GOST R 53580-2009
ГОСТ Р 53580-2009
|
|
Steel pipes for crafts pipelines. Specifications
Трубы стальные для промысловых трубопроводов. Технические условия
Status: Not effective - Canceled. Registration information 141-st dated 05.06.2013 (Rosstandart official website)
This standard applies to seamless and welded steel pipes and establishes requirements for pipes for field pipelines of the oil and gas industry, operated at temperatures up to minus 60 degrees C
Настоящий стандарт распространяется на бесшовные и сварные стальные трубы и устанавливает требования к трубам для промысловых трубопроводов нефтяной и газовой промышленности, эксплуатируемых при температуре до минус 60 град.С
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/15/2009
SKU: RUSS73742
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Welding materials »
Welding regulations »
Welding staff »
Welding regulations »
Admission Testing »
Welding regulations »
Certification »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Manual welding »
Welding regulations »
Welding work »
Mechanized welding »
Welding regulations »
Welding work »
Automatic welding »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Electrodes »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.4 Iron and steel products »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.75 Steel pipes and tubes for special purposes »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.75 Steel pipes and tubes for special purposes »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V6 Pipes metal and pipe products »
V62 Steel pipes and their connecting parts »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10006-80: Metal pipes
GOST 10692-80: Steel and cast iron pipes and fittings. Rules for acceptance of marking, packing, transportation and storage
GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum
GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen
GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron
GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium
GOST 1497-84: Metals. Methods of tension test
GOST 17745-90: Steels and alloys. Methods for determination of gases
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium
GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium
GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium
GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite
GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur
GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus
GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon
GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese
GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium
GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper
GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel
GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis
GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid
GOST 3728-78: Tubes. Method of bend-over test
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 8695-75: Tubing (pipes). Flattening testing method
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 53364-2009: Steel pipes, tubes and pipe products. Inspection documents
GOST R ISO 10124-99: Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes. Ultrasonic testing for the detection of laminar imperfections
GOST R ISO 10543-99: Seamless and hot-stretch-reduced welded steel tubes for pressure purposes. Ultrasonic thickness testing
PB 03-273-99: Rules for qualification test of welders and welding production specialists
PB 03-440-02: Attestation rules for nondestructive inspection personnel
RD 03-495-02: Procedures for the qualification test of welders and welding work specialists
RD 03-615-03: Order of welding technologies application at engineering devices production, installation, repair and reconstruction for unsafe industrial objects.
The Document is Referenced By:
GOST 31443-2012: Steel pipes for crafts pipelines. Specifications
GOST R 55990-2014: Oil and gas-oil fields. Field pipelines. Design codes
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.