imgalt

GOST R 52319-2005

ГОСТ Р 52319-2005

Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements

Безопасность электрического оборудования для измерения, управления и лабораторного применения. Часть 1. Общие требования

Status: Not effective - Canceled. IUS 12-2013

This standard establishes the general safety requirements for electrical equipment, including embedded computing devices used in professional activities in the industrial and educational sectors. The purpose of the requirements of this standard is to ensure that during the development and in the applied methods of designing equipment, the operator and the environment are adequately protected from: electrical shock or burns; mechanical hazards; high temperature; spreading fire from equipment; exposure to liquids, including liquids under pressure; radiation exposure, including laser sources, sound pressure and ultrasound; emitted gases, explosions, including inward explosions. This standard does not establish requirements for: reliability of operation, performance and other non-safety equipment properties; packaging efficiency during transportation; electromagnetic compatibility; protective measures in an explosive atmosphere; service (repair); protection of maintenance (repair) personnel

Настоящий стандарт устанавливает общие требования безопасности электрического оборудования, в том числе встроенных вычислительных устройств, применяемого в профессиональной деятельности, в отраслях промышленности и области образования. Назначение требований настоящего стандарта - обеспечить, чтобы при разработке и в применяемых методах конструирования оборудования была предусмотрена достаточная защита оператора и окружающей среды от: поражения электрическим током или от ожога; механических опасностей; высокой температуры; распространения огня из оборудования; воздействия жидкостей, в том числе жидкостей под давлением; воздействия излучений, включая источники лазера, давления звука и ультразвука; выделяющихся газов, взрывов, в том числе взрывов, направленных внутрь. Настоящий стандарт не устанавливает требования к: надежности функционирования, рабочим характеристикам и другим свойствам оборудования, не связанным с безопасностью; эффективности упаковки при транспортировании; электромагнитной совместимости; мерам защиты во взрывоопасной атмосфере; обслуживанию (ремонту); защите обслуживающего (ремонтного) персонала

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 3/10/2005

SKU: RUSS73848

Price: $1,494.00


National keywords: барьер; безопасность; влажные условия; врубное оборудование; высокая защищенность; двойная изоляция; дополнительная изоляция; доступность; загрязнение; зазор; защитное соединение; защитный импеданс; измерение; инструмент; испытание типа; клемма; клемма защитного проводника; клемма рабочего заземления; кожух; контроль; лабораторное использование; номинальное напряжение; нормальное применение; нормальные условия; общие требования; опасное для жизни; опасность; оператор; основная изоляция; ответственный орган; переносное оборудование; перечень номинальных параметров; постоянно подключенное оборудование; приемосдаточное испытание; путь утечки; рабочее напряжение; ручное оборудование; сетевая цепь; сеть; стационарное оборудование; степень загрязнения 1; степень загрязнения 2; степень загрязнения 3; усиленная изоляция; условие единичной неисправности; электрооборудование;

imgalt

The Product is Contained in the Following Classifiers:

Evidence base (TR CU, Technical Regulation of the Customs Union) » 004/2011 TR CU. About safety of low voltage equipment » Regulations and standards (to TR CU 004/2011) »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.2 Operation of production machines and equipment »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 3 Activities of testing laboratories » 3.2 Technical equipment of testing laboratories » 3.2.2 Measuring instruments and test equipment » 3.2.2.1 Basic requirements for instruments and test equipment »

ISO classifier » 11 HEALTH » 11.080 Sterilization and disinfection »

National standards » 11 HEALTH » 11.080 Sterilization and disinfection »

ISO classifier » 11 HEALTH » 11.080 Sterilization and disinfection » 11.080.01 Sterilization and disinfection in general »

National standards » 11 HEALTH » 11.080 Sterilization and disinfection » 11.080.01 Sterilization and disinfection in general »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.060 Measurements of volume, mass, density, viscosity »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.060 Measurements of volume, mass, density, viscosity »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.080 Measurements of time, speed, acceleration, angular velocity »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.080 Measurements of time, speed, acceleration, angular velocity »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.100 Measurement of force, weight and pressure »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.100 Measurement of force, weight and pressure »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.120 Measurement of fluid flow parameters »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.120 Measurement of fluid flow parameters »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.120 Measurement of fluid flow parameters » 17.120.01 Measurement of parameters of fluid flow in general »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.120 Measurement of fluid flow parameters » 17.120.01 Measurement of parameters of fluid flow in general »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.200 Thermodynamics and Temperature Measurements » 17.200.20 Temperature measuring instruments »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.200 Thermodynamics and Temperature Measurements » 17.200.20 Temperature measuring instruments »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.220 Electricity. Magnetism. Electrical and magnetic measurements »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.220 Electricity. Magnetism. Electrical and magnetic measurements »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.220 Electricity. Magnetism. Electrical and magnetic measurements » 17.220.01 Electricity. Magnetism. General aspects »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.220 Electricity. Magnetism. Electrical and magnetic measurements » 17.220.01 Electricity. Magnetism. General aspects »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.220 Electricity. Magnetism. Electrical and magnetic measurements » 17.220.20 Measurement of electrical and magnetic quantities »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.220 Electricity. Magnetism. Electrical and magnetic measurements » 17.220.20 Measurement of electrical and magnetic quantities »

National Standards for KGS (State Standards Classification) » Latest edition » P Measuring devices. Automation and computing facilities » P0 General rules and regulations for instrument-making industry » P07 Safety »


The Document References:

GOST 14254-96: Degrees of protection provided by enclosures (IP Code)

GOST 15088-83: Plastics. Method of determination of the Vicat softening temperature of thermoplastics

GOST 27473-87: Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions

GOST 30012.1-2002: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 1. Definitions and general requirements common to all parts

GOST 30324.0-95: Medical electrical equipment. Part 1. General safety requirements

GOST 30331.1-95: Electrical installations of buildings. General

GOST 30331.2-95: Electrical installations of buildings. Part 3. General characteristics

GOST 30331.3-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against electric shock

GOST 30331.4-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against thermal effects

GOST 30331.5-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against overcurrent

GOST 30331.6-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against undervoltage

GOST 30331.8-95: Electrical installations of buildings. Part 4. Protection for safety. Applisation of protective measues for safety. Measures of protection against electric shock

GOST 30457-97: Acoustics. Determination of sound power levels of noise sources using sound intensity. Measurement at discrete points. Engineering method

GOST 6570-96: Electrical induction active and reactive energy meters

GOST 8.417-2002: State system for ensuring the uniformity of measurements. Units of quantities

GOST 8865-93: Electrical insulation system. Thermal evalution and classification

GOST R 1.0-92: State system for standardization of the Russian Federation. Basic principles

GOST R 1.2-92: State system for standardization of the Russian Federation. Procedure for developing state standards

GOST R 1.5-2004: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of structure, drafting, presentation and indication

GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods

GOST R 50030.1-2000: Low-voltage switchgear and controlgear. Part 1. General rules and test methods

GOST R 50030.3-99: Low -voltage switchgear and controlgear. Pat 3. Switchers, disconnectors, switch-disconnectors and fure-combination units

GOST R 50537-93: Miniature fuses. Definitions for miniature fuses and general requirements for miniature fuse-links

GOST R 50571.18-2000: Electrical installations of buildings. Part 4. Protection for safety. Chapter 44. Protection against overvoltages. Section 442. Protection of low-voltage installations against faults between high-voltage systems and earth

GOST R 50571.19-2000: Electrical installations of buildings. Part 4. Protection for safety. Chapter 44. Protection against overvoltages. Section 443. Protection against overvoltages of atmospheric origin or due to switching

GOST R 50571.2-94: Electrical installations of buildings. Part 3. General characteristics

GOST R 50571.7-94: Electrical installations of buildings. Part 4. Protection for safety. Isolation, switching off, control

GOST R 50571.9-94: Electrical installations of buildings. Part 4. Security requirements. Application of overcurrent protection measures

GOST R 50695-94: Methods of test for the determination of the flammability of solid electrical insulating materials when exposed to an igniting source

GOST R 50723-94: Laser safety. General requirements for development and operation the laser products

GOST R 50948-2001: Display means for individual use. General ergonomic requirements and safety requirements

GOST R 50949-2001: Display means for individual use. Methods of measurement and assessment of ergonomic and safety parameters

GOST R 51321.1-2000: Low-voltage switchgear and controlgear assemblies. Part 1. Requirements for type-tested and partially type-tested assemblies. General technical requirements and methods of tests

GOST R 51323.1-99: Plugs, socket-outlets and couplers for industrial purposes. Part 1. General requirements

GOST R 51323.2-99: Plugs, socket-outlets and couplers for industrial purposes. Part 2. Dimensional interchangeability requirements for pin and contact-tube accessories

GOST R 51323.3-99: Plugs, socket-outlets and couplers for industrial purposes. Part 3. Particular requirements for plugs, socket-outlets, connectors and appliance inlets for use in explosive gas atmospheres

GOST R 51325.1-99: Appliance couplers for household and similar general purposes. Requirements and methods of tests

GOST R 51325.2.2-99: Appliance couplers for household and similar general purposes. Part 2-2. Particular requirements for interconnection couplers for household and similar equipment. Requirements and methods of tests

GOST R 51325.2.3-2002: Appliance couplers for household and similar general purposes. Part 2-3. Particular requirements for appliance couplers with a degree of protection higher than IPXO and methods of tests

GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements

GOST R 51330.10-99: Electrical apparatus for explosive gas atmospheres. Part 11. Spark-free power line, type i

GOST R 51330.11-99: Explosion-proof electrical equipment. Part 12. Classification of mixtures of gases and vapors with air for safe experimental maximum gaps and minimum flammable currents

GOST R 51330.12-99: Electrical apparatus for explosive gas atmospheres. Part 13. Construction and use of rooms or buildings protected by pressurization

GOST R 51330.13-99: Explosion protected electrical apparatus. Part 14. Electrical installations in explosive gas environments (other than mines)

GOST R 51330.14-99: Electrical apparatus for explosive gas atmospheres. Part 15. N type protection.

GOST R 51330.15-99: Electrical apparatus for explosive gas atmospheres. Part 16. Artificial ventilation for the protection of analyzer(s) houses

GOST R 51330.16-99: Explosion protected electrical apparatus. Part 17. Inspection and maintenance of electrical installations in hazardous areas (other than mines)

GOST R 51330.17-99: Explosion-protected electrical apparatus. Part 18. Type of protection (m)

GOST R 51330.18-99: Electrical apparatus for explosive gas atmospheres. Part 19. Repair and overhaul for apparatus used in explosive atmospheres (other than mines or explosives)

GOST R 51330.1-99: Electrical apparatus for explosive gas atmospheres. Part 1. Construction and verification test of flameproof enclosures of electrical apparatus

GOST R 51330.19-99: Electrical apparatus for explosive gas atmospheres. Part 20. Data for flammable gases and vapors relating to the use of electrical apparatus

GOST R 51330.20-99: Mining electrical equipment. Insulation, leakage paths and electrical gaps. Technical requirements and testing methods

GOST R 51330.2-99: Explosion-proof electrical equipment. Part 1. Explosion protection of the

GOST R 51330.3-99: Explosion protected electrical equipment. Part 2. Filling or purging of the pressurized enclosure P

GOST R 51330.4-99: Electrical apparatus for explosive gas atmospheres. Part 3. Spark-test devices for spark-safe cirсuits

GOST R 51330.5-99: Explosion-proof electrical equipment. Part 4. Method for determining the self-ignition temperature

GOST R 51330.6-99: Electrical apparatus for explosive gas atmospheres. Part 5. Quartz filling of q-shell

GOST R 51330.7-99: Explosion-proof electrical apparatus. Part 6. Oil-filled "o" enclosures

GOST R 51330.8-99: Explosionproof electrical apparatus. Part 7. Type e protection.

GOST R 51330.9-99: Electrical apparatus for explosive gas atmospheres. Volume 10. Classification of hazardous areas

GOST R 51350-99: Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements

GOST R 51362-99: Dry-cleaning machines. Graphical symbols for use on equipment

GOST R 51402-99: Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane

GOST R 51522-99: Electromagnetic compatibility of technical equipment. Electrical equipment for measurement, control and laboratory use. Requirements and test methods

GOST R 52161.1-2004: Safety of household and similar electrical appliances. Part 1. General requirements

GOST R IEC 227-7-98: Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Screened and unscreened flexible cables with two or more conductors

GOST R IEC 245-5-97: Rubber insulated cables of rated voltages up and including 450/750 V. Lift cables

GOST R IEC 60065-2002: Audio-, video- and similar electronic apparatus. Safety requirements

GOST R IEC 60127-1-2005: Miniature fuses. Part 1. Definitions for miniature fuses and general requirements for miniature fuse-links

GOST R IEC 60204-1-99: Safety of machinery. Electrical equipment of machines. Part 1. General requirements

GOST R IEC 60227-1-99: Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. General requirements

GOST R IEC 60227-2-99: Polyvinylchloride insulated cables of rated voltages up to and including 450/750 V. Part 2. Test methods

GOST R IEC 60227-3-2002: Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring

GOST R IEC 60227-4-2002: PVC-insulated cables for rated voltage up to and including 450/750 V. Sheathed cables for fixed installation

GOST R IEC 60227-5-2002: Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Flexible cables (cords)

GOST R IEC 60227-6-2002: Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Lift cables and cables for flexible connections

GOST R IEC 60227-7-98: Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 7. Screened and unscreened flexible cables with two or more conductors

GOST R IEC 60245-1-97: Rubber insulated cables of rated voltages to 450/750 V including. General requirements

GOST R IEC 60245-2-2002: Rubber insulated cables of rated voltages up to and including 450/750 V. Test methods

GOST R IEC 60245-3-97: Rubber insulated cables of rated voltages to 450/750 V including. Heat resistant silicone insulated cables

GOST R IEC 60245-4-2002: Rubber insulated cables of rated voltages up to and including 450/750 V. Cords and flexible cables

GOST R IEC 60245-5-97: Rubber insulated cables of rated voltages to 450/750 V including. Part 5. Lift cables

GOST R IEC 60245-6-97: Rubber insulated cables of rated voltages to 450/750 V including. Arc welding electrode cables

GOST R IEC 60245-7-97: Rubber insulated cables of rated voltages to 450/750 V including. Heat-resistant ethylene-vinyl acetate rubber insulated cables

GOST R IEC 60245-8-2002: Rubber insulated cables of rated voltages up to and including 450/750 V. Cords for applications requiring high flexibility

GOST R IEC 60335-2-35-2000: Safety of household and similar electrical appliances. Particular requirements for instantaneous water heaters and test methods

GOST R IEC 60335-2-41-98: Safety of household and similar electrical appliances. Particular requirements for pumps and test methods

GOST R IEC 60447-2000: Man-machine interface. Actuating principles

GOST R IEC 60799-2002: Electrical accessories. Cord sets and interconnection cord sets

GOST R IEC 60950-2002: Safety of information technology equipment

GOST R IEC 61010-2-010-99: Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-010. Particular requirements for laboratory equipment for the heating of materials

GOST R IEC 61010-2-020-99: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-020. Particular requirements for laboratory centrifuges

GOST R IEC 61010-2-031-99: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-031. Particular requirements for hand-held probe assemblies for electrical measurement and test

GOST R IEC 61010-2-032-99: Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for hand-held current clamps for electrical measurement and test

GOST R IEC 61010-2-041-99: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-041. Particular requirements for autoclaves using steam for the treatment of medical materials and for laboratory processes

GOST R IEC 61010-2-051-99: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-051. Particular requirements for laboratory equipment for mixing and stirring

GOST R IEC 61010-2-061-99: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-061. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization

GOST R IEC 61032-2000: Protection of persons and equipment by enclosures. Probes for verification

NRB 99: Radiation Safety Standards

Rules 2.6.1.758-99: Radiation safety standards (NRB-99)

SN 2.2.4/2.1.8.566-96: Industrial vibration. Vibration in premises of residential and public buildings

SP 2.6.1.799-99: Main sanitary regulations to ensure radiation safety

The Document is Referenced By:

GOST R 50444-92: Medical instruments, apparatus and equipment. General specifications

GOST R 52931-2008: Instruments for process monitoring and control. General specifications

GOST R 52932-2008: Electromagnetic, ultrasonic, vortex and fluid oscillator counters for water heat supply systems. General specifications

GOST R 53112-2008: Information protection. Facilities for measuring side electromagnetic radiation and pickup parameters. Technical requirements and test methods

GOST R 53704-2009: Complex and integrated security systems. General technical requirements

GOST R 53994.2.7-2010: Automatic electrical controls for household and similar use. Part 2.7. Particular requirements for timers and time switchers

GOST R 54127-1-2010: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 1. General requirements

GOST R 54127-2-2011: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 2. Insulation resistance

GOST R 54127-3-2011: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 3. Loop impedance

GOST R 54127-5-2011: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 5. Resistance to earth

GOST R 54127-6-2012: Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 6. Residual current operated protective devices in TT, TN and IT systems

GOST R 54906-2012: Complex security systems. Environmental security and ecological safety guaranteed design. General technical requirements

GOST R 55154-2012: Equipment mountain-mine. Systems of safety of the coal mines multifunctional. General technical requirements

GOST R 55232-2012: Fixed-wavelength photometric detectors used in liquid chromatography and flow-injection analysis. General technical requirements and test methods

GOST R 55614-2013: Non-destructive testing. Ultrasonic thickness gauges. General technical requirements

GOST R 55992.1-2014: In vitro diagnostic medical devices for fluorescent and immunofluorescent analysis of «dried spot» of newborn’s blood. Part 1. Instruments and accessories for fluorescent and immunofluorescent analysis of «dried spot» of newborn’s blood. Technical requirements for state to buy in

GOST R 55999-2014: In-line inspection of gas pipelines. General requirements

GOST R 8.656-2009: State system for ensuring the uniformity of measurements. Quality factors of electric power measuring instruments. Methods of verification

GOST R 8.689-2009: Quality factors of electric power measuring instruments. State system for ensuring the uniformity of measurements. Test methods and equipment.

GOST R 8.823-2013: State system for ensuring the uniformity of measurements. Meters for hot water. General metrological and technical requirements

GOST R EN 1010-1-2009: Printing machinery. Safety requirements for the design and construction. Part 1. General requirements

GOST R EN 13532-2010: General requirements for in vitro diagnostic medical devices for self-testing

GOST R EN 14180-2008: Sterilizers of the medical purpose. Low temperature steam and formaldehyde sterilizers. Requirements and tests

GOST R IEC 60127-1-2005: Miniature fuses. Part 1. Definitions for miniature fuses and general requirements for miniature fuse-links

GOST R IEC 61207-1-2009: Gas analysers. Expression of performance. Part 1. General

GOST R ISO 15197-2009: In vitro diagnostic test systems. Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus

GOST R ISO 17593-2009: Clinical laboratory testing and in vitro medical devices. Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy

GOST R ISO 22734-2-2014: Hydrogen generators using water electrolysis process. Part 2. Residential applications

IBJaL.413534.001 RJe: Carbon monoxide alarm SOU-1. Manual

PND F 13.1:2:3.19-98: Quantitative chemical analysis of atmospheric air and air emissions. Methods for measuring mass concentrations of nitrogen dioxide and nitric acid (total), nitric oxide, sulfur trioxide and sulfuric acid (total), sulfur dioxide, hydrogen chloride, hydrogen fluoride, orthophosphoric acid and ammonia in samples of industrial emissions, atmospheric air and air of the working area using the ion chromatography

PND F 16.1.8-98: Quantitative chemical analysis of soil. Methods for measuring the mass concentrations of nitrite, nitrate, chloride, fluoride, sulfate and phosphate ions in soil samples (water-soluble form) by ion chromatography

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $139.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
High strength rolled steel. General specification
Language: English
Price: $289.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!