imgalt

GOST R 55892-2013

ГОСТ Р 55892-2013

Objects of low-tonnage liquefied natural gas production and consumption. General technical requirements

Объекты малотоннажного производства и потребления сжиженного природного газа. Общие технические требования

Status: Effective - Introduced for the first time. IUS 7-2014

This standard establishes the general requirements for the design, construction, installation, reconstruction and operation of newly commissioned and reconstructed facilities of low-tonnage production and consumption of liquefied natural gas intended to change the state of aggregation of natural gas (liquefaction and re-gasification) with the amount of liquefied natural gas at the facility not exceeding 200 tons, with a unit volume of a cryogenic tank not exceeding 260 m3, and with an overpressure in cryogenic tanks not exceeding 0.8 MP but. This standard applies to: - complexes for the production of liquefied natural gas with a capacity of up to 10 tons of liquefied natural gas per hour, which are located at gas filling stations, gas distribution and compressor stations of main gas pipelines; - at the station for the production of liquefied natural gas with a capacity of up to 10 tons of liquefied natural gas per hour, located on main gas pipelines, as well as in the fields for the extraction of hydrocarbons; - at a consumer refueling station with liquefied natural gas (cryogenic gas filling stations) or regasified liquefied natural gas with a pressure of over 0.6 MPa (cryogenic gas filling stations), including at cryogenic stations for refueling natural gas of motor vehicles, automotive and tractor equipment, railway, water, air transport ; - at the station for supplying consumers with regasified liquefied natural gas with a pressure of up to 0.6 MPa inclusive (cryogenic gas supply stations), including at the station supplying utility and heat and power facilities

Настоящий стандарт устанавливает общие требования к проектированию, строительству, монтажу, реконструкции и эксплуатации вновь вводимых и реконструированных объектов малотоннажного производства и потребления сжиженного природного газа, предназначенных для изменения агрегатного состояния природного газа (сжижение и регазификация) с количеством сжиженного природного газа на объекте, не превышающим 200 тонн, при единичном объеме криогенного резервуара, не превышающим 260 м3, и с избыточным давлением в криогенных резервуарах не более 0,8 МПа. Настоящий стандарт распространяется: - на комплексы производства сжиженного природного газа производительностью до 10 тонн сжиженного природного газа в час, которые расположены на автомобильных газонаполнительных компрессорных станциях, на газораспределительных и компрессорных станциях магистральных газопроводов; - на станции производства сжиженного природного газа производительностью до 10 тонн сжиженного природного газа в час, расположенные на магистральных газопроводах, а также на промыслах по добыче углеводородов; - на станции заправки потребителей сжиженным природным газом (криогенные газозаправочные станции) или регазифицированным сжиженным природным газом давлением свыше 0,6 МПа (криогенные газонаполнительные станции), в том числе на криогенные станции заправки природным газом автотранспорта, автотракторной техники, железнодорожного, водного, авиационного транспорта; - на станции снабжения потребителей регазифицированным сжиженным природным газом давлением до 0,6 МПа включительно (криогенные станции газоснабжения), в том числе на станции снабжения коммунально-бытовых и теплоэнергетических объектов

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 12/17/2013

SKU: RUSS73827

Price: $322.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 13 Environmental protection, protection of people from environmental exposure. Security »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.220 Fire protection » 13.220.01 Fire protection in general »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.220 Fire protection » 13.220.01 Fire protection in general »


The Document References:

Code 190-FZ: Town Planning Code of the Russian Federation

Federal Law 315-FZ: About self-regulatory organizations

Federal Law 99-FZ: On licensing certain types of activities

GOST 12.0.004-90: Organization of training for labor safety. General rules

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.2.085-2002: Vessels working under pressure. Safety valves. Safety requirements

GOST 12.4.124-83: Occupational safety standards system. Means of static electricity protection. General technical requirements

GOST 14202-69: Pipe-lines of industrial plants. Identification coloring, safety signs and marking screens

GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 24.104-85: Unified system of standards of computer control systems. Computer control systems. General requirements

GOST 26633-91: Heavy-weight and sand concretes. Specifications

GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection

GOST 9293-74: Gaseous and liquid nitrogen. Specifications

GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods

GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection

GOST R 52289-2004: Traffic control devices. Rules of application of traffic signs, markings, traffic lights, guardrails and delineators

GOST R 52290-2004: Traffic control devices. Traffic signs. General technical requirements

GOST R 53323-2009: Flame arrestors and spark arrestors. General technical requirements. Test methods

GOST R 53324-2009: Dyking of storage tanks. Fire safety requirements

GOST R 53521-2009: Natural gas processing. Terms and definitions

GOST R 54808-2011: Pipeline valves. Leakage rates of valves.

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 03-582-03: Design and Safety Operation Regulations for Reciprocating Compressor Operating with Explosive and Hazard Gases

PB 09-540-03: General codes on explosion protection for explosive and fire hazardous chemical, petrochemical plants and oil refineries

RD 03-19-2007: Regulations on the organization of work on the training and certification of specialists of organizations supervised by the Federal Service for Environmental, Technological and Atomic Supervision

RD 03-20-2007: Regulations on the organization of training and knowledge testing of workers of organizations supervised by the Federal Service for Environmental, Technological and Atomic Supervision

RD 09-364-00: Safety Instructions for hot works in hazardous and explosive areas.

RD 09-536-03: Methodical Instructions on the Order of Development of the Emergency Situations Localization and Liquidation Plan (ESLLP) at Chemical-Engineering Facilities

RD 34.21.122-87: Manual for installation of the lightning protection of buildings and structures

RD 78.36.003-2002/MVD Rossii: Engineering and technical strength. Security equipment. Requirements and design standards for the protection of objects from criminal attacks

Resolution 1371: Rules for registration of facilities in the state register of hazardous production facilities

Resolution 246: Regulations on the implementation of federal state metrological supervision

Resolution 87: The list of names of communication services included in the license for the implementation of activities in the field of rendering communication services

Resolution 87: Regulations on the composition of sections of design documentation and requirements for their content

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

SanPiN 2.1.7.1322-03: Hygienic requirements regarding dumping and decontamination of industrial and consumable waste

SanPiN 2.2.1/2.1.1.1200-03: Sanitary-protective zones and sanitary classification of enterprises, constructions and other objects

SO 153-34.21.122-2003: Instruction on lightning protection for buildings, constructions and industrial communications

SP 124.13330.2012: Heating networks

SP 18.13330.2011: Master plans for industrial enterprises

SP 30.13330.2012: Domestic water supply and sewerage of buildings.

SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants

SP 36.13330.2012: Trunk pipelines

SP 43.13330.2012: Structures for industrial installations

SP 56.13330.2011: Industrial buildings

SP 60.13330.2012: Heating, Ventilation and Air Conditioning (HVAC). Updated living edition of SNiP 41-01-2003

SP 61.13330.2012: Designing of thermal insulation of equipment and pipe lines

TOI R-112-17-95: Standard Safety Guidelines for Hazardous Operations Involving Gas at Petroleum Product Supply Facilities

VNTP 51-1-88: Industry norms of technological design of Installations for Production and Storage of Liquefied Natural Gas, Isothermal Storages and Gas Filling Stations

The Document is Referenced By:

GOST R 56851-2016: Liquefied natural gas. Method for calculation of thermodynamic properties

SP 326.1311500.2017: Objects of low-tonnage liquefied natural gas production and consumption. Fire safety requirements

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!