GOST R 54826-2011
ГОСТ Р 54826-2011
|
|
Gas-fired central heating boilers. Type C boilers of nominal heat input not exceeding 70 kW
Котлы газовые центрального отопления. Котлы типа «С» с номинальной тепловой мощностью не более 70 кВт
Status: Effective - Introduced for the first time. IUS 9-2013
This standard includes requirements and test methods in terms of manufacturing, safety, suitability for intended use, and rational use of energy, as well as the classification and labeling of gas central heating boilers equipped with atmospheric burners, atmospheric blow burners or pre-mixed burners. This standard applies to type C boilers in accordance with 4.2: - boilers of types C1, C3 and C5, including chimneys for air supply and removal of combustion products and their terminals; - boilers of types C2 and C4, including their connecting chimneys, but without a system of shared chimneys (this system of shared ducts is part of the building); - type C6 boilers without any chimneys (these chimneys are approved and sold separately on the market); - boilers of type C7 up to the draft stabilizer / nozzle for supplying air, but without an auxiliary chimney; - boilers of type C8 with their own connecting chimneys, but without a chimney, which is part of the building, as well as boilers: - which are equipped with atmospheric burners, atmospheric burners with fan air supply for combustion or removal of combustion products, or burners that fully work on previously prepared mixtures; - which use one or more combustible gases corresponding to the three families of gases and pressures; - for which the rated thermal power (on the basis of lower calorific value) is not more than 70 kW; - for which the water temperature is not more than 95 ° C; - for which the maximum working pressure from the water side is not more than 0.6 MPa. This standard does not apply to: - boilers of types C41, C51, C61, C71 and C81; - boilers designed for installation in the open air; - condensing boilers; - boilers of combined type, for example, for central heating and domestic hot water
Настоящий стандарт включает требования и методы испытаний в части изготовления, безопасности, пригодности к использованию по назначению, и рационального использования энергии, а также - классификацию и маркировку газовых котлов центрального отопления, которые оснащены атмосферными горелками, атмосферными дутьевыми горелками или горелками с предварительным смешением. Настоящий стандарт распространяется на котлы типа С в соответствии с 4.2: - котлы типов С1, С3 и С5, включая дымоходы для подвода воздуха и отвода продуктов сгорания и их терминалы; - котлы типов С2 и С4, включая их присоединительные дымоходы, но без системы совместно используемых дымоходов (эта система совместно используемых воздуховодов является частью здания); - котлы типа С6 без каких-либо дымоходов (эти дымоходы утверждают и реализуют на рынке отдельно); - котлы типа С7 до стабилизатора тяги/патрубка для подвода воздуха, но без вспомогательной дымовой трубы; - котлы типа С8 со своими присоединительным дымоходами, но без дымовой трубы, которая является частью здания, а также котлы: - которые оснащены атмосферными горелками, атмосферными горелками с вентиляторной подачей воздуха для горения или отвода продуктов сгорания, или горелки, полностью работающие на предварительно подготовленной смеси; - которые используют один или более горючих газов, соответствующих трем семействам газов и давлениям; - для которых номинальная тепловая мощность (исходя из низшей теплоты сгорания) не более 70 кВт; - для которых температура воды не более 95 °C; - для которых максимальное рабочее давление со стороны воды не более 0,6 МПа. Настоящий стандарт не распространяется на: - котлы типов С41, С51, С61, С71 и С81; - котлы, предназначенные для установки на открытом воздухе; - котлы конденсационного типа; - котлы комбинированного типа, например, для центрального отопления и бытового горячего водоснабжения
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/13/2011
SKU: RUSS73973
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
91 Building materials and construction »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Soldering »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Electrodes »
Welding regulations »
Welding materials »
Gases »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
016/2011 TR CU. On safety of gaseous fuel machines »
Regulations and standards (to ТР ТС ТС 016/2011) »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.10 Central heating systems »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.10 Central heating systems »
The Document References:
GOST 12817-80: Cast grey iron flanges for Pnom from 0,1 to 1,6 MPa (from 1 to 16 kgf/sq sm). Design and dimensions
GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions
GOST 1412-85: Flakish graphite cast iron
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 19424-97: Cast zinc alloys in pigs. Specifications
GOST 19903-74: Hot-rolled steel sheets. Dimensions
GOST 24184-80: flanges on two tension hoops
Design and basic dimensions
GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 27570.0-87: Safety of household appliances and similar devices
GOST 6211-81: Conical pipe thread. Profile, basic dimensions and tolerances
GOST 6357-81: Basic norms of interchangeability pipe cylindrical thread
GOST 7.67-2003: System of standards of information, librarianship and publishing. Codes of names of countries
GOST IEC 60730-1-2011: Automatic electrical controls for household and similar use. Part 1. General requirements
GOST R 51842-2001: Automatic shut-off valves for gas burners and gas appliances. General technical requirements and test methods
GOST R 51843-2001: Flame supervision devices for gas burning appliances. Thermo-electric flame supervision devices. General technical requirements and test methods
GOST R 51982-2002: Gas appliances pressure governors for inlet pressure up to 20 kPa. General technical requirements and test methods
GOST R 51983-2002: Multifunctional controls for gas burning appliances. General technical requirements and test methods
GOST R 52161.1-2004: Safety of household and similar electrical appliances. Part 1. General requirements
GOST R 52219-2004: Automatic control systems for gas burners and gas burning appliances. General technical requirements and test methods
GOST R 52318-2005: Round copper tubes for water and gas. Specifications
GOST R 54824-2011: Pressure regulators and associated safety devices for gas appliances. Pressure regulators for inlet pressures up to and including 50 kPa
GOST R IEC 60730-1-2002: Automatic electrical controls for household and similar use. General requirements and test methods
GOST R ISO 4063-2010: Welding and allied processes. Nomenclature of processes and reference numbers
GOST R ISO 857-1-2009: Welding and allied processes. Vocabulary. Part 1. Metal welding processes. Terms and definitions
The Document is Referenced By:
Decision 86: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, as a result of which, on a voluntary basis, compliance with the requirements of the technical regulations of the Customs Union "On the safety of devices operating on gaseous fuel" (TR CU 016 / 2011), and the list of international and regional (interstate) standards, and in their absence - national (state) standards containing rules and methods of research (testing) and measurements, including sampling rules necessary for the application and fulfillment of requirements technical regulations of the Customs Union "On the safety of devices operating on gaseous fuel" (TR CU 016/2011) and the implementation of conformity assessment of objects of technical regulation
GOST R 56776-2015: The systems of preparation of consumer hot water-supply. Computational method of energy consumption and effectiveness
GOST R 56777-2015: Boiler installations. Computational method of energy consumption and effectiveness
SP 282.1325800.2016: Energy supply apartament of the buildings with the heat generation, working on gas fuel. Design rules and devices
SP 282.1325800.2023: Apartment heating systems based on individual gas heat generators. Design and construction rules
SP 402.1325800.2018: Residential buildings. Rules for the design of gas consumption systems
|
Customers Who Viewed This Item Also Viewed:
 |
Metals. Methods of tension test
Language: English |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
