 2184-77: Sulphuric acid for industrial use. Specifications
GOST 22524-77: Glass density bottles. Specifications
GOST 2263-79: Sodium hydroxide for industrial use. Specifications
GOST 23711-79: Balance for static weightings. General technical requirements
GOST 23732-79: Water for concretes and mortars. Specifications
GOST 23845-86: Hard rocks for crushed stone production for construction. Technical requirements and test methods
GOST 24100-80: Raw materials for crushed gravel, gravel and sand for construction. Technical requirements and test methods
GOST 24104-88: General purpose and reference laboratory balances
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 2874-82: Drinking water. Hygienic requirements and quality control
GOST 28840-90: Machines for tension, compression and bending tests of materials
GOST 3118-77: Reagents. Hydrochloric acid. Specifications
GOST 4166-76: Reagents. Sodium sulphate. Specifications
GOST 4171-76: Reagents. Sodium sulphate 10-aqueous. Specifications
GOST 4214-78: Reagents. Silicic acid aqueous. Specifications
GOST 450-77: Calcium chloride technical. Technical conditions
GOST 5817-77: Reagents. Tartaric acid. Specifications
GOST 6613-86: Square meshed woven wire gauzes
GOST 7502-80: Measuring metal tapes. Specifications
GOST 7502-89: Measuring metal tapes. Specifications
GOST 8030-80: Sewing hand needles. Specifications
GOST 8267-82: Crushed stone made from natural stone for construction works. Specification
GOST 8268-82: Gravel for construction work
GOST 8735-88: Sand for construction work. Testing methods
GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications
The Document is Referenced By:
GOST 10060.4-95: Concretes. Structure-mechanical rapid method for the determination of frost-resistance
GOST 10181.3-81: Concrete mixture. Test method of determination of porosity
GOST 10260-82: Crushed stone gravel for construction works. Specification
GOST 12375-70: Single-rotor crushers for coarse grinding
GOST 12376-71: Single rotor crusher for medium and small grinding. Specifications
GOST 12730.4-78: Concretes. Methods of determination of porosity parameters
GOST 14050-93: Limestone meal (dolomite)
GOST 16426-81: Electrotechnical marble crumb. Specifications
GOST 18866-93: Crushed blast furnace slag for mineral wool. Specification
GOST 22733-77: Soils. A laboratory method for determining maximum density
GOST 23422-87: Building materials. Neutron method of humidity measurement
GOST 24544-81: Concretes. Methods for determining shrinkage and creep deformations
GOST 25226-96: Crushed stone and sand perlite for the production of expanded perlite. Technical conditions
GOST 25607-94: Crushed stone-gravel-sandy mixtures for road and airfield surfacing and bases. Specifications
GOST 27412-93: Jaw crushers
GOST 4416-73: Marble for welding material. Specifications
GOST 4416-94: Marble for welding material. Specifications
GOST 5578-94: Slag crushed stone and slag sand of ferrous and non-ferrous metallurgy for concretes. Specifications
GOST 7032-75: Bentonite clay for fine and building ceramics
GOST 8267-82: Crushed stone made from natural stone for construction works. Specification
GOST 8268-82: Gravel for construction work
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
GOST 9854-81: Quartzite’s crystalline for the production of silica products. Specifications
GOST R 42.4.01-2014: Civil defence. Civil defence constructions. Test methods
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP 2.03.11-85: A manual for monitoring the state of building metal structures of buildings and structures in aggressive environments, conducting surveys and designing the restoration of corrosion protection of structures
Manual for SNiP 2.03.11-85: Designer's Guide to Corrosion Protection for Concrete and Reinforced Concrete Structures
Manual for SNiP 2.03.11-85: Manual on the design of corrosion protection for stone, reinforced stone and asbestos-cement structures
Manual for SNiP 3.06.03-85: Manual for surface treatment on roads
Manual for SNiP 3.06.03-85: Manual on the construction of coatings and foundations of roads and airfields from soils reinforced with cementing materials to SNiP 3.06.03-85 and SNiP 3.06.06-88
Manual for SNiP 3.06.03-85: Manual for the construction of asphalt concrete pavements and foundations of roads and airfields
Manual for SNiP 3.06.03-85: Manual for the preparation and use of bitumen road emulsions
MI 2488-98: Recommended Practice. National Measurement Standards. Method for Accelerated Determination of Water-to-Cement Ratio and Prediction and Monitoring Strength of Cement From its Shrinkage
MI 2489-98: Recommended Practice. National Measurement Standards. Cement Materials. Method for Accelerated Determination of Freeze-Thaw Resistance of Concrete (Grout) According to Structural Mechanical Characteristics
R 392-80: Recommendations on the composition and technology of the preparation of very heavy concrete for pipeline weights
R 589-86: Recommendations for ballasting of pipelines at underwater crossings
RD 14-16-2-89: Guidelines for the collection and preparation of samples for determining the particle size distribution and mechanical strength of limestone
RD 14-16-4-90: Guidelines for the determination of the particle size distribution of fluxed limestone by the method of sieve analysis
RD 31.35.13-90: Instructions for repair of hydraulic structures in maritime transport. Minmorflot, Soyuzmorniiproekt, 1990
RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RTM 17-01-2002: Guiding technical materials on the design and use of steel-fiber-concrete building structures
RTM 17-03-2005: Guiding technical materials on the design, manufacture and use of steel fiber concrete structures on steel wire fiber
RTM 5-05-2009: Guiding technical materials for the design, manufacture and use of steel fiber concrete structures on the fiber of thin steel wire
RTM 75-95: Process Guidelines for Factory Production of Prefabricated Prestressed Reinforced Concrete Structures -
SN 549-82: Guidelines for the Design, Fabrication, and Application of Structures and Products Made of Organic Fiber Reinforced Concrete (Arbolite)
SNiP 3.06.04-91: Bridges and pipes
SP 11-109-98: Prospecting for soil building materials
TR 138-03: Technical recommendations on the use of rolled low cement concrete in pavement structures
TR 159-04: Technical recommendations on the technology of construction of urban roads in the winter
TU 102-161-77: Coatings weighting reinforced concrete monolithic main pipelines such as PZHU
TU 102-162-78: Weighers prefabricated reinforced concrete belt type UBP
TU 102-300-81: Weights prefabricated reinforced concrete covering type UBO
TU 102-416-86: Garage reinforced concrete prefabricated for individual use
TU 102-461-88: Garage reinforced concrete prefabricated box single and double row collective use
TU 102-46-75: Weights prefabricated cantilever type UKS
TU 102-737-95: Concrete marsh weighting compounds wedge-shaped for pipes with a diameter of 426, 325, 219 (ZUBKm)
TU 102-738-95: Weighted reinforced concrete marsh wedge with a diameter of 530, 426, 525 with low steel reinforcement consumption (1 UBKm, 2 UBKm)
TU 102-84.3-87: Garage reinforced concrete prefabricated box with two floors for collective use
TU 5718-001-00011168-2000: Gravel-Mastic Asphalt Concrete Mixes and Asphalt Concrete
VSN 123-77: Instruction for installation of paving and roadbeds made from crushed stone, gravel and sand materials impregnated with organic binders
VSN 126-90: Anchored Cast-In-Place Concrete Tunnel Lining for Transportation Tunnels and Subways. Design and Execution Standards
VSN 164-69: Technical guidelines for the installation of cement-reinforced road foundations made of debris
VSN 182-91: Standards for Road Construction Material Surveying and the Design and Development of Near-Road Quarries for Road and Highway Construction
VSN 184-75: Technical guidelines for the installation of pavement bases made of stone materials, not reinforced and fortified with inorganic binders
VSN 185-75: Technical Guidelines for Roadbed and Pavement Construction Using Fly Ash and Ash-Slag Mixtures of Residue from Combustion of Various Types of Solid Fuels
VSN 31-83: Execution Requirements for Concrete Work for Construction of Hydraulic Structures
VSN 34-91/MT-st: Execution and Acceptance Requirements for New Construction, Rehabilitation, and Expansion of Existing Marine and River Hydraulic Transport Structures. Part I: Part II: Part III
VSN 56-97: Design and Basic Principles for Technology for Production of Fiber Reinforced Concrete Structures
VSN 7-89: Guidelines for the Construction, Repair, and Maintenance of Gravel Pavements
VSN-1-90: Technological rules for the manufacture of centrifuged racks of contact network supports, communication lines and self-locking
VSP 02.01.32/Russian Defense Ministry: Rules for the production and acceptance of work in the construction of aerodromes of the Armed Forces of the Russian Federation
VSP 103-97: Steel Fiber Reinforced Concrete Enclosures for Secure Spaces in Russian Federation Central Bank Facilities. Execution, Quality Control, and Acceptance Requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
