GOST 1516.2-76
ГОСТ 1516.2-76
|
|
Electrical equipment and installations for a. c. voltages 3 kV and higher. General test methods of electrical strength of insulation
Электрооборудование и электроустановки переменного тока на напряжения 3 кВ и выше. Общие методы испытаний электрической прочности изоляции
Status: Not effective - Superseded. IUS 7-1998
The standard applies to electrical equipment and electrical installations and their parts (hereinafter - electrical equipment) of alternating current of 50 Hz frequency, voltage class Z kV and above. The standard establishes general methods and test conditions for electrical equipment insulation and provides guidance on the processing of test results conducted by industrial frequency voltage, lightning and switching voltage pulses. The standard does not apply to electric cars.
Стандарт распространяется на электрооборудование и электроустановки и их части (в дальнейшем - электрооборудование) переменного тока частоты 50 Гц, классов напряжения З кВ и выше. Стандарт устанавливает общие методы и условия испытаний изоляции электрооборудования и содержит указания по обработке результатов испытаний, проводимых напряжением промышленной частоты, грозовым и коммутационным импульсами напряжения. Стандарт не распространяется на электрические машины.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of Standards of the Council of Ministers of the USSR,
12/6/1976
SKU: RUSS73697
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.10 Operation of electrical installations, electrical equipment and power tools »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.1 Electric machines, electrical equipment and materials »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.020 Electrical engineering in general »
National standards »
29 ELECTRICAL ENGINEERING »
29.020 Electrical engineering in general »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.080 Insulation »
National standards »
29 ELECTRICAL ENGINEERING »
29.080 Insulation »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E0 General rules and regulations for electrical and heat engineering »
E09 Test methods. Packaging. Marking »
National Standards for OKSTU »
ELECTRICAL EQUIPMENT AND MATERIALS »
Control methods (testing, analysis, measurements) »
The Document is Replaced With:
GOST 1516.2-97: Electrical equipment and installations for a.c. voltage 3 kV and higher. General methods of dielectric tests
The Document References:
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 1516.1-76: Electrical equipment for ac voltages of 3 to 500 kv
GOST 17512-82: Electric equipment and installations for 3 kV and higher. Measuring methods during high - voltage tests
The Document is Referenced By:
GOST 10693-81: Hermetic capacitor bushings designed for rated voltages 110 kv and more
GOST 12.2.007.4-75: Cabinets for switchgear and control gear and unitized transformer substations
GOST 12670-88: Porcelain disk insulators for contact systems of electrified railroads
GOST 1282-88: Capacitors for increasing power coefficient
GOST 13821-77: Single-operator rectifiers with falling external characteristics for arc welding. General specifications
GOST 14693-90: Unsealed metal-enclosed switchgear
GOST 14694-76: Metal-clad switchgears up to 10 kV. Test methods
GOST 14794-79: Concrete current-limiting
GOST 15957-70: Three-phase power oil transformers of general purpose, voltage class 220 kV. Specification
GOST 15963-79: Electrical articles for tropical application. General technical requirements and methods of testing
GOST 17717-79: Alternating-current load-break cutouts for voltages of 3 to 10 kv
GOST 18397-86: Ac high-voltage circuit breakers standard voltage 6-220 kv for frequent switching operations
GOST 19294-84: Low-power general-purpose transformers
GOST 1983-2001: Voltage transformers. General specifications
GOST 20074-83: Electrical equipment and installations. Method measurements of partial discharge characteristics
GOST 20690-75: Electrical equipment for a.c. voltage 750 kV. Requirements for electric strength of insulation
GOST 689-90: Disconnectors and ground-wires for alternating current with voltage over 1 000 v
GOST 7746-89: Current transformers. General specifications
GOST 8.216-88: State system for ensuring the uniformity of measurements. Voltage transformers. Verification methods
GOST 8008-75: Power transformers. Test methods of tap changing devices
GOST 8608-79: Porcelain pin support insulators for voltage above 1000 V. General specifications
GOST R 51097-97: Electromagnetic compatibility of technical equipment. Radiofrequency disturbances from insulator sets and line fittings. Limits and measuring methods
RD 34.03.603: Requirements of Use and Testing of Protection Means Used in Electrical Installations and Technical Requirements on Them
RD 34.20.663-87: Standard instruction for work under voltage on intermediate supports and in the spans of overhead power transmission lines with voltage of 220 - 750 kV
RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above
SO 34-38-20136-2005: General-purpose 630 kVA power oil transformers for voltage up to 35 kV. Specifications for capital repair
TU 16-674.073-86: Short circuit breakers of types KRN and KZ for voltage classes 35, 110, 150 and 220 KV
TU 34-38-20121-87: Oil inlets. General technical conditions for major repairs
TU 34-38-20216-84: Transformers (and autotransformers) power oil general purpose 110 - 330 kV. Technical conditions for major repairs
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
