imgalt

GOST 20365-74

ГОСТ 20365-74

Broaches round of variable cutting of diameters from 14 to 90 mm. Design and dimensions

Протяжки круглые переменного резания диаметром от 14 до 90 мм. Конструкция и размеры

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Decree of the State Standard No. 2923 of 01.10.81

The standard applies to broach universal purpose variable cutting, flat resistant draft and finishing parts, designed for machining cylindrical holes with diameters from 14 to 90 mm

Стандарт распространяется на протяжки универсального назначения переменного резания, ровной стойкой черновой и чистовой частей, предназначенные для обработки цилиндрических отверстий диаметром от 14 до 90 мм

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 12/17/1974

SKU: RUSS74146

Price: $2,286.00



imgalt

The Product is Contained in the Following Classifiers:

ISO classifier » 25 MECHANICAL ENGINEERING » 25.100 Cutting tools » 25.100.25 Cutting tools for planing and broaching machines »

National standards » 25 MECHANICAL ENGINEERING » 25.100 Cutting tools » 25.100.25 Cutting tools for planing and broaching machines »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G2 Industrial tools and accessories » G23 Tools for machining »

National Standards for OKSTU » TOOL, TECHNOLOGICAL TOOLING, ABRASIVE MATERIALS » Broaches »


The Document References:

GOST 1050-74: High-grade constructional carbon steel

GOST 1215-79: Malleable iron castings

GOST 14034-74: Centre holes. Dimensions

GOST 1412-85: Flakish graphite cast iron

GOST 1414-75: Construction steel with enhanced and high machinability

GOST 14959-79: Spring carbon and alloy steel bars. Specifications

GOST 15527-70: Copper zinc pressure treated alloys (brasses). Types

GOST 1585-85: Bearing cast iron for molding

GOST 18175-78: Tin-free pressure-worked bronzes. Grades

GOST 19265-73: Bars and strips out of high-speed steel. Specifications

GOST 2685-75: Aluminium casting alloys. Marks, technical requirements and test methods

GOST 4044-70: Round shanks for broaches. Types and main dimensions

GOST 4543-71: Structural alloyed steel

GOST 4784-74: Wrought aluminium and aluminium alloys. Grades

GOST 5017-74: Wronght tin bronze. Grades

GOST 801-78: Bearing steel. Specifications

GOST 9126-76: Straight lines for cylindrical holes. Technical requirements

The Document is Referenced By:

GOST 18217-90: Key broaches. Design

GOST 18218-90: Thick cored key broaches. Design

GOST 18219-90: Flat teeth key broaches. Design

GOST 18220-90: Key broaches for higher class roughness. Design

GOST 20364-74: Round broaches of variable cutting of diameters from 10 to 13 mm. Design and dimensions

GOST 24818-81: Broaches combined for b-slitting holes with straight side profile and centring at outside diameter, alternatives. Design and dimensions

GOST 24819-81: Broaches combined for 6-slitting holes with straight side profile and centring at outside diameter, alternatives. Double driven. Design and dimensions

GOST 24820-81: Broaches combined for 8-slitting holes with straight side profile and centring at outside diameter, alternatives. Design and dimensions

GOST 24821-81: Broaches combined for 8-slitting holes with straight side profile and centring at outside diameter, alternatives. Double driven. Design and dimensions

GOST 24822-81: Broaches combined for 10-slitting holes with straight side profile and centring at outside diameter, alternatives. Design and dimension

GOST 24823-81: Broaches combined for 10-slitting holes with straight side profile and centring at outside diameter, alternatives. Double driven. Design and dimensions

GOST 25157-82: Broaches with diameter 12 and 14 mm for slitting holes with involute profile and centring at outside diameter with module 1 mm double driven. Construction and dimensions

GOST 25158-82: Broaches with diameter from 15 to 90 mm for slitting holes with involute profile and centring at outside diameter with module from 1 to 2,5 mm. Construction and dimensions

GOST 25159-82: Broaches with diameter from 15 to 90 mm for slitting holes with involute profile and centring at outside diameter with module from 1 to 2,5 mm, double driven. Construction and dimensions

GOST 25160-82: Broaches with diameter from 45 to 90 mm for slitting holes with involute profile and centring at outside diameter with module from 3 to 5 mm. Construction and dimensions

GOST 25161-82: Broaches with diameter from 70 to 90 mm for slitting holes with involute profile and centring at outside diameter with module from 3,5 to 5 mm. Double driven. Construction and dimensions

GOST 25969-83: Combined alternative broaches for 6 slitting holes with straight side profile and centring at inside diameter. Design and dimensions

GOST 25971-83: Combined alternative broaches for 8 slitting holes with straight side profile and centring at internal diameter. Design and dimensions

GOST 25972-83: Combined alternatives double driven broaches for 8 slitting holes with straight side profile and centring at internal diameter. Design and dimensions

GOST 25973-83: Combined alternatives broaches for 10 slitting holes with straight side profile and centring at internal diameter. Design and dimensions

GOST 25974-83: Combined alternatives double driven broaches for 10 slitting holes with straight side profile and centring at internal diameter. Design and dimensions

GOST 26479-85: Double-pass square broaches for holes with sides from 12,5 to 60 mm. Design and dimensions

GOST 26480-85: Square broaches for holes with sides from 25 to 41 mm. Design and dimensions

GOST 28044-89: Internal broaches for straight splines based at internal diameter one pass combined type. Construction

GOST 28045-89: Internal broaches for straight splines based at internal diameter double pass combined type. Construction

GOST 28046-89: Internal broaches for straight splines based at internal diameter three pass combined type. Construction

GOST 28047-89: Internal broaches for straight splines based at internal diameter four pass combined type. Construction

GOST 28048-89: Broaches with diameter from 50 to 120 mm for slitting holes with involute profile with round tail and centring at outside diameter with module from 1,5 to 2,5 mm. Construction

GOST 28049-89: Broaches with diameter from 90 to 120 mm for slitting holes with involute profile with round tail and centring at outside diameter with module from 2,5 mm. Construction

GOST 28050-89: Broaches with diameter from 55 to 130 mm for slitting holes with involute profile with round tail and centring at outside diameter with module from 3 to 5 mm. Construction

GOST 28051-89: Broaches with diameter from 70 to 130 mm for slitting holes with involute profile with round tail and centring at outside diameter with module from 3 to 5 mm. Construction

GOST 28442-90: Broaches for cylindrical, slitting and polyhedral profile holes. Specifications

GOST R 50035-92: Combined broaches with diameter from 50 to 120 mm for slitting holes with involute profile with wind round tail and centring at outside diameter with module from 1,5 to 2,5 mm. Construction

GOST R 50036-92: Combined broaches with diameter from 90 to 120 mm for slitting holes with involute profile with wind round tail and centring at outside diameter with module from 2,5 mm. Construction

GOST R 50037-92: Combined broaches with diameter from 55 to 130 mm for slitting holes with involute profile with wind round tail and centring at outside diameter with module from 3 to 4 mm. Construction

GOST R 50038-92: Combined broaches with diameter from 55 to 130 mm for slitting holes with involute profile with wind round tail and centring at outside diameter with module from 3 to 5. Construction

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English
Price: $634.00
imgalt
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English
Price: $87.00
imgalt
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English
Price: $71.00
imgalt
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English
Price: $139.00
imgalt
Ice cream. General technical requirements
Language: English
Price: $162.60
imgalt
Pipe fittings. Ball valves made of brass. General specifications
Language: English
Price: $398.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!