GOST R 55596-2013

ГОСТ Р 55596-2013

District heating systems. Standard for the stress and seismic analysis

Сети тепловые. Нормы и методы расчета на прочность и сейсмические воздействия

Status: Effective - Introduced for the first time. IUS 7-2014

This standard applies to designed, newly manufactured and reconstructed: - steel pipelines of water heating networks with an operating pressure of up to 2.5 MPa and an operating temperature of up to 200 ° C inclusive, - steel steam lines with an operating pressure of up to 4.0 MPa and inclusive up to 250 ° C inclusive (category III, group 2) from the output gate valves of the heat source collectors or from the external walls of the heat source to the output gate valves of heat points (input nodes) of buildings and structures , - water heating networks of flexible steel corrugated pipes with a working pressure of up to 1.6 MPa inclusive and operating temperatures of up to 150 ° C inclusive, - water heating networks of flexible polymer pipes with a working pressure of up to 1.0 MPa inclusive and working temperature up to 95 ° C inclusive. This standard applies both to air heating networks (in canals, urban and intra-quarter tunnels, above-ground) and to heat networks trapped in the ground (channel-free)

Настоящий стандарт распространяется на проектируемые, вновь изготавливаемые и реконструируемые: - стальные трубопроводы водяных тепловых сетей с рабочим давлением до 2,5 МПа включительно и рабочей температурой до 200 °С включительно, - стальные паропроводы с рабочим давлением до 4,0 МПа включительно и рабочей температурой до 250 °С включительно (категория III, группа 2) от выходных запорных задвижек коллекторов источника теплоты или от наружных стен источника теплоты до выходных запорных задвижек тепловых пунктов (узлов вводов) зданий и сооружений, - трубопроводы водяных тепловых сетей из гибких стальных гофрированных труб с рабочим давлением до 1,6 МПа включительно и рабочей температурой до 150 °С включительно, - трубопроводы водяных тепловых сетей из гибких полимерных труб с рабочим давлением до 1,0 МПа включительно и рабочей температурой до 95 °С включительно. Настоящий стандарт распространяется как на воздушные тепловые сети (в каналах, городских и внутриквартальных тоннелях, надземные), так и на тепловые сети, защемленные в грунте (бесканальные)

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 82

Approved: Federal Agency for Technical Regulation and Metrology, 10/25/2013

SKU: RUSS73643

Price: $1,164.00




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 032/2013 TR CU. On safety of overpressure equipment » Regulations and standards (to 032/2013 TR CU) »

Standards for pipe fittings (TPA) » 8. Piping valves (TPA) design » 8.2 Calculations » 8.2.3 Design for seismic strength »

Standards for pipe fittings (TPA) » 8. Piping valves (TPA) design » 8.2 Calculations » 8.2.1 Strength calculations »

Standards for pipe fittings (TPA) » 3. Piping valves (TPA) standards for industries » 3.1 For energy » 3.1.2 For thermal power »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.01 Pipelines and their components in general »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.01 Pipelines and their components in general »


The Document References:

GOST 25.101-83: Strength calculation and testing. Representation of random loading of machine elements and structures and statistical evaluation of results

GOST 30732-2006: Steel pipes and shaped products with foamed polyurethane thermal insulation in protective sheath. Specifications.

GOST R 52857.1-2007: Vessels and apparatus. Norms and methods of strength calculation. General requirements

GOST R 52857.3-2007: Vessels and apparatus. Norms and methods of strength calculation. Reinforcement of openings in shells and heads under internal and external pressure. Strength calculation of shells and heads under external static loads on the nozzle

GOST R 52857.4-2007: Vessels and apparatus. Norms and methods of strength calculation. Stength and leak-tightness calculation of flange joints

GOST R 52857.9-2007: Vessels and apparatus. Norms and methods of strength calculation. Determination of stresses at nozzle-to-shell and head junctions under action of pressure and external loads on the nozzle

PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.

RD 10-249-98: Strength calculation norms for stationary boilers and steam and hot water pipelines.

RD 153-34.1-17.465-00: Methodological guidelines for the assessment of internal corrosion driving rat in heating systems.

RSN 60-86: Engineering survey for construction. Seismic micro zoning. Standards of works

RSN 65-87: Engineering survey for construction. Seismic micro zoning. Technical requirements for the performance of works

RSN 66-87: Engineering survey for construction. Technical requirements for the performance of geophysical works. Seismic exploration

SNiP 41-02-2003: Heat networks

SP 14.13330.2011: Construction in seismic regions.

SP 20.13330.2011: Loads and impacts

STO SA 03.003-2009: Vessels and apparatus. Norms and methods of strength calculation. Calculation of seismic effects

SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84

The Document is Referenced By:

SP 315.1325800.2017: Thermal networks laid in a ground. Design rules

Customers Who Viewed This Item Also Viewed:

Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $262.35
Locomotive and motor rolling stock. Requirements of fire safety
Language: English
Price: $305.50
Unified system of design documentation. Operational documents
Language: English
Price: $610.13
Unified system of design documentation. Rules for the implementation of operational documents
Language: English
Price: $752.72
Noise. Admissible levels of noise in houses and public buildings
Language: English
Price: $7.52
System of building design document. Pipelines. Symbols for presentation
Language: English
Price: $10.89
Electrical equipment for a.c. voltages from 1 to 750 kV. Requirements for dielectric strength of insulation
Language: English
Price: $267.30
Electrical articles. General requirement for environment mechanical stability
Language: English
Price: $28.20
Machines for the pulp and paper industry
Language: English
Price: $207.58
Unified system for design documentation. Rules for making exploitative documents
Language: English
Price: $183.15
Electrical insulation system. Thermal evalution and classification
Language: English
Price: $54.45
Fire hazard of textiles. Decorative textiles. Flammability test method and classification
Language: English
Price: $49.50
Loads and impacts
Language: English
Price: $338.40
Direct-acting safety valves. General specifications
Language: English
Price: $346.50
Technical regulations of Customs Union. On the safety of agricultural and forestry tractors and trailers
Language: English
Price: $98.40
Seamless cold-deformed pipes from alloys based on titanium. Specifications
Language: English
Price: $147.44
Flame arrestors and spark arrestors. General technical requirements. Test methods
Language: English
Price: $128.70
Production conditions analysis for product attestation
Language: English
Price: $285.18
Vibration. Technological equipment of pulp and paper production. Protection methods and means
Language: English
Price: $299.73
Steel. Methods of test and estimation of macrostructure
Language: English
Price: $148.50

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!