GOST R 54928-2012
ГОСТ Р 54928-2012
|
|
Pedestrian bridges for polymer composites. Specifications
Пешеходные мосты и путепроводы из полимерных композитов. Технические условия
Status: Effective - Introduced for the first time. IUS 3-2015
This standard applies to supporting structures made by vacuum infusion technology and other structural elements of pedestrian bridges and overpasses (temporary and permanent) of polymer composites. This standard establishes the technical requirements for supporting structures made of polymer composites, manufactured by vacuum infusion technology and other structural elements of pedestrian bridges and overpasses (temporary and permanent) of polymer composites, requirements for polymer composites used in the manufacture of structural elements, requirements for methods control when determining the performance and characteristics of structural elements and polymer composites, as well as the general requirements for calculating s structural elements and polymer composites in the design of pedestrian bridges and overpasses. This standard is recommended for use by design organizations in the development of design documentation for the construction, repair and reconstruction of pedestrian bridges and overpasses using structures made of polymer composites manufactured using vacuum infusion technology, customers of construction, repair and reconstruction of pedestrian bridges and overpasses, construction organizations, organizations, control and acceptance of work, as well as organizations conducting tests, monitoring and operation pedestrian bridges and overpasses
Настоящий стандарт распространяется на несущие конструкции, изготавливаемые по технологии вакуумной инфузии и другие конструктивные элементы пешеходных мостов и путепроводов (временных и постоянных) из полимерных композитов. Настоящий стандарт устанавливает технические требования, предъявляемые к несущим конструкциям из полимерных композитов, изготавливаемым по технологии вакуумной инфузии и другим конструктивным элементам пешеходных мостов и путепроводов (временных и постоянных) из полимерных композитов, требования к полимерным композитам, применяемым при изготовлении конструктивных элементов, требования к методам контроля при определении показателей и характеристик конструктивных элементов и полимерных композитов, а также общие требования к расчетам конструктивных элементов и полимерных композитов при проектировании пешеходных мостов и путепроводов. Настоящий стандарт рекомендуется для использования проектными организациями при разработке проектной документации на строительство, ремонт и реконструкцию пешеходных мостов и путепроводов с применением конструкций из полимерных композитов, изготавливаемых по технологии вакуумной инфузии, заказчиками строительства, ремонта и реконструкции пешеходных мостов и путепроводов, строительными организациями, организациями, осуществляющими контроль и приёмку работ, а также организациями, проводящими испытания, мониторинг и эксплуатацию пешеходных мостов и путепроводов
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
6/27/2012
SKU: RUSS73879
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
93 Civil Engineering »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.120 Reinforced plastics »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.120 Reinforced plastics »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.040 Construction of bridges »
National standards »
93 CIVIL CONSTRUCTION »
93.040 Construction of bridges »
The Document References:
GOST 10060.0-95: Methods for the determination of frost-resistance. General requirements
GOST 10060.2-95: Concretes, rapid method for the determination of frost-resistance by repeated alternated freezing and thawing
GOST 11262-80: Plastics. Tensile strength test method.
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 13087-81: Concretes. Method of abrasion test
GOST 15139-69: Plastics. Methods for the determination of density (mass density)
GOST 15173-70: Plastics. Method for determination of mean coefficient of linear thermal expansion
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 23630.2-79: Plastics. Method for the determination of thermal conductivity.
GOST 24452-80: Concretes. Methods of prismatic compressive strengths, modulus of elasticity and Poisson ratio determination
GOST 24778-81: Plastics. Methods for shear strength determination in plane of the sheet
GOST 25.602-80: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperatures
GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements
GOST 30247.0-94: Elements of building constructions. Fire-resistance test methods. General requirements
GOST 30247.1-94: Elements of building constructions. Fire-resistance test methods. Load bearing and separating constructions
GOST 4648-71: Plastics. Method of static bending test
GOST 4650-80: Plastics. Methods for the determination of water absorption
GOST 4651-82: Plastics. Compression test method
GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance
GOST 9.708-83: Unified system of corrosion and ageing protection. Plastics. Ageing test methods on exposure to natural and artificial climatic factors
GOST 9550-81: Plastics. Methods for determination of elasticity modulus at strength, compression and bending
GOST R 50443-92: Prepress and premixes. Terms and definitions
GOST R 54257-2010: Reliability of the constructions and foundations. Basic principles and requirements
GOST R 54559-2011: Fibre reinforced thermosetting plastic pipes and parts of pipelines. Terms and definitions
SNiP 12-04-2002: Safety in construction. Part 2. Construction works
SNiP 2.09.03-85: Structures for industrial installations
SNiP 23-02-2003: Buildings Heat Insulation
SNiP 3.06.07-86: Bridges and Pipes. Rules for Inspection and Testing
SP 128.13330.2012: Aluminium structures
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
VSN 37-84: Guidelines for Traffic Control and Safety Barriers at Road Construction Sites
The Document is Referenced By:
GOST R 70313-2022: Public roads. Bridge structures. Rules for the arrangement of staircases and operating facilities
ODM 218.2.057-2015: Recommendations for use on bridges for drainage trays made of polymer composite materials
ODM 218.2.058-2019: Recommendations on the use of composite materials in the construction of bridge structures and pedestrian bridges
ODM 218.2.059-2015: Recommendations for use on bridges, viaducts and tunnels of pedestrian decking (pavements) made of composite materials
ODM 218.3.061-2015: Recommendations on the use of composite structures and materials with flammability parameters "NG" for transport infrastructure facilities
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Metals. Methods of tension test
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
