imgalt

GOST R 56064-2014

ГОСТ Р 56064-2014

Safety of attractions. Capital repair of attractions. Procedure

Безопасность аттракционов. Капитальный ремонт аттракционов. Порядок проведения

Status: Effective - Introduced for the first time. IUS 4-2015

This standard contains the basic organizational and technical requirements for the procedure and establishes the rules for overhauling mechanized rides, and is intended for the preparation of repair production, product repair, and quality control of the repairs made. Requirements of this standard are mandatory for all legal entities and individual entrepreneurs - owners (tenants) of attractions, as well as enterprises and organizations engaged in the overhaul of mechanized attractions, and organizations that develop documents for their repair. The requirements of this standard do not apply to construction sites, foundations, permanent stands, construction walkways, animal maintenance devices, shooting galleries, inflatable attractions (trampolines), simple children's equipment and gaming machines using tokens, equipment for zoos, cinemas, theaters, circuses, sports facilities, playgrounds, casino equipment, bowling and other similar devices, swimming pools, water parks, aquariums and oceanariums, cable cars and lifts, elevators, exercise equipment, karting, boats Including motor, road and air transport facilities. The requirements of this standard can be used when carrying out work on the overhaul of other similar attractions not directly mentioned in it.

Настоящий стандарт содержит основные организационные и технические требования к процедуре и устанавливает правила проведения капитального ремонта механизированных аттракцио��ов, и предназначен для подготовки ремонтного производства, ремонта изделий, а также контроля качества произведенного ремонта. Требования настоящего стандарта обязательны для всех юридических лиц и индивидуальных предпринимателей - владельцев (арендаторов) аттракционов, а также предприятий и организаций, осуществляющих работы по проведению капитального ремонта механизированных аттракционов, и организаций, разрабатывающих документы по их ремонту. Требования настоящего стандарта не распространяются на строительные объекты, фундаменты, постоянные трибуны, строительные мостки, устройства для содержания животных, тиры, надувные аттракционы (батуты), простое детское оборудование и игровые автоматы, использующие жетоны, оборудование для зоопарков, кинотеатры, театры, цирки, спортивные сооружения, детские площадки, оборудование для казино, боулинги и иные аналогичные устройства, бассейны, аквапарки, аквариумы и океанариумы, канатные дороги и подъемники, лифты, тренажеры, картинги, лодки, в том числе моторные, авто- и авиатранспортные средства. Требования настоящего стандарта могут быть использованы при проведении работ по капитальному ремонту других подобных, непосредственно не упомянутых в нем, аттракционов

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 7/9/2014

SKU: RUSS73647

Price: $637.00



imgalt

The Product is Contained in the Following Classifiers:

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » V Social Security » 2 Safety requirements » 2.6 Safety at home »

ISO classifier » 97 HOUSEHOLD APPLIANCES AND TRADE EQUIPMENT. RECREATION. SPORT » 97.200 Equipment for recreation » 97.200.40 Playgrounds »

National standards » 97 HOUSEHOLD APPLIANCES AND TRADE EQUIPMENT. RECREATION. SPORT » 97.200 Equipment for recreation » 97.200.40 Playgrounds »

National Standards for KGS (State Standards Classification) » Latest edition » U Products of cultural and domestic purposes » U5 Equipment, inventory and accessories of theatrical and entertainment enterprises » U57 Amusement rides »


The Document References:

GOST 10197-70: Stands and supports for measuring heads. Specifications

GOST 10277-90: Putties. Specifications

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10-88: Inside micrometers. Specifications

GOST 10905-86: Surface plates and face-plates. Specifications

GOST 15.601-98: System of product development and launching into manufacture. Industrial products maintenance. Principal positions

GOST 162-90: Depth gauges. Specifications

GOST 166-89: Vernier callipers. Specifications

GOST 18322-78: Equipment maintenance and repair system. Terms and definitions

GOST 2.101-68: Unified system for design documentation. Types of items

GOST 2.102-2013: Unified system for design documentation. Types and sets of design documentation

GOST 2.602-2013: Unified system for design documentation. Repair documents

GOST 20911-89: Technical diagnostics. Terms and definitions

GOST 23343-78: Primer ГФ-0119. Specifications

GOST 25129-82: Primer GF-031. Specifications

GOST 25706-83: Magnifiers

GOST 3749-77: Checking 90° squares. Specifications

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 520-2011: Roll bearings. General specifications.

GOST 5378-88: Vernier protractors. Specifications

GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications

GOST 6507-90: Micrometers. Specifications

GOST 7470-92: Micrometric depth meters. Specifications

GOST 7502-98: Measuring metal tapes. Specifications

GOST 8026-92: Levelling rules. Specifications

GOST 868-82: Internal dial gauges graduated in 0,01 mm. Specifications

GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions

GOST 9038-90: Gauge blocks. Specifications

GOST 9087-81: Welding melted fluxes

GOST 9109-81: Primers ФЛ-03k and ФЛ-03Ж. Specifications

GOST 9244-75: Inside callipers graduated in 0,001 and 0,002 mm. Specifications

GOST 9378-93: Roughness comparison specimens

GOST 9696-82: Multi-revolution dial indicators graduated in 0,001 and 0,002 mm. Types. Basic parameters. Specifications

GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods

GOST R 27.002-2009: Dependability in technics. Terms and definitions

GOST R 50895-96: Toothed clutches. Specifications

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Tight and slack wooden barrels
Language: English
Price: $349.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Construction in seismic regions
Language: English
Price: $553.00
imgalt
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English
Price: $1,851.79
imgalt
Software for measuring instruments. Procedure for of certification. General provisions
Language: English
Price: $356.86
imgalt
Current transformers. General specifications
Language: English
Price: $715.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!