GOST R 55260.3.1-2013
ГОСТ Р 55260.3.1-2013
|
|
Hydro power plants. Part 3-1. Hydraulic turbines. Procurement specification
Гидроэлектростанции. Часть 3-1. Гидротурбины. Технические требования к поставке
Status: Effective - Introduced for the first time. IUS 2-2015
The object of regulation of this standard are hydraulic turbines of vertical and horizontal design and the conditions of their delivery. This standard is intended for use in the design, manufacture, ordering, delivery, acceptance, installation and commissioning of hydro turbine installations for hydraulic and pumped storage power plants in terms of meeting the requirements for their parameters, design, materials, delivery conditions, acceptance and commissioning, ensuring safe, reliable and efficient operation of the equipment supplied. This standard applies to: - hydroturbine installations with impellers of the following types: 1) rotary vane; 2) propeller; 3) radial-axial; - reversible hydraulic units; - automatic control system of a hydro turbine unit
Объектом регулирования настоящего стандарта являются гидротурбинные установки вертикального и горизонтального исполнения и условия их поставки. Настоящий стандарт предназначен для применения при проектировании, изготовлении, заказе, поставке, приемке, монтаже и пуске в эксплуатацию гидротурбинных установок для гидравлических и гидроаккумулирующих электростанций в части реализации требований к их параметрам, конструкции, материалам, условиям поставки, приемке и вводу в эксплуатацию, обеспечивающих безопасную, надежную и эффективную эксплуатацию поставляемого оборудования. Настоящий стандарт распространяется на: - гидротурбинные установки с рабочими колесами следующих типов: 1) поворотно-лопастные; 2) пропеллерные; 3) радиально-осевые; - обратимые гидроагрегаты; - систему автоматического управления гидротурбинной установки
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
9/6/2013
SKU: RUSS73815
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
27 Power and heat engineering »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
4 Safety requirements for hydraulic structures »
4.3 Hydraulic structures of power facilities »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.140 Hydropower »
National standards »
27 ENERGY AND HEATING TECHNOLOGY »
27.140 Hydropower »
The Document is Replaced With:
GOST R 55260.3.1-2020: Hydroelectric power plants. Hydro turbines. Delivery specifications
The Document References:
Federal Law 18-FZ: Charter of railway transport of the Russian Federation
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.007.1-75: Occupation safety standards system. Rotating electric machines. Safety requirements
GOST 12.2.049-80: Occupational safety standards system. Industrial equipment. General ergonomic requirements
GOST 12.2.062-81: Occupational safety standards system. Industrial equipment. Safety protectors
GOST 12.4.040-78: Industrial equipment controls
GOST 12405-81: Electric-hydraulic controllers for hydraulic turbines
GOST 12969-67: Plates for machines and devices. Technical requirements
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 14192-96: Cargo marking
GOST 15.005-86: Creation of articles manufactured individually or in small batches and assembled at the place of operation
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15467-79: Product quality control. Basic concepts. Terms and definitions
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 19431-84: Power and electrification. Terms and definitions
GOST 2.314-68: Unified system for design documentation. Instructions for marking and stamping articles
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2.602-95: Unified system for design documentation. Repair documents
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 23956-80: Hydraulic turbines. Terms and definitions
GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions
GOST 27528-87: Kaplan. Francis exial flow vertical shaft hydraulic tyrbines. Basic parameters
GOST 27807-88: Hydraulic vertical turbines
GOST 3062-80: One lay rope type ЛК-О construction 1x7 (1+6). Dimensions
GOST 3282-74: General-purpose low-carbon steel wire. Specifications
GOST 4.425-86: Product-quality index system. Hydraulic turbines. Index nomenclature
GOST 4.427-86: Product-quality index system. Equipment of hydraulic turbines. Index nomenclature
GOST 5616-89: Water-wheel electrical generators and motor-generators
GOST 8339-84: Oil pressure installations for hydraulic turbines
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST R 55562-2013: Hydraulic turbines, storage pumps and pump-turbines. Cavitation pitting evaluation. Part 1. Evaluation in reaction turbines, storage pumps and pump-turbines
GOST R 55621-2013: Guide for procurement of power station equipment. Part 5-4. Turbines-hydraulic turbines, storage pumps and pump-turbines
Order 116: Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities where equipment operating under excessive pressure is used"
Order 116: On the approval of the Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities using equipment operating under excessive pressure" (as amended on December 12, 2017) (canceled from 01.01.2021 on the basis of the Decree of the Government of the Russian Federation dated 06.08.2020 N 1192)
PB 03-576-03: Regulations of design and safe operation of pressure vessels
POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations
RD 34.03.204: Safety rules when working with tools and accessories
SN 2.2.4/2.1.8.566-96: Industrial vibration. Vibration in premises of residential and public buildings
SO 153-34.20.501-03: Rules for the technical operation of power plants and networks of the Russian Federation
SP 33-101-2003: Determination of design hydrological performance
SP 58.13330.2012: Hydraulic Structures. Basic statements
The Document is Referenced By:
GOST R 58224-2018: Hydraulic power plants. Rates of the petroleum products losses in the exploitation process of the hydraulic turbine equipment. Method of turbine oil loss calculation in hydraulic turbine equipment operation
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.