GOST R 51350-99
ГОСТ Р 51350-99
|
|
Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements
Безопасность электрических контрольно-измерительных приборов и лабораторного оборудования. Часть 1. Общие требования
Status: Not effective - Canceled. Registration information 1041-st dated November 22, 2012 (official website of Rosstandart); IUS 12-2013
This standard establishes the general safety requirements for electrical instrumentation and laboratory equipment. For certain types of this equipment, safety requirements are supplemented or modified by special requirements of private standards. The private standard should be used in conjunction with this standard.
Настоящий стандарт устанавливает общие требования безопасности к электрическим контрольно-измерительным приборам и лабораторному оборудованию. Для определенных типов этого оборудования требования безопасности дополнены или изменены специальными требованиями частных стандартов. Частный стандарт следует применять совместно с настоящим стандартом
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
10/29/1999
SKU: RUSS73772
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
19 Tests »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.1 Basic requirements for instruments and test equipment »
ISO classifier »
19 TESTS »
19.020 Conditions and test procedures in general »
National standards »
19 TESTS »
19.020 Conditions and test procedures in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P0 General rules and regulations for instrument-making industry »
P07 Safety »
National Standards for OKSTU »
GENERAL PURPOSE INSTRUMENTS AND AUTOMATION »
National Standards for OKSTU »
GENERAL PURPOSE INSTRUMENTS AND AUTOMATION »
Rules for acceptance, use, operation and repair. Safety engineering »
National Standards for OKSTU »
SPECIAL PURPOSE INSTRUMENTS AND AUTOMATION »
National Standards for OKSTU »
SPECIAL PURPOSE INSTRUMENTS AND AUTOMATION »
Rules for acceptance, use, operation and repair. Safety engineering »
National Standards for OKSTU »
WIRED COMMUNICATIONS AND RADIO COMMUNICATIONS TERMINAL AND INTERMEDIATE »
Radio measuring devices »
National Standards for OKSTU »
MEDICAL EQUIPMENT »
National Standards for OKSTU »
MEDICAL EQUIPMENT »
Rules for acceptance, use, operation and repair. Safety engineering »
The Document References:
GOST 12.1.001-89: Occupational safety standards system. Ultrasound. General safety requirements
GOST 12.1.006-84: Occupational safety standards system. Electromagnetic fields of radio frequencies. Permissible levels at work-places and requirements for control
GOST 12.4.026-76: Signal colors and safety signs
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 17187-81: Noise meters
GOST 22782.0-81: Explosion-proof electrical equipment
GOST 22782.4-78: Explosion-proof electrical apparatus. Pressurized enclosure. Technical requirements and methods of testing
GOST 22782.5-78: Explosion proof electrical apparatus with the type of protection «intrinsically-safe electrical circuit». Technical requirements and test methods
GOST 22782.6-81: Explosion proof electrical apparatus. Flameproof enclosure. Technical requirements and Test methods.
GOST 22782.7-81: Explosion-proof electric equipment with "e" type protection
GOST 27473-87: Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions
GOST 28668-90: Low-voltage switchgear and control gear assemblies. Part 1. Requirements for type-tested and partially type-tested assemblies
GOST 30030-93: Isolating transformers and safety isolating transformers. Technical requirements
GOST 30331.1-95: Electrical installations of buildings. General
GOST 30331.2-95: Electrical installations of buildings. Part 3. General characteristics
GOST 30331.3-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against electric shock
GOST 30331.4-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against thermal effects
GOST 30331.5-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against overcurrent
GOST 30331.6-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against undervoltage
GOST 30331.8-95: Electrical installations of buildings. Part 4. Protection for safety. Applisation of protective measues for safety. Measures of protection against electric shock
GOST 30530-97: Noise. Methods for calculation of limit admissible nose characteristics of stationary machines.
GOST 8865-93: Electrical insulation system. Thermal evalution and classification
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
GOST R 50030.2-99: Low-voltage switchgear and controlgear. Part 2. Circuit-breakers
GOST R 50571.7-94: Electrical installations of buildings. Part 4. Protection for safety. Isolation, switching off, control
GOST R 50571.9-94: Electrical installations of buildings. Part 4. Security requirements. Application of overcurrent protection measures
GOST R 51321.1-2000: Low-voltage switchgear and controlgear assemblies. Part 1. Requirements for type-tested and partially type-tested assemblies. General technical requirements and methods of tests
GOST R 51325.1-99: Appliance couplers for household and similar general purposes. Requirements and methods of tests
GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements
GOST R 51330.10-99: Electrical apparatus for explosive gas atmospheres. Part 11. Spark-free power line, type i
GOST R 51330.1-99: Electrical apparatus for explosive gas atmospheres. Part 1. Construction and verification test of flameproof enclosures of electrical apparatus
GOST R 51330.3-99: Explosion protected electrical equipment. Part 2. Filling or purging of the pressurized enclosure P
GOST R 51330.6-99: Electrical apparatus for explosive gas atmospheres. Part 5. Quartz filling of q-shell
GOST R 51330.7-99: Explosion-proof electrical apparatus. Part 6. Oil-filled "o" enclosures
GOST R 51330.8-99: Explosionproof electrical apparatus. Part 7. Type e protection.
NRB 96: Radiation Safety Standards
OSP-72/87: Basic sanitary rules for working with radioactive substances and other sources of ionizing radiation
SanPiN 2.2.2.542-96: Hygienic requirements to videodisplay terminals, personal electronic computers and work organization. Sanitary rules and norms
SN 2.2.4/2.1.8.562-96: Noise exposure in work environment, residential premises, premises of public buildings and in dwellings zones
SN 2.2.4/2.1.8.566-96: Industrial vibration. Vibration in premises of residential and public buildings
The Document is Referenced By:
GOST 13033-84: Gsp. Electrical analog equipment and means for automation
GOST 13384-93: Measuring transducers for thermoelectric transducers and resistance thermo-transducers. General technical requirements and methods of tests
GOST 13418-79: Automation facilities and discrete electric devices of ssf
GOST 14014-91: Digital instruments and measuring transducers of voltage, current and resistance
GOST 22261-94: Measuring instruments for electrical
GOST 25086-2011: Non-ferrous metals and their alloys. General requirements for methods of analysis
GOST 27300-87: Information measuring systems. General requirements, complete set and rules of operation documentation composition
GOST 28271-89: Portable radiometric and dosimetrical instruments. General technical requirements and test methods
GOST 28814-90: Integrated circuits. Methods of measuring electrical parameters of pulse voltage regulators operation circuits
GOST 30012.1-2002: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 1. Definitions and general requirements common to all parts
GOST 30591-97: Services. Repair and maintenance of household electric appliances and equipment. General specifications
GOST 31382-2009: Copper. Methods of analysis
GOST 31598-2012: Steam large sterilizers. General technical requirements and test methods
GOST 32221-2013: Copper concentrates. Methods of analysis
GOST 32698-2014: Rail fastening. Safety requirements and methods of control
GOST 8.237-2003: State system for ensuring the uniformity of measurements. Single-value electrical resistance measures. Verification procedure
GOST 8.616-2013: State system for ensuring the uniformity of measurements. Laboratory and stream chromatographs for control of component composition Liquefied hydrocarbon fuel gases. The method of verification
GOST R 50267.0-92: Medical electrical equipment. Part 1. General safety requirements
GOST R 50444-92: Medical instruments, apparatus and equipment. General specifications
GOST R 50571.16-2007: Low-voltage electrical installations. Part 6. Tests
GOST R 50938-2013: Consumer services. Repair, installation and maintenance electric cars and devices. General specifications
GOST R 51060-97: Instruments for measurement of optical average power of fibre optics transmission systems. General technical requirements
GOST R 51288-99: Means for measuring electric and magnetic quantities. Exploitation documents
GOST R 51649-2000: Heat meters for water heat supply systems. General specifications
GOST R 51837-2001: Electrical thermal equipment. General test methods
GOST R 51935-2002: Steam large sterilizers. General technical requirements and test methods
GOST R 52319-2005: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements
GOST R 52320-2005: Electricity metering equipment (а.с). General requirements. Tests and test conditions. Part 11. Meters for electric energy
GOST R 52456-2005: Global navigation satellite system and global position system. Individual receiver equipment for automobile transport. Technical requirements
GOST R 52536-2006: Automatic equipment for spectrum monitoring stations. Technical requirements and test methods
GOST R 53333-2008: Electric energy. Electromagnetic compatibility of technical equipment. Electric energy quality control in the public power supply systems
GOST R 53367-2009: Combustible natural gas. Determination of sulphur-containing components using chromatographic method
GOST R 53734.5.1-2009: Electrostatics. Protection of electronic devices from electrostatics phenomena. General requirements
GOST R 54115-2010: Global navigation satellite system. General-purpose rolling stock receiver. Technical requirements
GOST R 54459-2011: Global navigation satellite systems. Differential correction systems. General technical requirements
GOST R 54460-2011: Global navigation satellite systems. System of monitoring and integrity control. General technical requirements and test methods
GOST R 54484-2011: Liquefied hydrocarbon fuel gases. Method for determination of hydrocarbon composition
GOST R 54960-2012: Gas distribution systems. Block gas delivery stations. Cabinet gas delivery stations. General technical requirements
GOST R 55230-2012: Marine, locomotive and industrial engines. Fire protection requirements
GOST R 55992.1-2014: In vitro diagnostic medical devices for fluorescent and immunofluorescent analysis of «dried spot» of newborn’s blood. Part 1. Instruments and accessories for fluorescent and immunofluorescent analysis of «dried spot» of newborn’s blood. Technical requirements for state to buy in
GOST R 57186-2016: Intelligent transportation system. Highway state control and accounting. Functions, structure and characteristics on-board navigation and communication equipment for road machines
GOST R 8.583-2001: State system for ensuring the uniformity of measurements. Medical ultrasonic therapeutic equipment. General requirements for measurement procedures of the acoustic output performance in the frequency range from 0,5 MHz to 5,0 MHz
GOST R 8.754-2011: State system for ensuring the uniformity of measurements. Analysers of oxygen dissolved in water. Verification procedure
GOST R 8.832-2013: State system for ensuring the uniformity of measurements. State verification system for measuring equipment of AC industrial voltage from 1 to 500 kV
GOST R 8.877-2014: The state system of measurement assurance. Measures of electromotive force (standard cells) and measures of direct electrical voltage. Methods of verification
GOST R EN 13060-2011: Small steam sterilizers
GOST R IEC 60601-2-22-2008: Medical electrical equipment. Part 2-22: Particular requirements for the basic safety and essential performance of surgical, cosmetic, therapeutic and laser equipment
GOST R IEC 61010-2-010-99: Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-010. Particular requirements for laboratory equipment for the heating of materials
GOST R IEC 61010-2-020-99: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-020. Particular requirements for laboratory centrifuges
GOST R IEC 61010-2-031-99: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-031. Particular requirements for hand-held probe assemblies for electrical measurement and test
GOST R IEC 61010-2-032-99: Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for hand-held current clamps for electrical measurement and test
GOST R IEC 61010-2-051-99: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-051. Particular requirements for laboratory equipment for mixing and stirring
GOST R IEC 61010-2-061-99: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-061. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
GOST R IEC 61069-7-2012: Industrial process measurement and control. Evaluation of system properties for the purpose of system assessment. Part 7. Assessment of system safety
GOST R IEC 61557-3-2006: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 3. Loop impedance
GOST R IEC 61557-4-2007: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 4. Resistance of earth connection and equipotential bonding
GOST R IEC 61557-5-2008: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 5. Resistance to earth
GOST R IEC 61557-6-2009: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 6. Residual current operated protective devices in TT and TN systems
GOST R IEC 61587-1-2013: Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297. Part 1. Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis
GOST R ISO 11134-2000: Sterilization of health care products. Requirements for validation and routine control. Industrial moist heat sterilization
GOST R ISO 13683-2000: Sterilization of health care products. Requirements for validation and routine control of moist heat sterilization in health care facilities
MI 2728-2002: State system for ensuring uniformity of measurements. The list of regulatory documents on security requirements. The order of their application in the normative documents of the ICE
MI 2845-2003: State system for ensuring uniformity of measurements. Measuring voltage transformers 6
MI 2925-2005: Measuring voltage transformers 35… 330
MI 2982-2006: Recommendation. State system for ensuring uniformity of measurements. Voltage transformers measuring from 500/square root of 3 to 750/square root of 3 kV. On-site verification method
MI 3022-2006: Recommendation. State system for ensuring uniformity of measurements. Normalization of the load of the secondary circuits of measuring current transformers
MI 3023-2006: Recommendation. State system for ensuring uniformity of measurements. Normalization of the load of the secondary circuits of measuring voltage transformers
MI 3050-2007: State system for ensuring uniformity of measurements. Voltage transformers measuring. Methods of on-site verification using PVE voltage converters
MI 3261-2010: State system for ensuring the uniformity of measurements. Means of measuring the concentration of dissolved oxygen in water. Methods of verification
MI 3269-2010: Recommendation. State system for ensuring uniformity of measurements. Construction, presentation, design and content of documents on methods (methods) of measurement
MI 3314-2011: State system for ensuring uniformity of measurements. Measuring voltage transformers 220
MI 4212-012-2001: Recommendation. State system for ensuring uniformity of measurements. Sensors (measuring transducers) pressure type "METRAN". Verification Method
MR 1.2.0022-11: Sampling procedure for nanomaterials control
MU 1.2.2740-10: Sampling procedure for identifying, identifying and characterizing the action of nanomaterials in aquatic invertebrates
MU 1.2.2741-10: Sampling procedure for the identification and identification of nanomaterials in laboratory animals
MU 1.2.2744-10: Sampling procedure for the identification and identification of nanomaterials in fish
MU 1.2.2745-10: Sampling procedure for characterizing the action of nanomaterials on laboratory animals
ODM 218.2.032-2013: Guidelines for accounting for the movement of vehicles on highways
OST 45.191-2002: Average power meters of optical radiation for fiber-optic transmission systems. Technical requirements. Test methods
OST 45.192-2002: Measuring radiation sources for fiber-optic transmission systems. Technical requirements. Test methods
ST RK GOST R 52320-2009: AC electricity metering equipment. General requirements for testing and testing conditions. Part 11. Meters for electric energy
STB GOST R 52320-2007: Equipment for measurement of alternating current of electrical power. General requirements. Tests and test conditions. Part 11. Electrical power recorders
|
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
