GOST R ISO 10328-2007
ГОСТ Р ИСО 10328-2007
|
|
Prosthetics. Structural testing of lower-limb prostheses. Requirements and test methods
Протезирование. Испытания конструкции протезов нижних конечностей. Требования и методы испытаний
Status: Effective
This standard is suitable for assessing the compliance of lower limb prosthetic devices with the strength requirements set out in ISO 22523. This standard is not suitable for use as a guide for the designation of an individual prosthetic lower limb device of individual manufacture. This standard establishes static and cyclic strength tests for prosthetic devices of the lower extremities, in which complex loads are reproduced by applying a single test force. Complicated loads on the test specimen correspond to peak loads, which usually occur at different moments of the support phase when walking
Настоящий стандарт пригоден для оценки соответствия протезных устройств нижних конечностей требованиям прочности, установленным в ИСО 22523. Настоящий стандарт не пригоден для использования в качестве руководства при назначении конкретного протезного устройства нижней конечности индивидуального изготовления. Настоящий стандарт устанавливает статические и циклические испытания на прочность протезных устройств нижних конечностей, при которых сложные нагружения воспроизводят приложением единственной испытательной силы. Сложные нагрузки на испытываемый образец соответствуют пиковым значениям нагрузок, которые обычно возникают в различные моменты фазы опоры при ходьбе
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/27/2007
SKU: RUSS74047
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.2 Machines and equipment for special purposes »
4.13.2.11 Equipment and instruments for medical industry »
ISO classifier »
11 HEALTH »
11.180 Aids for persons with physical disabilities and injuries »
11.180.10 Aids and mobility aids »
National standards »
11 HEALTH »
11.180 Aids for persons with physical disabilities and injuries »
11.180.10 Aids and mobility aids »
National Standards for KGS (State Standards Classification) »
Latest edition »
R Health. Sanitation and hygiene items »
R2 Equipment and tools of medical institutions »
R23 Instruments, apparatus, accessories and equipment used in traumatology and orthopedics. Prostheses »
The Document is Replaced With:
GOST R ISO 10328-2021: Prostheses. Testing the design of lower limb prostheses. Requirements and test methods
As a Replacement Of:
GOST R ISO 10328-1-98: Prosthetics. Structural testing of lower-limb prostheses. Part 1. Test configurations
GOST R ISO 10328-2-98: Prosthetics. Structural testing of lower-limb prostheses. Part 2. Test samples
GOST R ISO 10328-3-98: Prosthetics. Structural testing of lower-limb prostheses. Part 3. Principal structural tests
GOST R ISO 10328-4-98: Prosthetics. Structural testing of lower-limb prostheses. Part 4. Loading parameters of principal structural tests
GOST R ISO 10328-5-98: Prosthetics. Structural testing of lower-limb prostheses. Part 5. Supplementary structural tests
GOST R ISO 10328-6-98: Prosthetics. Structural testing of lower-limb prostheses. Part 6. Loading parameters of supplementary structural tests
GOST R ISO 10328-7-98: Prosthetics. Structural testing of lower-limb prostheses. Part 7. Test submission document
GOST R ISO 10328-8-98: Prosthetics. Structural testing of lower-limb prostheses. Part 8. Test report
The Document References:
GOST R ISO 15032-2001: Prostheses. Structural testing of hip units
GOST R ISO 22523-2007: External limb prostheses and external orthoses. Requirements and test methods
The Document is Referenced By:
GOST R 51191-2007: Units of lower-limb prostheses. Technical requirements and test methods
GOST R 51191-2019: Nodes of prostheses of the lower extremities. Technical requirements and test methods
GOST R 53346-2009: Units of lower-limb orthoses. Technical requirements and test methods
GOST R 53868-2010: Units of lower-limb prostheses for children. Technical requirements and test methods
GOST R ISO 22523-2007: External limb prostheses and external orthoses. Requirements and test methods
GOST R ISO 22675-2009: Prosthetics. Testing of ankle-foot devices and foot units. Requirements and test methods
GOST R ISO 22675-2019: Prosthetics. Test ankle nodes and nodes of prosthetic feet of the lower extremities. Requirements and Test Methods
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
