GOST R ISO 2859-1-2007

ГОСТ Р ИСО 2859-1-2007

Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling schemes indexed by acceptance quality limit for lot-by-lot inspection

Статистические методы. Процедуры выборочного контроля по альтернативному признаку. Часть 1. Планы выборочного контроля последовательных партий на основе приемлемого уровня качества

Status: Effective

This standard establishes plans and procedures for sampling on an alternative basis for piece products based on an acceptable quality level (AQL). The standard does not establish a procedure for splitting batches or assessing their quality. Sampling plans extend (but are not limited to this list) to the control of such types of products as: - finished products; - components and raw materials; - operations; - materials in the production process; - deliveries in stock; - maintenance operations; - data or records; - administrative procedures

Настоящий стандарт устанавливает планы и процедуры выборочного контроля по альтернативному признаку для штучной продукции на основе приемлемого уровня качества (AQL). Стандарт не устанавливает процедуры расслоения партий или оценки их качества. Планы выборочного контроля распространяются (но не ограничиваются этим перечнем) на контроль таких видов продукции, как: - готовая продукция; - комплектующие изделия и сырье; - операции; - материалы в процессе производства; - поставки на складе; - операции обслуживания; - данные или записи; - административные процедуры

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 104

Approved: Federal Agency for Technical Regulation and Metrology, 3/21/2007

SKU: RUSS73921

Price: $1,211.79




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 03 Sociology. Services. Organization of firms and their management. Administration. Transport »

PromExpert » SECTION I. TECHNICAL REGULATION » III Quality » 2 Product quality assurance » 2.3 Quality Management » 2.3.2 Statistical methods of quality management »

ISO classifier » 03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT » 03.120 Quality » 03.120.30 Application of statistical methods »

National standards » 03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT » 03.120 Quality » 03.120.30 Application of statistical methods »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T5 Documentation System » T59 General methods and means of control and testing of products. Methods of statistical control of quality, reliability, durability »


As a Replacement Of:

GOST R 50779.71-99: Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection

The Document References:

GOST R 50779.10-2000: Statistical methods. Probability and general statistical terms. Terms and definitions

GOST R 50779.11-2000: Statistical methods. Statistical quality control. Terms and definitions

GOST R 50779.70-99: Statistical methods. Sampling procedures for inspection by attributes. Part 0. Introduction to the ISO 2859 attribute sampling system using an acceptable quality level (AQL)

GOST R 50779.73-99: Statistical methods. Sampling procedures for inspection by attributes. Part 3. Skip-lot sampling procedures

GOST R 50779.74-99: Statistical methods. Sampling procedures and charts for inspection by variables for percent nonconforming

GOST R 50779.77-99: Statistical methods. Acceptance sampling plans and procedures for the inspection of bulk materials

The Document is Referenced By:

GOST 10025-2016: Tin-phosphor bronze rods. Specifications

GOST 10092-2006: Cupro-nickel tubes for heat-exchange apparatus. Specifications

GOST 10155-2016: Manganin uninsulated wire. Specification

GOST 1048-2016: Strips of aluminium bronze for springs. Specifications

GOST 1049-2015: Manganese nickel wire. Specifications

GOST 10705-80: Electrically welded steel tubes. Specifications

GOST 10733-98: Mechanical hand and pocket watches. General specifications

GOST 11383-2016: Thin-walled copper and brass tubes. Specification

GOST 1150-2018: Boiler zinc plates. Specifications

GOST 1173-2006: Copper foil, ribbons, sheets and plates. Specifications

GOST 12302-2013: Packs made of polymeric films and composite materials. General specifications

GOST 12303-80: Boxes made from cardboard, paper

GOST 1232-82: Porcelain and glass pin-type insulators for voltage 1-35 kv

GOST 12569-99: Sugar. Acceptance rules and sampling methods

GOST 12786-80: Beer. Acceptance rules and sampling methods

GOST 12920-2013: Brass wire for cold upsetting

GOST 13073-2018: Zinc wire.Technikal requirements. Specifications

GOST 13083-2016: Rods of nickel and nickel-silicon alloys. Specifications

GOST 13479-82: Cardboard and combined cans

GOST 15040-2016: Oxygen-free copper pipes. Specification

GOST 1525-2015: Rods of monel. Specifications

GOST 1535-2006: Copper rods. Specifications

GOST 1535-2016: Copper rods. Specifications

GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications

GOST 15834-2016: Beryllium bronze wire. Specification

GOST 15885-2018: Tin-zinc-lead bronze ribbons and strips. Specifications

GOST 16264.0-2018: Electric machines of low power. Engines General specifications

GOST 16358-2019: Copper tapes for coaxial trunk cables. Technical conditions

GOST 167-2018: Lead tubes. Specifications

GOST 17217-2018: Tubes of copper-nickel alloy МНЖ 5-1. Specifications

GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications

GOST 1789-2013: Beryllium bronze strips and tapes. Specifications

GOST 1790-2016: Wire made of chromel alloy T, alumel, copes and constantan for thermoelectrodes of thermoelectric converters. Specification

GOST 18327-2018: Zinc strips for general use. Specifications

GOST 2060-2006: Brass rods. Specifications

GOST 2132-2015: Nickel anodes. Specifications

GOST 2170-2016: Strips of nickel and nickel low alloys. Specifications

GOST 2179-2015: Nickel and siliceous nickel wire. Specifications

GOST 2208-2007: Brass foil, ribbons, strips, sheets and plates. Specifications

GOST 2226-2013: Bags made of paper and composite materials. General specifications

GOST 22666-2016: Copper wire and kopel alloy wire for low-temperature thermoelectrical transducers. Specifications

GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods

GOST 23932-90: Laboratory glassware and equipment. General specifications

GOST 25377-2015: Needles for injections for repeated use. Specifications

GOST 25377-82: Syringe needles for repeated use

GOST 2622-2016: Manometric tubes made of bronze БрОФ4-0,25 and brass Л63. Specifications

GOST 2624-2016: Copper and brass capillary tubes. Specification

GOST 28846-90: Gloves and mittens. Specifications

GOST 28875-90: Spices. Acceptance and methods of analysis

GOST 29187-91: Quick-frozen fruits and berries

GOST 2936-2016: Planc-oval scamless radiator tubes. Specifications

GOST 30248-2013: Electrical carbon products. Electrical heating appliances made of carbon fibre materials. General specifications

GOST 30801.5-2012: Miniature fuses. Guide lines for quality assessment of miniature fuse-links

GOST 31366-2008: Brass rods for free machining purposes. Specifications

GOST 31516-2012: Medical maximum glass thermometrs. General specifications

GOST 31612-2012: Leakage electric current mine-type protective devices for voltage nets to 1200 V. General technical requirements

GOST 31620-2012: Surgical sutures. General technical requirements. Test method

GOST 31638-2012: Food additives. Sodium and potassium triphosphates E451. Specifications

GOST 31642-2012: Food additives. Sodium lactate Е325. General specifications

GOST 31656-2012: Food additives. Food potassium lactate Е326. Specifications

GOST 31686-2012: Food additives. Sodium polyphosphate E452(i). General specifications

GOST 31687-2012: Food additives. Potassium phosphates E340. General specifications

GOST 31725-2012: Food additives. Sodium phosphates E339. General specifications

GOST 31726-2012: Food additives. Citric acid anhydrous E330. Specifications

GOST 31905-2012: Food additives. Calcium lactate Е327. Specifications

GOST 32007-2012: Food additives. Calcium phosphates E341. General specifications

GOST 32080-2013: Liqueur-vodka products. Acceptance rules and test methods

GOST 32092-2013: Brown ware. General specifications

GOST 32170-2013: Tea. Acceptance rules

GOST 32484.4-2013: High-strength structural bolting assemblies for preloading. System HV - Hexagon bolt and nut assemblies

GOST 32521-2013: Pоlymеric sасks. General specifications

GOST 32522-2013: Polypropylene woven sacks. General specifications

GOST 32671-2014: Glass containers for baby`s nutrition. General specifications

GOST 32751-2014: Сonfectionery. Methods of sampling for microbiological analysis

GOST 33214-2021: Closing means for perfumery and cosmetic products. General specifications

GOST 33590-2015: Souvenir matches. General specifications

GOST 33746-2016: Returnable polymeric boxes. General specifications

GOST 33748-2016: Aluminium cans of deep drawing with easy open end. General specifications

GOST 33756-2016: Plastic consumer packaging. General specifications

GOST 33757-2016: Flat wooden pallets. Specification

GOST 33759-2016: Instrument oil (MVP). General specifications

GOST 33781-2016: Consumer packaging made of cardboard, paper and combined materials. General specifications

GOST 33823-2016: Quick-frozen fruits. General specifications

GOST 34032-2016: Board and combined cans. General specifications

GOST 34110-2017: Fruits, vegetables, mushrooms and their products, frozen. Acceptance rules and sampling methods

GOST 34117-2017: Cookware and tableware made of corrosion-resistant steel for children and teenagers. Technical conditions

GOST 34125-2017: Dried fruits and vegetables. Acceptance rules, sampling and sample preparation

GOST 34129-2017: Vegetables are salted and pickled, fruit is salted and soaked. Acceptance rules, sampling and sample preparation

GOST 34257-2017: Packaging. Bar-top stoppers and over capsule for glass bottles. General specifications

GOST 34264-2017: Polymeric transport containers. General specifications

GOST 34339-2017: Motor vehicles. Hydraulic telescopic shock absorbers. Technical requirements and test methods

GOST 34504-2018: Automotive vehicles. Jacks are mechanical. Technical requirements and test methods

GOST 34534-2019: Packaging. Polymer bottles for food liquids. General specifications

GOST 475-78: Wooden doors. General specifications

GOST 490-2006: Lactic acid for use in foodstuffs. Specifications

GOST 5090-2016: Hardware devices for wooden windows and doors. Specification

GOST 5189-2018: Constantan strips. Specifications

GOST 520-2002: Rolling bearings. General specifications

GOST 520-2011: Roll bearings. General specifications.

GOST 5220-2018: Germen silver wire. Specifications

GOST 5221-2008: Tin-zink bronze wire. Specifications

GOST 5222-2016: Silicon-manganese bronze wire. Specifications

GOST 5307-2015: Constantan uninsulated wire. Specifications

GOST 5362-2018: Brass ribbons. Specifications

GOST 538-2001: Locks and building hardware. General specifications

GOST 538-2014: Locks and building hardware. General specifications

GOST 546-2001: Copper cathodes. Specifications

GOST 5541-2002: Cork means of closing. General specifications

GOST 5638-2018: Copper roil foil for technical purposes. Specifications

GOST 5904-2019: Confectionery. Acceptance rules and sampling methods

GOST 598-2020: General purpose zinc sheets. Specifications

GOST 6235-2020: Nickel sheets and strips. Specifications

GOST 6688-2016: Brass bars of rectangular section. Specifications

GOST 767-2020: Copper anodes. Specifications

GOST 849-2008: Primary nickel. Specifications

GOST 89-2018: Rolled-in lead sheets. Specifications

GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements

GOST 9142-2014: Boxes of corrugated board. General specifications

GOST 9570-2016: Box and pestpallets. General specifications

GOST IEC 60901-2016: Single-capped fluorescent lamps. Performance specifications

GOST IEC 61195-2019: Double fluorescent lamps. Safety requirements

GOST IEC 61199-2019: Single-ended fluorescent lamps. Safety requirements

GOST ISO 3269-2015: Fasteners. Acceptance inspection

GOST ISO 6157-3-2014: Fasteners. Defects of surface. Part 3. Bolts, screws and studs, special

GOST ISO/IEC 15416-2019: Information Technology. Technologies for automatic identification and data collection. Bar code character test specification for print quality assessment. Line symbols

GOST R 12.4.262-2011: Occupational safety standards system. Protective clothing against toxic chemicals. Method for determination of resistance to permeation by liquids and gases

GOST R 50779.30-95: Statistical methods. Acceptance sampling. General requirements

GOST R 50779.70-2018: Statistical methods. Sampling procedures for inspection by attributes. Introduction to GOST R ISO 2859 series of standards

GOST R 50779.75-2018: Statistical methods. Sequential sampling plans for inspection by attributes

GOST R 50779.81-2018: Statistical methods. Double sampling plans by attributes with minimal sample sizes indexed by PRQ and CRQ values

GOST R 50779.83-2018: Statistical methods. Acceptance sampling procedures by attributes. System zero acceptance on the basis of the quality reserve principle

GOST R 51024-2012: Medical electronics hearing aids. Technical requirements and test methods

GOST R 51068-97: Latex nipples for babies. Specifications

GOST R 51135-2010: Liqueur-vodka products. Acceptance rules and test methods

GOST R 51144-2009: Wine products. Acceptance rules and methods of sampling

GOST R 51144-98: Products of wine industry. Acceptance rules and methods of sampling

GOST R 51214-98: Closure products. General on security, marking and acceptance rules

GOST R 51322.1-2011: Plugs and socket-outlets for household and similar purposes. Part 1. General requirements and methods of tests

GOST R 51574-2018: Food grade salt. Specifications

GOST R 51740-2016: Specifications for food products. General requirements for development and lay out

GOST R 51760-2011: Polymeric consumer's containers. General specifications

GOST R 52078-2003: Wood particle boards, laminated with paper impregnated with thermosetting resins

GOST R 52230-2004: Electrical equipment for vehicles and tractors. General specifications

GOST R 52238-2004: Single-use sterile rubber surgical gloves. Specification

GOST R 52239-2004: Single-use medical examination gloves. Part 1. Specification for gloves made from rubber latex or rubber solution

GOST R 52597-2006: Brass rods for free machining purposes. Specifications

GOST R 52643-2006: High-strength screws and nuts washers for metal structures. General specifications

GOST R 52664-2010: Welded pipe sheet piles. Specifications

GOST R 52706-2007: Tungsten filament lamps for domestic and similar general lighting purposes. Performance requirements

GOST R 52712-2007: Safety requirements for incandescent lamps. Part 1. Tungsten filament lamps for domestic and similar general lighting purposes

GOST R 52713-2007: Discharge lamps (excluding fluorescent lamps). Safety requirements

GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications

GOST R 52789-2007: Bottles from polyethylene terephthalate for food liquids. General specifications

GOST R 52823-2007: Food additives. Sodium phosphates E339. General specifications

GOST R 52824-2007: Food additives. Sodium and potassium triphosphates E451. Specifications

GOST R 52848-2007: Vehicles. Apparatus of air brake actuator. General technical requirements

GOST R 52850-2007: Vehicles. Single-stage compressed air pumps. Technical requirements and test methods

GOST R 52859-2007: Rolling bearings. General specifications

GOST R 52897-2007: Glass jars food products of fishing industry. Specifications

GOST R 52898-2007: Glass bottles for food acetic acid and food vinegars. Specifications

GOST R 52921-2008: Medical maximum glass thermometers. General specifications

GOST R 53005-2008: Surgical suture materials. General technical requirements. Test methods

GOST R 53039-2008: Food additives. Food potassium lactate E326. Specifications

GOST R 53040-2008: Food additives. Anhydrous citric acid E330. Specifications

GOST R 53069-2008: Food additives. Potassium phosphates E340. General specifications

GOST R 53083-2008: Food additives. Sodium polyphosphate E452(i). Specifications

GOST R 53119-2008: Food additives. Sodium lactate E325. Specifications

GOST R 53361-2009: Bags made of paper and composite materials. General specifications

GOST R 53416-2009: Glass containers for medicines. General specifications

GOST R 53439-2009: Brass wire for cold upsetting. Specifications

GOST R 53544-2009: Brown ware. Specifications

GOST R 53545-2009: Stone ware. Specifications

GOST R 53548-2009: Majolica ware. General specifications

GOST R 53664-2009: High-strength cheese-head and conical bolts for bridge building. Nuts and washers for them. Specifications

GOST R 53711-2009: Electronic components. Rules acceptation

GOST R 53767-2010: Polymeric and combined means of closing for perfumery cosmetic production. General specifications

GOST R 53784-2010: Optical elements for light signal devices of a railway transport. Specifications

GOST R 53793-2010: Live working. Conformity assessment applicable to tools, devices and equipment

GOST R 53805-2010: Motor vehicles. Manual slack adjusters of drum brakes for trucks and buses. Technical requirements and test methods

GOST R 53806-2010: Vehicles. Metallic cables of parking brakes. Technical requirements and test methods

GOST R 53807-2010: Vehicles. Hydraulic cylinder and pumps hydraulic mechanisms tilting cab. Technical requirements and test methods

GOST R 53808-2010: Automobile engines. Camshafts. Technical requirements and test methods

GOST R 53809-2010: Automobile engines. Cylinder liners. Technical requirements and test methods

GOST R 53810-2010: Automobile engines. Valves. Technical requirements and test methods

GOST R 53811-2010: Automobile engines. Valve springs. Technical requirements and test methods

GOST R 53812-2010: Automobile engines. Valve tappets. Technical requirements and test methods

GOST R 53813-2010: Automobile engines. Connecting rods. Technical requirements and test methods

GOST R 53815-2010: Cars. Ball type trailer coupling equipment. Technical requirements and test methods

GOST R 53816-2010: Vehicles. Hydraulic telescopic shock absorbers. Technical requirements and test methods

GOST R 53817-2010: Vehicles. Telescopic single acting hydraulic cylinders. Technical requirements and test methods

GOST R 53818-2010: Vehicles. Wheel balancing weights. Technical requirements and test methods

GOST R 53820-2010: Motor vehicles. Details of sealing and protective. Technical requirements and test methods

GOST R 53821-2010: Vehicles. Diaphragms and plate membranes. Technical requirements and test methods

GOST R 53822-2010: Vehicles. Hydraulic jacks. Technical requirements and test methods

GOST R 53823-2010: Vehicles. Additional antitheft devices. Technical requirements and test methods

GOST R 53824-2010: Vehicles. Not-folding wheels. Technical requirements and test methods

GOST R 53825-2010: Vehicles. Pneumatic springs. Technical requirements and test methods

GOST R 53826-2010: Vehicles. High-voltage wires. Technical requirements and test methods

GOST R 53827-2010: Vehicles. Cylindrical screw springs, torsions, stabilizers suspension. Technical requirements and test methods

GOST R 53828-2010: Vehicles. System of microclimate. Technical requirements and test methods

GOST R 53829-2010: Vehicles. Electrical starters. Technical requirements and test methods

GOST R 53830-2010: Vehicles. Hubs and the half-wheels. Technical requirements and test methods

GOST R 53832-2010: Vehicles. Heat exchangers and thermostats. Technical requirements and test methods

GOST R 53833-2010: Vehicles. Independent warming-heating units. Technical requirements and test methods

GOST R 53834-2010: Vehicles. Hoses for hydraulic systems. Technical requirements and test methods

GOST R 53835-2010: Vehicles. Elements of the steering actuator and guide vane suspension. Technical requirements and test methods

GOST R 53836-2010: Automobile engines. Thin-walled liners of main and connecting rod bearings. Technical requirements and test methods

GOST R 53839-2010: Automobile engines. Liquid pumps of cooling systems. Technical requirements and test methods

GOST R 53841-2010: Automobile engines. Drive belts. Technical requirements and test methods

GOST R 53842-2010: Automobile engines. Spark plugs. Technical requirements and test methods

GOST R 53843-2010: Engines of vehicles. Piston rings. Technical requirements and test methods

GOST R 53844-2010: Vehicles. Fine filters of oil for automobile, tractor and combine engines. Technical requirements and test methods

GOST R 53879-2010: Self-ballasted lamps for general lighting services. Performance requirements

GOST R 53921-2010: Glass containers for alcohol and non – alcohol food products. General specifications

GOST R 53943-2010: Food additives. Calcium lactate Е327. Specifications

GOST R 53945-2010: Food additives. Calcium phosphates E341. General specifications

GOST R 53968-2010: Food additives. Potassium acetate Е261(i). Specifications

GOST R 54156-2010: Table utensils made from stainless steel for children and teenagers. Specifications

GOST R 54162-2010: Tempered glass. Specifications

GOST R 54174-2010: Sealed insulating glass units. Rules and methods of products quality assurance

GOST R 54176-2010: Soft coating low emissivity glass. Specification

GOST R 54177-2010: Hart coat low emissivity glass. Specifications

GOST R 54178-2010: Soft coating solar protection or decorative glass. Specifications

GOST R 54179-2010: Hard coating solar protection or decorative glass. Specifications

GOST R 54180-2010: Heat strengthened glass. Specifications

GOST R 54394-2011: Bone china ware. Specifications

GOST R 54395-2011: Faience ware. Specifications

GOST R 54396-2011: Vitreous china ware. Specifications

GOST R 54397-2011: Ceramic cooking ware for thermal processing off foodstuff. Specifications

GOST R 54416-2011: Incandescent lamps. Safety specifications. Part 3. Tungsten-halogen lamps (non-vehicle)

GOST R 54448-2011: Single burner gas-fired overhead radiant tube heaters for non-domestic use. Part 1. Safety requirements

GOST R 54470-2011: Glass containers for canned food products. General specifications

GOST R 54471-2011: Document management. Information stored electronically. Recommendations for trustworthiness and reliability

GOST R 54473-2011: Nanocoatings of cutting tools based on diamond and cubic boron nitride. General technical requirements and test methods

GOST R 54474-2011: Glass containers. Rules of acceptance on the base of sampling control for inspection by attributes

GOST R 54537-2011: Food additives. Calcium acetate Е263. Specifications

GOST R 54538-2011: Food additives. Tricalcium citrate E333(iii). Specifications

GOST R 54568-2011: Tubes from alloy МНЖ5-1. Specifications

GOST R 54572-2011: Food additives. Potassium citrates E332. General specifications

GOST R 54573-2011: Food additives. Magnesium phosphates E343. General specifications

GOST R 54575-2011: Porcelain ware. Specifications

GOST R 54626-2011: Food additives. Sodium acetates Е262. General specifications

GOST R 54640-2011: Sugar. Acceptance rules and sampling methods

GOST R 54901-2012: Dried beet pulp. Specifications

GOST R 54981-2012: Food additives. Sodium propionate Е281. Specifications

GOST R 55053-2012: Food additives. Potassium carbonate Е501. General specifications

GOST R 55054-2012: Food additives. Pyrophosphates E450. General specifications

GOST R 55504-2013: Metal tins for preserve. Specifications

GOST R 55520-2013: Passenger cars. Elastic semi cardan (clutch) transmission shafts. Technical requirements and test methods

GOST R 55521-2013: Automobile engines. Pumps lubrication systems. Technical requirements and test methods

GOST R 55522-2013: Vehicles. Slack adjusters of drum brakes for vehicles and buses with automatic adjustment. Technical requirements and test methods

GOST R 55579-2013: Food additives. Azo colours. Specifications

GOST R 55580-2013: Food additives. Ammonium carbonate E503. General specifications

GOST R 55581-2013: Food additives. Potassium propionate Е283. Specifications

GOST R 55582-2013: Food additives. Calcium propionate E282. Specifications

GOST R 55583-2013: Food additives. Potassium sorbate E202. Specifications

GOST R 55705-2013: Lighting devices with the LED light sources. General specifications

GOST R 55738-2013: Studs and ceramic ferrules for stud welding

GOST R 55849-2013: Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift. Part 1. Pumps. General technical requirements

GOST R 55850-2013: Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift. Part 2. Surface-drive systems. General technical requirements

GOST R 55973-2014: Food additives. Calcium chloride. Technical requirements

GOST R 57396-2017: Rubber surgical gloves. Technical requirements

GOST R 57397-2017: Rubber examination medical gloves. Technical requirements

GOST R 57398-2017: General purpose rubber gloves. Technical requirements

GOST R 57402-2017: Medical gloves. Determination of expiration dating

GOST R 57403-2017: Poly(vinyl chloride) medical gloves. Technical requirements

GOST R 57404-2017: Medical gloves. Quality assessment guide

GOST R 57458-2017: Heated tobacco. General specifications

GOST R 57671-2017: LED irradiators for greenhouses. General specifications

GOST R 58109-2018: The liquids for electronic nicotine delivery systems. General specifications

GOST R 58395-2019: Heat storage solid fuel heat sources. General requirements and test methods

GOST R 58553-2019: Chewing tobacco. General specifications

GOST R 58815-2020: Lamps with LEDs for museum lighting. General specifications

GOST R 58943-2020: A system for ensuring the accuracy of geometric parameters in construction. Accuracy control

GOST R 9.318-2013: Unified system of corrosion and ageing protection. Nanostructure non-metallic inorganic coatings formed by microarc oxidation on aluminium and its alloys. General requirements and methods of control

GOST R 9.915-2010: Unified system of corrosion and ageing protection. Metals, alloys, coatings, products. Test methods of hydrogen embrittlement

GOST R EN 374-2009: Occupational safety standards system. Personal protection of hands. Protective gloves against chemicals and micro-organisms. General technical requirements. Methods of testing

GOST R IEC 60086-1-2010: Primary batteries. Part 1. General

GOST R IEC 60952-1-2017: Aircraft batteries. Part 1. General test requirements and performance levels

GOST R IEC 61193-2-2015: Quality assessment systems. Part 2. Selection and use of sampling plans of electronic components and packages

GOST R IEC 61747-1-1-2015: Liquid crystal display devices. Part 1-1. Generic. Generic specification

GOST R IEC 62259-2007: Secondary cells and batteries containing alkaline or other non-acid electrolytes. Nickel-cadmium prismatic secondary single cells with partial recombination

GOST R IEC 62341-1-1-2015: Organic light emitting diode (OLED) displays. Part 1-1. Generic specification

GOST R ISO 11193-2-2009: Single-use examination gloves. Part 2. Specification for gloves made from poly (vinyl chloride)

GOST R ISO 12491-2011: Building materials and components. Statistical methods for quality control

GOST R ISO 12947-2-2011: Textiles. Determination of the abrasion resistance of fabrics by the Martindale method. Part 2. Determination of specimen breakdown

GOST R ISO 12947-3-2012: Textiles. Determination of the abrasion resistance of fabrics by the Martindale method. Part 3. Determination of mass loss

GOST R ISO 12947-4-2012: Textiles. Determination of the abrasion resistance of fabrics by the Martindale method. Part 4. Assessment of appearance change

GOST R ISO 13533-2013: Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment. General technical requirements

GOST R ISO 13628-4-2016: Petroleum and natural gas industries. Design and operation of subsea production systems. Part 4. Subsea wellhead and tree equipment

GOST R ISO 14560-2007: Statistical methods. Acceptance sampling procedures by attributes. Specified quality levels in nonconforming items per million

GOST R ISO 17078-3-2013: Petroleum and natural gas industries. Drilling and production equipment. Part 3. Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels. General technical requirements

GOST R ISO 18414-2008: Statistical methods. Acceptance sampling procedures by attributes. Accept-zero sampling system based on credit reserve factor for product quality

GOST R ISO 2859-10-2008: Statistical methods. Sampling procedures for inspection by attributes. Part 10. Introduction to the GOST R ISO 2859 series of standards

GOST R ISO 2859-3-2009: Statistical methods. Sampling procedures for inspection by attributes. Part 3. Skip-lot sampling procedures

GOST R ISO 2859-5-2009: Statistical methods. Sampling procedures for inspection by attributes. Part 5. System of sequential sampling plans indexed by AQL for lot-by-lot inspection

GOST R ISO 28801-2013: Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)

GOST R ISO 3269-2009: Fasteners. Acceptance inspection

GOST R ISO 3951-1-2007: Statistical methods. Sampling procedures for inspection by variables. Part 1. Specification for single sampling plans indexed by acceptance quality limit for lot-by-lot inspection for a single quality characteristic and a single AQL

GOST R ISO 3951-1-2015: Statistical methods. Sampling procedures for inspection by variables. Part 1. Specification for single sampling plans indexed by AQL for lot-by-lot inspection for a single quality characteristic and a single AQL

GOST R ISO 3951-2-2009: Statistical methods. Sampling procedures for inspection by variables Part 2. General specification for single sampling plans indexed by AQL for lot-by-lot inspection of independent quality characteristics

GOST R ISO 3951-2-2015: Statistical methods. Sampling procedures for inspection by variables. Part 2. General specification for single sampling plans indexed by AQL for lot-by-lot inspection of independent quality characteristics

GOST R ISO 3951-5-2009: Statistical methods. Sampling procedures for inspection by variables. Part 5. Sequential sampling plans indexed by AQL for known standard deviation

GOST R ISO 7198-2013: Cardiovascular implants. Tubular vascular prostheses

GOST R ISO 7787-2-2012: Dental rotary instruments. Cutters. Part 2. Carbide laboratory cutters

GOST R ISO 8007-3-2014: Carbonaceous materials used in the production of aluminium. Sampling plans and sampling from individual units. Part 3. Sidewall blocks

GOST R ISO/TR 8550-1-2007: Statistical methods. Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots. Part 1. General requirements

GOST R ISO/TR 8550-2-2008: Statistical methods. Guide to the selection and usage of acceptance sampling systems of discrete items in lots. Part 2. Sampling by attributes

GOST R ISO/TR 8550-3-2008: Statistical methods. Guide to the selection and usage of acceptance sampling systems of discrete items in lots. Part 3. Sampling by variables

MR 3.5.1.0113-16: Use of gloves to prevent healthcare-associated infections in health organizations

ODM 218.3.095-2017: Corrosion protection of concrete and reinforced concrete structures of transport facilities

Order 2907: On approval of the procedure for establishing and changing the interval between verifications of measuring instruments, the procedure for establishing, canceling calibration procedures and amending them, requirements for methods for verifying measuring instruments

PNST 375-2019: Gas cylinders. Technical Requirements and Testing of Automatic Gas Shut-Off Valves for LPG Cylinders

PNST 70-2015: Multifunction soft coating glass. Specifications

R 1323565.2.001-2018: State syste for insuring the uniformity of measurements. Non-invasive sphygmomanometers. Calibration methods

R 50.2.094-2013: State system for ensuring the uniformity of measurements. The methodology of the metrological examination of the technical regulations of the Customs Union

RMG 76-2004: State system for ensuring the uniformity of measurements. Internal control of quantitative chemical analysis result's accuracy

SP 46.13330.2012: Bridges and pipes

SP 72.13330.2016: Protection of buildings, facilities and structures against corrosion

TU 9462-001-84299122-2010: Ampoules medical colorless and brown from glass of the 1st hydrolytic class

Customers Who Viewed This Item Also Viewed:

Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Steel building structures. General specifications
Language: English
Price: $250.17
Fencing constructions for translucent buildings and structures. Design rules
Language: English
Price: $609.15
Electromagnetic compatibility of multimedia equipment. Emission requirements
Language: English
Price: $974.64
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Language: English
Price: $292.05
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20
Steel structures
Language: English
Price: $297.00
Hot-rolled sheet. Range
Language: English
Price: $72.27
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
Language: English
Price: $102.96
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Hexagon head bolts. Product grades A and B
Language: English
Price: $203.94

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!