GOST R 51524-2012
ГОСТ Р 51524-2012
|
|
Electromagnetic compatibility of technical equipment. Adjustable speed electrical power drive systems. Part 3. EMC requirements and specific test methods
Совместимость технических средств электромагнитная. Системы электрического привода с регулируемой скоростью. Часть 3. Требования ЭМС и специальные методы испытаний
Status: Effective
This standard establishes the requirements of electromagnetic compatibility (EMC) for electric drive systems (EPS) in accordance with Definition 3.1, designed to regulate the speed of rotation of AC and DC electric motors. Requirements are established for FES with converters of input and / or output voltages of alternating current (line-to-line voltage) up to 35 kV (RMS). This standard applies to BOT, used in residential, commercial and industrial areas, with the exception of applications for electric traction and electric vehicles. BOT can be connected both to industrial electric networks, and to low-voltage electric networks of general purpose. Industrial networks are powered by separate distribution transformers, which are usually located near or inside the production area and feed only industrial consumers. Industrial networks can also be powered by their own electrical generating equipment.
Настоящий стандарт устанавливает требования электромагнитной совместимости (ЭMC) к системам электрического привода (СЭП) в соответствии с определением 3.1, предназначенным для регулирования скорости вращения электрических двигателей переменного и постоянного тока. Требования установлены к СЭП с преобразователями входного и/или выходного напряжений переменного тока (напряжение «линия - линия») до 35 кВ (среднеквадратическое значение). Настоящий стандарт распространяется на СЭП, применяемые в жилых, коммерческих и промышленных зонах, за исключением применений для электрической тяги и электрических транспортных средств. СЭП могут быть подключены как к промышленным электрическим сетям, так и к низковольтным электрическим сетям общего назначения. Промышленные сети получают питание от отдельных распределительных трансформаторов, которые обычно расположены около или внутри производственной зоны и питают только промышленных потребителей. Промышленные сети могут также получать питание от собственного электрического генерирующего оборудования
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/29/2011
SKU: RUSS73893
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
Construction (Max) »
Standards »
Other state standards used in construction »
33 Telecommunications. Audio and Video »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
020/2011 TR CU. Electromagnetic compatibility of technical means »
Regulations and standards (to ТР ТС ТС 020/2011) »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.200 Rectifiers. Converters. Stabilized power supplies »
National standards »
29 ELECTRICAL ENGINEERING »
29.200 Rectifiers. Converters. Stabilized power supplies »
ISO classifier »
33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT »
33.100 Electromagnetic Compatibility (EMS) »
National standards »
33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT »
33.100 Electromagnetic Compatibility (EMS) »
ISO classifier »
33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT »
33.100 Electromagnetic Compatibility (EMS) »
33.100.01 Electromagnetic compatibility in general »
National standards »
33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT »
33.100 Electromagnetic Compatibility (EMS) »
33.100.01 Electromagnetic compatibility in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Electronic engineering, electronics and communications »
E0 General rules and regulations for electronic engineering, electronics and communications »
E02 Design and calculation norms »
As a Replacement Of:
GOST R 51524-99: Electromagnetic compatibility of technical equipment. Adjustable speed electrical power drive systems. Requirements and test methods
The Document References:
GOST R 50397-2011: Electromagnetic compatibility of technical equipment. Тerms and definitions
GOST R 50648-94: Electromagnetic compatibility of technical equipment. Immunity to power frequency magnetic field. Technical requirements and test methods
GOST R 51317.2.4-2000: Electromagnetic compatibility of technical equipment. Electromagnetic environment. Compatibility levels for low-frequency conducted disturbances in industrial plants
GOST R 51317.2.5-2000: Electromagnetic compatibility of technical equipment. Electromagnetic environment. Classification of electromagnetic disturbances for different locations of technical equipment
GOST R 51317.3.11-2006: Electromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 75 A and subject to conditional connection. Limits and test methods
GOST R 51317.3.12-2006: Electromagnetic compatibility of technical equipment. Limitation of harmonic currents produced by equipment with input current greater than 16A and not greater than 75 A per phase connected to public low-voltage supply systems. Limits and test methods
GOST R 51317.3.2-2006: Electromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <=16 A per phase). Limits and test methods.
GOST R 51317.3.3-2008: Electromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A (per phase) and not subject to conditional connection. Limits and test methods
GOST R 51317.3.4-2006: Electromagnetic compatibility of technical equipment. Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A. Limits and test methods
GOST R 51317.4.11-2007: Electromagnetic compatibility of technical equipment. Voltage dips, short interruptions and voltage variations immunity. Requirements and test methods
GOST R 51317.4.13-2006: Electromagnetic compatibility of technical equipment. Immunity to non-sinusoidal distortion of supply voltage including mains signalling. Requirements and test methods
GOST R 51317.4.2-2010: Electromagnetic compatibility of technical equipment. Electrostatic discharge immunity. Requirements and test methods.
GOST R 51317.4.3-2006: Electromagnetic compatibility of technical equipment. Radio-frequency electromagnetic field immunity. Requirements and test methods.
GOST R 51317.4.34-2007: Electromagnetic compatibility of technical equipment. Voltage dips, short interruptions and voltage variations immunity for equipment with input current more than 16 A per phase. Requirements and test methods
GOST R 51317.4.4-2007: Electromagnetic compatibility of technical equipment. Immunity to nanosecond impulsive disturbance. Requirements and test methods
GOST R 51317.4.5-99: Electromagnetic compatibility of technical equipment. Microsecond high energy pulse disturbance immunity. Requirements and test methods
GOST R 51317.4.6-99: Electomagnetic compatibility of technical equipment. Immunity to conducted disturbance induced by radio-frequency fields. Requirements and test methods
GOST R 51317.4.7-2008: Electromagnetic compatibility of technical equipment. General guide on harmonics and interharmonics measuring instruments and measurement, for power supply systems and equipment connected thereto
GOST R 51318.11-2006: Electromagnetic compatibility of technical equipment. Industrial, scientific, medical and domestic (ISMD) high-frequency equipment. Radio disturbance. Limits and methods of measurement
GOST R 51318.14.1-2006: Electromagnetic compatibility of technical equipment. Household appliances, electric tools and similar apparatus. Radio disturbance. Limits and methods of measurements
GOST R 51318.16.1.1-2007: Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-1. Radio disturbance and immunity measuring apparatus. Measuring apparatus
GOST R 51318.16.1.2-2007: Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-2. Radio disturbance and immunity measuring apparatus and methods. Conducted radio disturbance measuring and immunity test apparatus
GOST R 51318.16.1.4-2008: Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-4. Radio disturbance and immunity measuring apparatus. Radiated radio disturbance measuring and immunity test apparatus
GOST R 51318.16.2.1-2008: Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 2-1. Methods of measurement of radio disturbances and immunity. Conducted radio disturbance measurements
GOST R 51318.16.2.3-2009: Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 2-3. Methods of measurement of radio disturbances and immunity. Radiated radio disturbance measurements
GOST R 51318.22-2006: Electromagnetic compatibility of technical equipment. Information technology equipment. Man-made radio disturbance. Limits and methods of measurement
GOST R 54418.21-2011: Renewable power engineering. Wind power engineering. Wind turbines. Part 21. Measurement and assessment of power quality characteristics of grid connected wind turbines
GOST R 55055-2012: Man-made radio disturbance. Terms and definitions
The Document is Referenced By:
GOST R 57903-2017: Photovoltaic systems. Stand-alone pumping systems for water supply. Performance determination. Selection and verification
GOST R IEC 61800-5-2-2015: Adjustable speed electrical power drive systems. Part 5-2. Functional safety requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
