GOST R 55716-2013
ГОСТ Р 55716-2013
|
|
High-voltage switchgear. General specifications
Коммутационная аппаратура высокого напряжения. Общие технические условия
Status: Effective - Introduced for the first time. IUS 2-2015
This standard applies to alternating current switching equipment for voltages above 1000 V, intended for indoor and outdoor use. This standard applies to all high-voltage switching equipment, unless otherwise indicated in the relevant standards for a specific type of switching equipment.
Настоящий стандарт распространяется на коммутационную аппаратуру переменного тока на напряжение свыше 1000 В, предназначенную для внутренней и наружной установки. Настоящий стандарт распространяется на всю коммутационную аппаратуру высокого напряжения, если нет иных указаний в соответствующих стандартах для определенного типа коммутационной аппаратуры
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/8/2013
SKU: RUSS74179
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.1 Electric machines, electrical equipment and materials »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.080 Insulation »
National standards »
29 ELECTRICAL ENGINEERING »
29.080 Insulation »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.080 Insulation »
29.080.01 Electrical insulation in general »
National standards »
29 ELECTRICAL ENGINEERING »
29.080 Insulation »
29.080.01 Electrical insulation in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E0 General rules and regulations for electrical and heat engineering »
E09 Test methods. Packaging. Marking »
The Document References:
GOST 10434-82: Electric contact connections. Classification. General technical requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.007.3-75: Occupational safety standard system. Electrotechnical devices for voltage more than 1 000 v
GOST 12969-67: Plates for machines and devices. Technical requirements
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 14192-96: Cargo marking
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15543.1-89: Electrical articles. General requirements for environmental climatic aspects stability
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 16962.1-89: Electrical articles. Test methods as to environments climatic factors resistance
GOST 16962.2-90: Electrotechnical product
GOST 17441-84: Electrical contact connections. Acceptance and methods of tests
GOST 17512-82: Electric equipment and installations for 3 kV and higher. Measuring methods during high - voltage tests
GOST 17516.1-90: Electrical articles. General requirement for environment mechanical stability
GOST 1983-2001: Voltage transformers. General specifications
GOST 21130-75: Electrical articles. Grounding terminals and grounding signs
GOST 23941-2002: Noise of machines. Methods for determination of noise characteristics. General requirements
GOST 30546.1-98: General requirements for machines, instruments and other industrial products and calculation methods for their complex structures as to seismic stability
GOST 30546.2-98: Seismic stability tests for machines, instruments and other industrial products. General guidance and test methods
GOST 6827-76: Electrical equipment and receivers of electric energy. Series of nominal currents
GOST 7746-2001: Current transformers. General specifications
GOST 8024-90: Alternating current apparatus and devices for voltages above 1000 V. Temperature rise at continuous duty. Norms and test methods
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9920-89: A.c. electrical installations for voltage from 3 to 750 kV. Creepage distance of external insulation
GOST R 51317.4.1-2000: Electromagnetic compatibility of technical equipment. Immunity tests. Test procedures.
GOST R 51317.4.17-2000: Electromagnetic compatibility of technical equipment. Immunity to d.c. power voltage ripples. Requirements and test methods
GOST R 51317.6.5-2006: Electromagnetic compatibility of technical equipment. Immunity of technical equipment intended for use in power stations and substations. Requirements and test methods
GOST R 51318.11-2006: Electromagnetic compatibility of technical equipment. Industrial, scientific, medical and domestic (ISMD) high-frequency equipment. Radio disturbance. Limits and methods of measurement
GOST R 51369-99: Climatic environment stability test methods machines, instruments and other industrial products. Test for influence of humidity
GOST R 51732-2001: Input-distributional boards for dwellings and public buildings. General specifications
GOST R 52034-2008: Ceramic support insulators for voltage over 1000 V. General specifications
GOST R 52565-2006: Alternating-current circuit-breakers for voltages from 3 to 750 kV. General specifications
GOST R 52726-2007: Alternating current disconnectors and earthling switches for voltage above 1 kV and operating mechanisms for them. General specifications
GOST R 52735-2007: Short-circuits in electrical installations. Calculation methods in alternating current electrical installations with voltage above 1 kV
GOST R 54331-2011: Fluids for electrotechnical applications. Unused mineral insulating oils for transformers and switchgear. Specifications
GOST R 55194-2012: Electrical equipment and installation for a.c. voltages from 1 to 750 kV. General methods of dielectric tests
GOST R 55195-2012: Electrical equipment and installations for a.c. voltages from 1 up to 750 kV. Requirements for dielectric strength of insulation
GOST R IEC 60068-2-1-2009: Environmental testing. Part 2-1.Tests. Test A: Cold
GOST R IEC 60068-2-2-2009: Environmental testing. Part 2-2. Tests. Test B: Dry heat
GOST R IEC 60068-2-30-2009: Environmental testing. Part 2-30. Tests. Test Db: Damp heat, cyclic (12 h + 12 h cycle)
PB 03-576-03: Regulations of design and safe operation of pressure vessels
RD 50-725-93: Guidelines. Electromagnetic compatibility of technical equipment. Industrial interference from overhead power lines and high-voltage equipment. Measurement methods and standard setting procedure
The Document is Referenced By:
GOST R 58604-2019: Unified energy system and isolated energy systems. Thermal power plants. Automated process control systems. Terms of creation. Norms and Requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Metals. Methods of tension test
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
