GOST R 55260.1.1-2013
ГОСТ Р 55260.1.1-2013
|
|
Hydro power plants. Part 1-1. Hydraulic structures of hydropower stations. General safety requirements
Гидроэлектростанции. Часть 1-1. Сооружения ГЭС гидротехнические. Требования безопасности
Status: Effective - Introduced for the first time. IUS 2-2015
The objects of technical regulation in this standard are hydraulic structures of hydraulic riverbed and pumped storage power plants, their design processes, including exploration, construction, operation, overhaul, reconstruction, conservation and liquidation, as well as the implementation of measures to prevent, localize and eliminate emergency situations caused by accidents. hydraulic structures of these power plants. This standard applies to: - concrete and reinforced concrete dams (gravity, buttress and arch); - earth dams and dams (ground bulk, ground alluvial, stone-earthen, and rock embankment); - culverts; - buildings of hydroelectric stations and pumped storage power plants; - water intake facilities and septic tanks; - conduits of closed cross section; - channels; - retaining walls; - fish crossing and fish protection facilities. This standard establishes general requirements for the safety of hydraulic structures at all stages of their life cycle, during which engineering surveys, design, construction, operation (including current repairs), reconstruction, major repairs, conservation and liquidation of structures are carried out. This standard does not apply to the safety of technological processes corresponding to the functional purpose of a hydraulic structure. At the same time, possible hazardous effects of these technological processes on the condition of facilities and their level of safety are taken into account
Объектами технического регулирования в настоящем стандарте являются гидротехнические сооружения гидравлических русловых и гидроаккумулирующих электростанций, процессы их проектирования, включая изыскания, строительства, эксплуатации, капитального ремонта, реконструкции, консервации и ликвидации, а также осуществления мероприятий по предупреждению, локализации и ликвидации чрезвычайных ситуаций, обусловленных авариями гидротехнических сооружений этих электростанций. Настоящий стандарт распространяется на: - бетонные и железобетонные плотины (гравитационные, контрфорсные и арочные); - грунтовые плотины и дамбы (грунтовые насыпные, грунтовые намывные, каменно-земляные и каменно-набросные); - водопропускные сооружения; - здания гидроэлектрических станций и гидроаккумулирующих электростанций; - водозаборные сооружения и отстойники; - водоводы замкнутого поперечного сечения; - каналы; - подпорные стены; - рыбопропускные и рыбозащитные сооружения. Настоящий стандарт устанавливает общие требования к безопасности гидротехнических сооружений на всех этапах их жизненного цикла, в течение которого осуществляются инженерные изыскания, проектирование, строительство, эксплуатация (в том числе текущие ремонты), реконструкция, капитальный ремонт, консервация и ликвидации сооружения. Настоящий стандарт не распространяется на безопасность технологических процессов, соответствующих функциональному назначению гидротехнического сооружения. При этом подлежат учету возможные опасные воздействия этих технологических процессов на состояние сооружений и уровень их безопасности
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
9/6/2013
SKU: RUSS73967
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
27 Power and heat engineering »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
4 Safety requirements for hydraulic structures »
4.3 Hydraulic structures of power facilities »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.1 Operation of industrial buildings and structures »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.140 Hydropower »
National standards »
27 ENERGY AND HEATING TECHNOLOGY »
27.140 Hydropower »
The Document References:
GOST 12.1.046-85: Occupational safety standards system. Building. Lighting of building sites
GOST 12.3.016-87: Occupational safety standards system. Building construction anticorrosive protective works. Safety requirements
GOST 12.4.059-89: Occupational safety standards system. Construction. Protective inventory safeguards. General specifications
GOST 12.4.087-84: Occupational safety standard system. Building. Building helmets. Specifications
GOST 12.4.107-82: Occupational safety standards system. Building. Safety ropes. General safety requirements
GOST 12071-2000: Soils. Sampling, packing, transportation and storage of samples
GOST 12248-2010: Soils. Laboratory methods for determining the strength and strain characteristics
GOST 12536-79: Soils. Methods of laboratory granulometric (grain-size) and microaggregate distribution
GOST 19912-2012: Soils. Field test methods: cone penetration test and dynamic probing
GOST 20276-2012: Soils. Field methods for determining the strength and strain characteristics
GOST 20522-2012: Soils. Methods of statistical treatment of test results
GOST 21.110-95: System of building design documents Rules of developing specifications for equipment, products and materials
GOST 21.112-87: System of design documentation for construction. Hoisting-and-conveying machinery. Symbols
GOST 21.113-88: System of design documentation for construction. Presentation of dimensional accuracy data
GOST 21.114-95: System of design documents for construction. Rules for execution of sketch drawings of general views of non-standard products
GOST 21.204-93: System of construction design documents. Graphical symbols and signs of elements of general layouts and transport structures
GOST 21.205-93: System of design documents for construction. Elements оf sanitary engineering systems - symbols
GOST 21.206-2012: System of design documents for construction. Symbols for presentation of pipelines
GOST 21.302-96: System of design documents for construction Graphic symbols for engineering geological investigation documents
GOST 21.401-88: System of design document for construction. Production technology. Main requirements to working drawings.
GOST 21.403-80: System of design documents for construction. Graphic symbols in diagrams. Power installations
GOST 21.404-85: System of design documents for construction. Industrial process automation. Instrumentation symbols for use in diagrams
GOST 21.408-93: System of design documents for construction. Rules of industrial process automation working documentation execution
GOST 21.501-2011: System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions
GOST 21.508-93: System of building design documents. Rules of fulfillment of working documentation of general layouts of enterprises, buildings and civil housing objects
GOST 21.513-83: System of building documents. Anticorrosive protection of building structures. Working drawings
GOST 21.607-82: System of building design documents. Electric lighting for industrial project site. Working drawings
GOST 21.611-85: System of building design documents. Centralized power supply control. Graphical and letter designation of the type and contents of information
GOST 21.613-88: System of building design documents. Power electrical equipment. Working drawings
GOST 21.614-88: System of design documents for construction. Graphic symbols of electrical equipment and wiring on plans
GOST 21.615-88: System of design documentation for construction. Drawings for hydro-technical structures. Rules of execution
GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
GOST 21780-2006: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation
GOST 22733-2002: Soils. Laboratory method for determination of maximum density.
GOST 23061-2012: Soils. Methods for radioisotope measurement of density and humidity
GOST 23161-2012: Soils. Method of laboratory determination of subsiding characteristics
GOST 23278-78: Soils. Fields methods of permeability tests
GOST 23615-79: System of ensuring accuracy of geometrical parameters in construction. Statistical analysis of accuracy
GOST 23616-79: System of ensuring of geometrical accuracy of parameters in construction. Control of accuracy
GOST 23740-79: Soils. Methods of laboratory determination of organic composition
GOST 24846-2012: Soils. Methods of measuring the strains of structures and building bases
GOST 24847-81: Soils. Determination methods of seasonable depth of freezing
GOST 25100-95: Soils. Classification
GOST 25358-2012: Soils. Field method of determining temperature
GOST 25584-90: Soils. Laboratory methods for determination of filtration factor
GOST 26262-84: Soils field methods for determining depth of thawing
GOST 26263-84: Soils. Laboratory method for determining thermal conductivity of frozen soils
GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General
GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements
GOST 26433.2-94: System of ensuring geometric parameters accuracy in building. Rules for measuring parameters of buildings and works
GOST 26607-85: System of ensuring of geometrical parameters accuracy in construction. Functional tolerances
GOST 27217-2012: Soils. Field method for determining of frost-heave specific tangential forces
GOST 27321-87: Demountable tubular scaffold for construction works. Specification.
GOST 28012-89: Demountable travelling stage. Specifications
GOST 28347-89: Rolling scaffold with movable working place. Specifications
GOST 28514-90: Construction geotechnics. Determination of soil density by volume displacement method
GOST 28622-2012: Soils. Laboratory method for determination of frost-heave degree
GOST 28984-2011: Modular coordination of construction dimensions. General.
GOST 30416-2012: Soils. Laboratory testing. General requirements
GOST 30672-2012: Soils. Field testing. General
GOST 5180-84: Soils. Laboratory methods for determination
GOST 5686-2012: Sоils. Fiеld tеst mеthоds bу рilеs
GOST R 12.3.048-2002: Occupational safety standards system. Building. Hydraulic excavation. Safety requirements
GOST R 21.1001-2009: System of design documents for construction. General principles
GOST R 21.1003-2009: System of design documents for construction. Registration and storage rules design documentation
GOST R 21.1101-2009: System of design documents for construction. Main requirements for design and working documents
GOST R 21.1709-2001: System of design documents for construction. Rules of executing of working documentation for irrigation system
GOST R 50849-96: Safety belts constructions. General specifications. Test methods
GOST R 51872-2002: Executive geodetic documentation in construction. Performance rules
GOST R 52085-2003: Formworks. General specifications
GOST R 52086-2003: Formworks. Terms and definitions
GOST R 53582-2009: Soils. Method of determination of thawing soil shear resistance
GOST R 53778-2010: Buildings and constructions. Rules of inspection and monitoring of the technical condition. General requirements
SNiP 11-02-96: Engineering surveying for construction. fundamentals
SNiP 12-03-2001: Labor safety in construction industry
SNiP 12-04-2002: Safety in construction. Part 2. Construction works
SNiP 2.06.07-87: Retaining walls, ship locks, fish ways, and fish-protection devices
SNiP 2.06.09-84: Hydrotechnical tunnels
SNiP 22-02-2003: Engineering protection of territories, buildings and facilities against hazardous geological processes. Basic provisions
SP 126.13330.2012: Survey operations in construction
SP 14.13330.2011: Construction in seismic regions.
SP 16.13330.2011: Steel structures
SP 20.13330.2011: Loads and impacts
SP 22.13330.2011: Buildings and structures foundations
SP 23.13330.2011: Foundation of hydraulic structures
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
SP 39.13330.2012: Rock fill dams
SP 40.13330.2012: Concrete and reinforced concrete dams
SP 41.13330.2012: Concrete and reinforced concrete hydraulic structures
SP 48.13330.2011: Organization of construction
SP 58.13330.2012: Hydraulic Structures. Basic statements
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
|
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
