GOST 28668-90
ГОСТ 28668-90
|
|
Low-voltage switchgear and control gear assemblies. Part 1. Requirements for type-tested and partially type-tested assemblies
Низковольтные комплектные устройства распределения и управления. Часть 1. Требования к устройствам, испытанным полностью или частично
Status: Effective - Introduced for the first time. IUS 12-1990
The standard applies to low-voltage complete distribution and control devices (NKU) that have undergone type tests (PI NKU) and partially tested (CHI NKU), the rated voltage of which does not exceed 1000 V AC with a frequency of not more than 1000 Hz or 1500 V DC, intended for export. The standard also applies to TCU containing control and
Стандарт распространяется на низковольтные комплектные устройства распределения и управления (НКУ), прошедшие типовые испытания (ПИ НКУ) и частично испытанные (ЧИ НКУ), номинальное напряжение которых не превышает 1000 В переменного тока частотой не более 1000 Гц или 1500 В постоянного тока, предназначенные для экспорта. Стандарт также распространяется на НКУ, содержащие управляющие и/или силовые устройства, работающие при более высоких частотах. В этом случае действуют соответствующие дополнительные требования. Стандарт распространяется на стационарные и передвижные НКУ в защищенном или открытом исполнении.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Product Quality and Standards Management,
9/27/1990
SKU: RUSS73678
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.130 Switching and control equipment »
29.130.20 Low-voltage switching equipment and control equipment »
National standards »
29 ELECTRICAL ENGINEERING »
29.130 Switching and control equipment »
29.130.20 Low-voltage switching equipment and control equipment »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.240 Power transmission networks and distribution networks »
29.240.30 Control equipment for electrical power systems »
National standards »
29 ELECTRICAL ENGINEERING »
29.240 Power transmission networks and distribution networks »
29.240.30 Control equipment for electrical power systems »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E1 Power plants, substations and distribution devices »
E17 Switchgears »
National Standards for OKSTU »
ELECTRICAL EQUIPMENT AND MATERIALS »
Complete devices for voltages up to 1000 V »
The Document References:
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 21991-89: Electrotechnical equipment. Standard directions of movement for actuators which control the operation of electrical apparatus
GOST 2327-89: Low-voltage switches, switch-disconnectors. General technical specifications
GOST 28312-89: Radioelectronic equipment, professional. Conventional graphic designations
GOST 29149-91: Colours of indicator lights and push-buttons
GOST 30331.2-95: Electrical installations of buildings. Part 3. General characteristics
GOST 30331.3-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against electric shock
GOST R 50462-92: Identification of conductors by colours or numerals
GOST R 50571.10-96: Electrical installations of buildings. Part 5. Selection and erection of electrical equipment. Chapter 54. Earthing arrangements and protective conductors
GOST R 50571.2-94: Electrical installations of buildings. Part 3. General characteristics
GOST R IEC 536-94: Classification of electrical and electronic equipment with regard to protection against electric shock
MEK 364-5-54: Electrical installations of buildings. Part 5. Selection and installation of electrical equipment. Chapter 54. Grounding Devices and Protective Conductors
The Document is Referenced By:
GOST 12.2.091-2012: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements
GOST 12.2.116-2004: Three- and four-roller plate-bending machines. Safety requirements
GOST 19734-80: Input control devices for residential and public buildings
GOST 21021-2000: Numerical control units. General technical requirements
GOST 22789-94: Low-voltage unitized devices
GOST 28668.1-91: Low-voltage switchgear and control gear assemblies. Part 2. Particular requirments for busbar trunking systems ( busways )
GOST 28845-90: Machines for long time strength creep, testing and relaxation of materials. General technical requirements
GOST 9413-78: Lighting panels for dwelling-houses. General specifications
GOST IEC 60439-4-2013: Low-voltage switchgear and control gear assemblies. Part 4. Particular requirements for assemblies for construction sites (ACS)
GOST IEC 60947-1-2014: Low-voltage distribution and control equipment. Part 1. General rules
GOST IEC 60947-4-3-2014: Low-voltage switchgear and controlgear. Part 4-3. Contactors and motor starters. AC semiconductor controllers and contactors for non-motor loads
GOST IEC 61921-2013: Power capacitors. Low-voltage power factor correction banks
GOST R 12.2.141-99: Occupational safety standards system. Surface drilling equipment. Safety requirements
GOST R 50030.1-2000: Low-voltage switchgear and controlgear. Part 1. General rules and test methods
GOST R 50030.1-92: Low-voltage switchgear and control gear. Part 1. General rules
GOST R 50030.7.2-2000: Low-voltage switchgeal and controlgear. Part 7. Ancillary equipment. Section 2. Protective conductor terminal blocks for copper conductors
GOST R 51350-99: Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements
GOST R 51706-2001: Ozonisation equipment. Safety requirements
GOST R 51778-2001: Distribution boards for industrial and social buildings. General specifications
MP 31-2019: The automated information and measurement system for commercial metering of electrical energy (AIIS KUE) of PJSC "Transneft" in the part of JSC "Transneft - Diascan" on the Scientific and Production Base. Verification method
MP 32-2019: Automated information and measuring system for commercial accounting of electric energy (AIIS KUE) of JSC Energy Sales Company (LLC Teplo-Wimm, LLC Vegetables of the South from 35 kV Substation Dalnaya). Verification Method
SP 256.1325800.2016: Electrical equipment of residential and public buildings. Rules of design and erection
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.