GOST R 51326.1-99
ГОСТ Р 51326.1-99
|
|
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's). Part 1. General requirements and test methods
Выключатели автоматические, управляемые дифференциальным током, бытового и аналогичного назначения без встроенной защиты от сверхтоков. Часть 1. Общие требования и методы испытаний
Status: Effective - Introduced for the first time. for imported products, 01.01.2001 for newly developed and modernized products, 01.01.2002 for manufactured products; IUS 2-2000
This standard applies to differential current-controlled circuit breakers without built-in overcurrent protection, functionally independent or voltage-dependent, for household and similar applications with rated voltages not exceeding 440 V AC and rated currents not exceeding 125 A, used mainly for protection against electric shock
Настоящий стандарт распространяется на управляемые дифференциальным током автоматические выключатели без встроенной защиты от сверхтоков, функционально независящие или зависящие от напряжения сети, бытового и аналогичного применения с номинальными напряжениями, не превышающими 440 В переменного тока, и номинальными токами, не превышающими 125 А, применяемые главным образом для защиты от поражения электрическим током
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
11/30/1999
SKU: RUSS73790
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
004/2011 TR CU. About safety of low voltage equipment »
Regulations and standards (to TR CU 004/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
020/2011 TR CU. Electromagnetic compatibility of technical means »
Regulations and standards (to ТР ТС ТС 020/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.1 Electric machines, electrical equipment and materials »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.120 Electrical fittings »
National standards »
29 ELECTRICAL ENGINEERING »
29.120 Electrical fittings »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.120 Electrical fittings »
29.120.01 Electrical fittings in general »
National standards »
29 ELECTRICAL ENGINEERING »
29.120 Electrical fittings »
29.120.01 Electrical fittings in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E7 Electrical apparatus and fittings »
E71 Devices with voltage up to 1000 V »
The Document References:
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15543.1-89: Electrical articles. General requirements for environmental climatic aspects stability
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 17516.1-90: Electrical articles. General requirement for environment mechanical stability
GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods
GOST 24753-81: Contact terminals of electrical equipment
GOST 27.003-90: Reliability in engineering. Make-up and general rules for assigning reliability requirements
GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability
GOST 27483-87: Fire hazard testing. Test methods. Glow-wire test and guidance
GOST 28214-89: Basic environmental testing procedures. Part 2: Tests. Guidance for damp heat tests
GOST 28216-89: Basic environmental testing procedures. Part 2. Tests. Test Db and guidance: damp heat, cyclic (12 + 12 hour cycle)
GOST 28312-89: Radioelectronic equipment, professional. Conventional graphic designations
GOST 29322-92: Standard voltages
GOST 30012.1-2002: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 1. Definitions and general requirements common to all parts
GOST 30331.4-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against thermal effects
GOST 30331.5-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against overcurrent
GOST 9.005-72: Unified system of corrosion and ageing protection. Metals, alloys, metallic and non-metallic coatings. Permissible and impermissible contacts with metals and non-metals
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 50345-92: Circuit-breakers for overcurrent protection for household and similar installations
GOST R 50345-99: Electrical accessories. Circuit-breakers for overcurrent protection for household and similar installations
GOST R 50571.1-2009: Low-voltage electrical installations. Part 1. Fundamental principles, assessment of general characteristics and definitions
GOST R 50571.19-2000: Electrical installations of buildings. Part 4. Protection for safety. Chapter 44. Protection against overvoltages. Section 443. Protection against overvoltages of atmospheric origin or due to switching
GOST R 50807-95: Residual current operated protective devices. General requirements and test methods
GOST R 51318.14.1-2006: Electromagnetic compatibility of technical equipment. Household appliances, electric tools and similar apparatus. Radio disturbance. Limits and methods of measurements
GOST R 51318.14.1-99: Electromagnetic compatibility of technical equipment. Radio disturbance from household appliances, electric tools and similar apparatus. Limits and test methods
GOST R 51322.1-99: Plugs and socket-outlets for household and similar purposes. Part 1. Requirements and methods of tests
GOST R 51326.2.1-99: Residual current operated circuit-breakers without integral overcurrent protection for house and similar uses (RCCB's). Part 2-1. Applicability of the general rules to RCCB's functionally independent of line voltage
GOST R 51326.2.2-99: Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's). Part 2-2. Applicability of the general rules to RCCB's functionally dependent on line voltage
GOST R 51327.1-99: Residual current operated circuit-pressers with integral overcurrent protection for household and similar use. Part 1. General requirements and test methods
GOST R 51328-99: Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs). General requirements and test methods
GOST R 51329-99: Electromagnetic compatibility of technical equipment. Residual current-operated protective devices (RCDs) for household and similar use. Requirements and test methods
The Document is Referenced By:
GOST 30988.2.6-2012: Plugs and socket-outlets for household and similar purposes. Part 2-6. Particular requirements for switched socket-outlets with interlock for fixed electrical installations and methods of tests
GOST R 50030.2-2010: Low-voltage switchgear and control gear. Part 2. Circuit-breakers
GOST R 50030.2-99: Low-voltage switchgear and controlgear. Part 2. Circuit-breakers
GOST R 50345-2010: Electrical accessories. Circuit-breakers for overcurrent protection for household and similar installations. Part 2. Circuit-breakers for a.c. operation
GOST R 50571.17-2000: Electrical installations of buildings. Part 4. Protection for safety. Chapter 48. Choice of protective measures as a function of external influences. Section 482. Protection against fire
GOST R 50571.25-2001: Electrical installations of buildings. Part 7. Requirements for special installations. Electrical installations of buildings and structures with electrical heating of floors and surfaces
GOST R 50571.27-2003: Electrical installations of buildings. Part 7-740. Requirements for special installations or locations. Temporary electrical installations for structures, amusement devices and booths at fairgrounds, amusement parks and circuses
GOST R 50571.5.53-2013: Low-voltage electrical installations. Part 5-53. Selection and erection of electrical equipment. Isolation, switching and control
GOST R 51322.2.6-99: Plugs and socket-outlets for household and similar purposes. Part 2-6. Particular requirements for switched socket-outlets with interlock for fixed electrical installations and methods of tests
GOST R 51326.2.1-99: Residual current operated circuit-breakers without integral overcurrent protection for house and similar uses (RCCB's). Part 2-1. Applicability of the general rules to RCCB's functionally independent of line voltage
GOST R 51327.1-2010: Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs). Part 1. General rules and test methods
GOST R 51327.1-99: Residual current operated circuit-pressers with integral overcurrent protection for household and similar use. Part 1. General requirements and test methods
GOST R 51328-99: Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs). General requirements and test methods
GOST R 51329-2013: Electromagnetic compatibility of technical equipment. Residual current-operated protective devices (RCDs) for household and similar use. Requirements and test methods
GOST R 51329-99: Electromagnetic compatibility of technical equipment. Residual current-operated protective devices (RCDs) for household and similar use. Requirements and test methods
GOST R 51628-2000: Distribution boards for dwelling-houses. General specifications
GOST R 51992-2002: Surge protective devices connected to low-voltage power distribution systems. Part 1. Performance requirements and testing methods
GOST R 53312-2009: Devices of protective shutdown. Fire safety requirements. Test methods
GOST R 54127-6-2012: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 6. Residual current operated protective devices in TT, TN and IT systems
GOST R 54392-2011: Electrical installations of livestock building. Methods of potential equalization
GOST R 56124.5-2014: Renewable power engineering. Small renewable energy and hybrid systems for rural electrification. Recommendations. Part 5. Protection against electrical hazards
GOST R 56978-2016: Photovoltaic arrays. Specifications
GOST R IEC 61643-12-2011: Low-voltage surge protective devices. Part 12. Surge protective devices connected to low-voltage power distribution systems. Selection and application principles
GOST R IEC 61851-1-2013: Electric vehicle conductive charging system. Part 1. General requirements
GOST R IEC 62040-1-1-2009: Uninterruptible power systems (UPS). Part 1-1. General and safety requirements for UPS used in operator access areas
Order 1317: The list of documents in the field of standardization, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured
Order 1573: The list of national standards and sets of rules, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured
Order 832: The list of documents in the field of standardization, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured
SP 423.1325800.2018: Electrical installations low-voltage buildings and structures. Explosion hazard design guidelines
STB GOST R 51322.2.6-2003: Electric plug connectors for household and similar purpose. Part 2-6. Additional requirements to sockets with circuit-breaker with lockout devices for fixed installations and test methods
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
