GOST R 53195.5-2010
ГОСТ Р 53195.5-2010
|
|
Functional safety of building/erection safety-related systems. Part 5. Techniques and measures on risk reduction, estimation methods
Безопасность функциональная связанных с безопасностью зданий и сооружений систем. Часть 5. Меры по снижению риска, методы оценки
Status: Effective - Introduced for the first time. With early application right
This standard applies to the system-related safety of buildings and structures (hereinafter referred to as SBSA-systems), hardware (hereinafter referred to as AS) and / or software (hereinafter referred to as software), which are part of SBSA-systems or used for developing SBSA-systems within the scope of application GOST R 53195.1, GOST R 53195.2, GOST R 53195.3 and GOST R 53195.4. This standard is used in conjunction with GOST R 53195.1, GOST R 53195.2, GOST R 53195.3 and GOST R 53195.4. This standard establishes the basic methods / tools used to meet the requirements of GOST R 53195.3 and GOST R 53195.4, and methods of conformity assessment. This standard contains brief descriptions of the methods / tools recommended in GOST R 53195.3 and GOST R 53195.4 and used at different stages of the life cycles of CBSMS systems, their speakers and software to reduce risks, as well as links to sources with a full description of these methods / tools. This standard does not apply to single SBZS-systems capable of carrying out the necessary risk reduction and required safety integrity which is lower than the lowest safety integrity level (SIL1) defined in tables 1 and 2 of GOST R 53195.2. It also does not apply to buildings and structures equipped with such systems or having no safety-related systems.
Настоящий стандарт распространяется на связанные с безопасностью зданий и сооружений системы (далее - СБЗС-системы), аппаратные средства (далее - АС) и/или программное обеспечение (далее - ПО), являющиеся частями СБЗС-системы либо используемые для разработки СБЗС-систем в рамках областей применения ГОСТ Р 53195.1, ГОСТ Р 53195.2, ГОСТ Р 53195.3 и ГОСТ Р 53195.4. Настоящий стандарт применяется совместно с ГОСТ Р 53195.1, ГОСТ Р 53195.2, ГОСТ Р 53195.3 и ГОСТ Р 53195.4. Настоящий стандарт устанавливает основные методы/средства, используемые для выполнения требований ГОСТ Р 53195.3 и ГОСТ Р 53195.4, и методы оценки соответствия. Настоящий стандарт содержит краткие описания методов/средств, рекомендуемых в ГОСТ Р 53195.3 и ГОСТ Р 53195.4 и применяемых на различных стадиях жизненных циклов СБЗС-систем, их АС и ПО для снижения рисков, а также ссылки на источники с полным описанием этих методов/средств. Настоящий стандарт не распространяется на одиночные СБЗС-системы, способные осуществить необходимое снижение риска и требуемая полнота безопасности которых ниже самого низкого уровнем полноты безопасности (SIL1), определенного в таблицах 1 и 2 ГОСТ Р 53195.2. Он не распространяется также на здания и сооружения, оснащенные такими системами или не имеющие никаких связанных с безопасностью систем
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/21/2010
SKU: RUSS73713
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.4 Ensuring safety of communications in enterprise »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.1 Electric machines, electrical equipment and materials »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.110 Safety of machinery »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.110 Safety of machinery »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.01 Fire protection in general »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.01 Fire protection in general »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.310 Crime protection »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.310 Crime protection »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.320 Alarm and warning systems »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.320 Alarm and warning systems »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.130 Switching and control equipment »
29.130.20 Low-voltage switching equipment and control equipment »
National standards »
29 ELECTRICAL ENGINEERING »
29.130 Switching and control equipment »
29.130.20 Low-voltage switching equipment and control equipment »
ISO classifier »
35 INFORMATION TECHNOLOGIES. OFFICE MACHINES »
35.240 Application of information technology »
National standards »
35 INFORMATION TECHNOLOGIES. OFFICE MACHINES »
35.240 Application of information technology »
ISO classifier »
35 INFORMATION TECHNOLOGIES. OFFICE MACHINES »
35.240 Application of information technology »
35.240.01 Application of information technology in general »
National standards »
35 INFORMATION TECHNOLOGIES. OFFICE MACHINES »
35.240 Application of information technology »
35.240.01 Application of information technology in general »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 13661-92: Electromagnetic compatibility of technical equipment. Passive filters and elements for interference suppression. Methods of inserted damping measuring
GOST 16962.2-90: Electrotechnical product
GOST 27.310-95: Dependability in techniques. Failure mode, effects and criticality analysis. Basic principles
GOST 30382-95: Electromagnetic compatibility of technical means. Throttles for interference suppression. General specifications
GOST 34.602-89: Information technology. Set of standards for automated systems. Technical directions for automated system making
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 51700-2000: Electromagnetic compatibility of technical equipment. Technical equipment intended for connection to symmetrical lines. Parameters of unbalance about earth. Measuring arrangements
GOST R 51901.11-2005: Risk management. Hazard and operability studies. Application guide
GOST R 51901.14-2007: Risk management. Reliability block diagram and Boolean methods
GOST R 51904-2002: Embedded system software. General requirements to development and documentation
GOST R 53195.1-2008: Functional safety of building/erection safety-related systems. Part 1. General
GOST R 53195.2-2008: Functional safety of building/erection safety-related systems. Part 2. General requirements
GOST R 53195.3-2009: Function safety of building/erection safety related systems. Part 3. Requirements for systems
GOST R 53195.4-2010: Functional safety of building/erection safety-related systems. Part 4. Software requirements
GOST R IEC 61160-2006: Risk management. Formal design review
GOST R ISO 10006-2005: Quality management systems. Guidelines for quality management in projects
GOST R ISO 9000-2008: Quality management systems. Fundamentals and vocabulary
GOST R ISO 9001-2008: Quality management systems. Requirements
GOST R ISO/IEC 16085-2007: Risk management. Application for system and software life cycle processes
The Document is Referenced By:
GOST R 22.9.11-2013: Safety in emergencies. Emergency and rescue systems for rescue from high-rise
GOST R 53195.3-2015: Functional safety of building/erection safety-related systems. Part 3. Requirements for systems
GOST R 53195.4-2010: Functional safety of building/erection safety-related systems. Part 4. Software requirements
SP 134.13330.2012: Telecommunication systems of buildings and facilities. Design basic provisions
SP 267.1325800.2016: High rise buildings and complexes. Design rules
SP 332.1325800.2017: Sport constructions. Rules of design
SP 383.1325800.2018: Facilities for sports and health. Desing rules
SP 457.1325800.2019: Sports facilities for cycling. Design rules
SP 457.1325800.2019: Sports facilities for cycling. Design rules
SP 459.1325800.2019: Sports facilities for rowing sports. Design rules
|
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
