GOST R 54500.3-2011
ГОСТ Р 54500.3-2011
|
|
Uncertainty of measurement. Part 3. Guide to the expression of uncertainty in measurement
Неопределенность измерения. Часть 3. Руководство по выражению неопределенности измерения
Status: Not effective - Canceled. Registration information 1065-st dated 09/12/2017 (official website of Rosstandart); IUS 1-2018
This manual establishes the general rules for estimating and expressing measurement uncertainty, which should be observed when measuring with different accuracy and in different areas, from technical measurements in production to basic scientific research
Настоящее Руководство устанавливает общие правила оценивания и выражения неопределенности измерения, которые следует соблюдать при измерениях разной точности и в разных областях - от технических измерений на производстве до фундаментальных научных исследований
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/16/2011
SKU: RUSS73947
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
17 Metrology and measurements. Physical phenomena »
PromExpert »
SECTION II. METROLOGICAL »
I Organizational and technical bases of metrological support »
1 Organization and management of metrological support »
1.1 Basic provisions of metrological support »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.1 Basic requirements for testing laboratories and their activities »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T8 State measurement system »
T80 Rules, norms, regulations infield of ensuring uniformity of measurements »
The Document is Referenced By:
GOST 22.2.04-2012: State system for ensuring the uniformity of measurements. Management and procedure of internal metrological surveillance of the enterprises with hazardous industrial objects
GOST 34345-2017: Multi-split air conditioners and air-to-air heat pumps. Testing and performance evaluation
GOST 34348-2017: Вакуумная техника. Вакуумметры. Оценивание неопределенностей результатов калибровки при непосредственном сличении с эталоном
GOST 8.129-2013: State system for ensuring the uniformity of measurements. State verification schedule for means measuring time and frequency
GOST IEC 62127-1-2015: State system for ensuring the uniformity of measurements. Parameters of ultrasonic fields. General requirements to measuring methods and characterization of fields in the frequency range 0,5 to 40 MHz
GOST ISO 14509-1-2015: Small craft. Measurement of airborne sound emitted by powered recreational craft. Part 1. Pass-by measurement procedures
GOST R 50779.60-2017: Statistical methods. Use in proficiency testing by interlaboratory comparison
GOST R 50779.84-2018: Statistical methods. Uncertainty evaluation of results of two-factor crossed design
GOST R 54418.11-2017: Renewable power engineering. Wind power engineering. Wind turbines. Part 11. Methods for determination of acoustic noise characteristics
GOST R 54418.14-2017: Renewable power engineering. Wind power engineering. Wind turbines. Part 14. Declaration of acoustic noise characteristics
GOST R 54500.1-2011: Uncertainty of measurement. Part 1. Introduction to guides on uncertainty in measurement
GOST R 54500.3.1-2011: Uncertainty of measurement. Part 3. Guide to the expression of uncertainty in measurement. Supplement 1. Propagation of distributions using a Monte Carlo method
GOST R 54500.3.2-2013: Uncertainty of measurement. Part 3. Guide to the expression of uncertainty in measurement. Supplement 2. Extension to any number of output quantities
GOST R 54579-2011: Acoustics. Application of new measurement methods in building and room acoustics
GOST R 55175-2012: Mine atmosphere. Methods of dust content control
GOST R 55177-2012: Mechanical vibration. Laboratory measurement of vibration-and-acoustic properties of resilient elements filled with liquids. Principles
GOST R 55310-2012: State system for ensuring the uniformity of measurements. Ultrasonic medical physiotherapy equipment. General requirements to measurement methods of performance during the implementation and operation
GOST R 55798-2013: Gas Turbines. Methods of testing. Acceptance tests
GOST R 56157-2014: Soil. Procedures (methods) of analysis of composition and properties of soil samples. General requirements for development
GOST R 56234-2014: Acoustics. Software products for the calculation of the noise level outdoors. Quality requirements and test conditions
GOST R 56235-2014: Declaration and verification of airborne sound insulation values for sound insulators
GOST R 56771-2015: Acoustics. Laboratory method of noise measurement from water supply installations inside buildings
GOST R 57216-2016: Radiation control. Presentation of measuring results
GOST R 57553-2017: The nature conservancy. Hydrosphere. The assessment of water quality compliance with the statutory requirements taking into account summation effect
GOST R 57554-2017: The nature conservancy. Hydrosphere. The accounting of measurement accuracy of controlled parameters in assessment of water quality compliance with statutory requirements
GOST R 57614-2017: Natural combustible gas. Energy determination
GOST R 57851.4-2017: Gas-condensate mixture. Part 4. Calculation of the component-fraction composition
GOST R 57900-2017: Buildings and constructions. Determination and application of measurement uncertainties of sound insulation
GOST R 58036-2017: Petroleum and natural gas industry. Offshore oil and gas field structures. Weight control during engineering and construction
GOST R 8.566-2012: The state system for assuring the traceability of measurements. The blackbody radiators. Standard procedure for verification and calibration
GOST R 8.613-2013: State system for ensuring the uniformity of measurements. The procedures (methods) of measurements of structure and properties of water samples. General requirements to development
GOST R 8.623-2015: State system for ensuring the uniformity of measurements. Relative dielectric permittivity and the loss tangent of solid dielectrics. Procedure of measurements at microwave frequencies
GOST R 8.790-2012: State system for ensuring the uniformity of measurements. The temperature lamps
GOST R 8.795-2012: State system for ensuring the uniformly of measurements. Identification of chemicals substance by a chromato-mass spectrometry method. The general requirements
GOST R 8.820-2013: State system for ensuring the uniformity of measurements. Metrological assurance. General
GOST R 8.845-2013: State system for ensuring the uniformity of measurements. Air ion composition measurements. Method of measuring volume density of electric charge of air and air ion concentration using aspiration capacitor
GOST R 8.846-2013: State system for ensuring the uniformity of measurements. Air ion composition measurements. Air ionizers and air ion generators. Methods of measuring their parameters
GOST R 8.848-2013: State system for ensuring the uniformity of measurements. Tristimulus colorimeters. Method for the determination of parameters of channels
GOST R 8.850-2013: State system for ensuring the uniformity of measurements. Characterization of the performance of illuminance meters and luminance meter
GOST R 8.878-2014: State system for ensuring the uniformity of measurements. Nuclear material control and accounting. System of measurements. Estimation of uncertainty in the sampling
GOST R 8.890-2015: State system for ensuring the traceability of measurements. Optoelectronic instruments as a part of space-based informational and measuring systems for Earth Observation. Organizational and methodical provisions for ensuring the uniformity of radiometric measurements
GOST R 8.903-2015: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. Procedures of measurements
GOST R 8.904-2015: State system for ensuring the uniformity of measurements. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 2. Verification and calibration of testing machines
GOST R 8.913-2016: State system for ensuring the uniformity of measurements. Satellite laser ranging systems. Accuracy and measurement uncertainty. Standardized metrological characteristics
GOST R 8.930-2016: State system for ensuring the uniformity of measurements. Transfer units of time, frequency and time scale national UTC (SU) from the State primary standard. The Russian Federation with the use of the GLONASS system. Fundamentals
GOST R 8.932-2017: State system for ensuring the uniformity of measurements. Requirement to methodologies (to the methods) of measuring in area of uses of nuclear-power. Substantive provisions
GOST R 8.937-2017: State system for ensuring the uniformity of measurements. National standard. Standard reference data. Segnetoelectric ceramic materials based on niobates of sodium and potassium. Dielectric and piezoelectric characteristics at temperatures from 0° С to 10
GOST R 8.938-2017: State system for ensuring the uniformity of measurements. National standard. Standard reference data. Liquid and gaseous propane. Thermodynamic properties, dynamic viscosity and thermal conductivity at temperature from 86 К up to 700 K and pressure up to
GOST R 8.939-2017: State system for ensuring the uniformity of measurements. National standard. Standard reference data. Optically transparent materials based on CaLa2S4 - La2S3. Thermal conductivity in the temperature range from 80 K to 400 K
GOST R 8.941-2017: State system for ensuring the uniformity of measurements. National standard. Standard reference data. Materials for standard LTEC. Graphite GIP-4. Linear temperature expansion coefficient for the temperature range from 20 °C to 2500 °C
GOST R 8.944-2018: State system for ensuring the uniformity of measurements. Standard reference data. Aluminium, Mercury. Reflectivity and emittance in near and supercritical region
GOST R 8.945-2018: State system for ensuring the uniformity of measurements. Standard reference data. Thermophysical characteristics of piezoceramics based on lithium niobate in the temperature range from 300 K to 900 K
GOST R 8.972-2019: State system for ensuring the uniformity of measurements. Gas consumption and amount. Measurement technique with critical nozzles
GOST R IEC 60601-2-8-2017: Medical electrical equipment. Part 2-8. Particular requirements for the basic safety and essential performance of therapeutic X-ray equipment operating in the range 10 kV to 1 MV
GOST R IEC 62282-3-200-2014: Fuel cell technologies. Part 3-200. Stationary fuel cell power systems. Performance test method
GOST R ISO 10302-2-2014: Small air-moving devices for information technology and telecommunication equipment. Noise and vibration test codes. Part 2. Structure-born vibration measurements
GOST R ISO 11904-1-2017: Acoustics. Determination of sound immission from sound sources placed close to the ear. Part 1. Technique using a microphone in a real ear
GOST R ISO 11904-2-2017: Acoustics. Determination of sound immission from sound sources placed close to the ear. Part 2. Technique using a manikin
GOST R ISO 13138-2014: Air quality. Sampling conventions for airborne particle deposition in the human respiratory system
GOST R ISO 15193-2015: In vitro medical devices. Measurement of quantities in samples of biological origin. Requirements for content and presentation of reference measurement procedures
GOST R ISO 15194-2013: In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for certified reference materials and the content of supporting documentation
GOST R ISO 16610-21-2015: State system for ensuring the traceability of measurements. Geometrical product specifications (GPS). Filtration. Part 21. Linear profile filters. Gaussian filters
GOST R ISO 16840-2-2015: Wheelchair seating. Part 2. Determination of physical and mechanical characteristics of devices intended to manage tissue integrity. Seat cushions
GOST R ISO 21748-2012: Statistical methods. Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
GOST R ISO 22514-1-2012: Statistical methods. Process management. Part 1. General principles
GOST R ISO 22514-1-2015: Statistical methods. Process management. Part 1. General principles
GOST R ISO 22514-7-2014: Statistical methods. Process management. Part 7. Capability of measurement processes
GOST R ISO 22514-8-2015: Statistical methods. Process management. Part 8. Machine performance of a multi-state production process
GOST R ISO 26101-2014: Acoustics. Test methods for the qualification of free-field environments
GOST R ISO 3741-2013: Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Precision methods for reverberation test rooms
GOST R ISO 3743-1-2013: Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for small movable sources in reverberant fields. Part 1. Comparison method for a hard-wall test room
GOST R ISO 3744-2013: Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for an essentially free field over a reflecting plane
GOST R ISO 3746-2013: Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Survey methods using an enveloping measurement surface over a reflecting plane
GOST R ISO 3747-2013: Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering/survey methods for use in situ in a reverberant environment
GOST R ISO 8253-1-2012: Acoustics. Audiometric test methods. Part 1. Pure-tone air and bone conduction audiometry
GOST R ISO 8253-3-2014: Acoustics. Audiometric test methods. Part 3. Speech audiometry
GOST R ISO 9612-2013: Acoustics. Noise measurement for the purpose of evaluating human exposure to noise. Method of measurements at workplaces
GOST R ISO/IEC 31010-2011: Risk management. Risk assessment methods
MI 3599-2018: Recommendation. State system for ensuring uniformity of measurements. Development and certification of standard reference data public service methodologies
MI 3600-2018: Recommendation. State system for ensuring uniformity of measurements. Development and certification of "Standard Reference Data Tables" and "Recommended Reference Data Tables"
MU 2.6.1.037-2015: Determination of average annual values of EES of radon isotopes in indoor air from measurements of different duration
MU 2.6.1.038-2015: Assessment of potential radon danger of land for construction of residential, public and industrial buildings
MUK 2.6.5.044-2016: The total activity of alpha-emitting radionuclides in environmental objects. Track Measurement
MUK 4.3.3213-14: Measurement and evaluation of vibration on ships and offshore structures
MUK 4.3.3214-14: Measurement and evaluation of electric, magnetic and electromagnetic fields on ships and offshore structures
R 50.1.098-2014: Statistical methods. Determination and use of straight-line calibration functions
R 50.1.100-2014: Statistical methods. Three approaches for the interpretation and assessment of measurement uncertainty
R 50.1.103-2015: Risk management. Investment risk management process
R 50.1.109-2016: ILAC policy for uncertainty in calibration
R 50.2.096-2015: State system for ensuring the uniformity of measurements. Metrological criteria of conformity assessment of the object of technical regulation to the requirements of technical regulations and standards
RD 52.18.766-2012: Guidelines for the Radiation Examination of Environmental Components in Territories that Have Been Contacted by Radioactive Pollution Due to the Accident at the Chernobyl Nuclear Power Plant. NGO "Typhoon"
RD 52.24.509-2015: Internal quality control of hydrochemical information
RMG 129-2013: State system for ensuring the uniformity of measurements. Requirements to the specialists in the sphere of ensuring of measurements uniformity, working in the field of legal metrology (experts-metrologists)
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
