GOST R IEC 61800-2-2012
ГОСТ Р МЭК 61800-2-2012
|
|
Adjustable speed electrical power drive systems. Part 2. General requirements. Rating specifications for low voltage adjustable frequency a.c. power drive systems
Системы силовых электроприводов с регулируемой скоростью. Часть 2. Общие требования. Номинальные технические характеристики низковольтных систем силовых электроприводов переменного тока с регулируемой частотой
Status: Effective - Introduced for the first time. IUS 2-2014
This standard applies to general-purpose adjustable ac drive systems powered from ac voltage up to 1000 V with a frequency of 50 or 60 Hz, which include a linear line voltage power converter into a motor supply line voltage up to 600 Hz, control devices and AC motors current. The standard does not apply to electric traction drives. This standard describes the characteristics of the converters and their relationship with the system of a complete AC drive, as well as their performance requirements for passport data, normal operation conditions, overload conditions, ability to withstand voltage surges, stability, protection, AC grounding and testing . In addition, recommendations are given on application, control strategies, diagnostics and system configuration.
Настоящий стандарт распространяется на системы регулируемых электроприводов переменного тока общего назначения, питающиеся от напряжения переменного тока до 1000 В частотой 50 или 60 Гц, включающие в себя силовой преобразователь линейного напряжения сети в линейное напряжение питания двигателя с частотой до 600 Гц, устройства управления и двигатели переменного тока. Стандарт не распространяется на тяговые электроприводы электрического транспорта. В настоящем стандарте рассмотрены характеристики преобразователей и их взаимосвязь с системой комплектного привода переменного тока, а также установлены требования к их рабочим характеристикам относительно паспортных данных, условий нормальной работы, условий перегрузки, способности выдержать скачки напряжения, устойчивости, защиты, заземления сети переменного тока и испытаний. Кроме того, даны рекомендации по применению, стратегии управления, диагностике и конфигурации системы
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
9/20/2012
SKU: RUSS74092
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.1 Electric machines, electrical equipment and materials »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.160 Electric rotating machines »
29.160.30 Engines »
National standards »
29 ELECTRICAL ENGINEERING »
29.160 Electric rotating machines »
29.160.30 Engines »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.200 Rectifiers. Converters. Stabilized power supplies »
National standards »
29 ELECTRICAL ENGINEERING »
29.200 Rectifiers. Converters. Stabilized power supplies »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E6 Electric machines, transformers and converters »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E6 Electric machines, transformers and converters »
E60 Classification, nomenclature and general rules »
The Document References:
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 29209-91: Semiconductor devices. Discrete devices and integrated circuits. Part 2. Rectifier diodes
GOST 29210-91: Semiconductor devices. Discrete devices. Part 3. Signal (including switching) and regulator diodes
GOST 29283-92: Semiconductor devices. Discrete devices and integrated circuits. Part 5. Optoelectronic devices
GOST 30830-2002: Power transformers. Part 1. General
GOST R 51317.2.4-2000: Electromagnetic compatibility of technical equipment. Electromagnetic environment. Compatibility levels for low-frequency conducted disturbances in industrial plants
GOST R 51317.4.7-2008: Electromagnetic compatibility of technical equipment. General guide on harmonics and interharmonics measuring instruments and measurement, for power supply systems and equipment connected thereto
GOST R 52776-2007: Rotating electrical machines. Rating and performance
GOST R 53148-2008: Rotating electrical machines. Noise limits
GOST R IEC 60034-2-1-2009: Rotating electrical machines. Part 2-1. Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
GOST R IEC 60204-1-2007: Safety of machinery. Electrical equipment of machines and mechanisms. Part 1. General requirements
The Document is Referenced By:
GOST 33807-2016: Safety of attractions. General requirements
GOST R IEC 61800-5-2-2015: Adjustable speed electrical power drive systems. Part 5-2. Functional safety requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
