GOST 32388-2013

ГОСТ 32388-2013

Process piping. Standard for the stress, vibration and seismic analysis

Трубопроводы технологические. Нормы и методы расчета на прочность, вибрацию и сейсмические воздействия

Status: Effective - Introduced for the first time. IUS 12-2014

This standard applies to technological pipelines operating under internal pressure, vacuum or external pressure, from carbon and alloyed steels, non-ferrous metals (aluminum, copper, titanium and their alloys) with an operating temperature of minus 269 ° C to plus 700 ° C wall thickness to outside diameter

Настоящий стандарт распространяется на трубопроводы технологические, работающие под внутренним давлением, вакуумом или наружным давлением, из углеродистых и легированных сталей, цветных металлов (алюминия, меди, титана и их сплавов) с рабочей температурой от минус 269 °С до плюс 700 °С при отношении толщины стенки к наружному диаметру

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 115

Approved: Federal Agency for Technical Regulation and Metrology, 4/3/2014

SKU: RUSS74273

Price: $628.65




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 75 Extraction and processing of oil, gas and related production »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Welding materials »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Welding work » Automatic welding »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Main materials » Non-ferrous metals »

Welding regulations » Main materials » Polymers »

Welding regulations » Welding materials » Electrodes »

Welding regulations » Welding materials » Gases »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 032/2013 TR CU. On safety of overpressure equipment » Regulations and standards (to 032/2013 TR CU) »

Standards for pipe fittings (TPA) » 11. Piping valves (TPA) tests » 11.3 Additional test procedures » 11.3.2 Seismic and vibration resistance tests, noise measurement »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.2 Machines and equipment for special purposes » 4.13.2.4 Machines and equipment for mining, oil industry and quarrying »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.180 Equipment for oil and gas industry » 75.180.20 Equipment for oil and gas processing »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.180 Equipment for oil and gas industry » 75.180.20 Equipment for oil and gas processing »


The Document References:

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination

GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces

GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements

GOST 12817-80: Cast grey iron flanges for Pnom from 0,1 to 1,6 MPa (from 1 to 16 kgf/sq sm). Design and dimensions

GOST 12818-80: Cast malleable iron flanges for Pnom from 1,6 to 4,0 MPa (from 16 to 40 kgf/cm2). Design and dimensions

GOST 12819-80: Cast steel flanges for Pnom from 1,6 to 20,0 MPa (from 16 to 200 kgf/sq sm). Design and dimensions

GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions

GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions

GOST 12822-80: Steel loose flanges with welded ring for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/sq sm). Design and dimensions

GOST 25.101-83: Strength calculation and testing. Representation of random loading of machine elements and structures and statistical evaluation of results

GOST 30546.1-98: General requirements for machines, instruments and other industrial products and calculation methods for their complex structures as to seismic stability

The Document is Referenced By:

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 34609-2019: Ball valves and taps with cone closing element with manual control for gas installations in buildings

GOST R 58367-2019: Arrangement of oil fields on land. Technological design

SP 402.1325800.2018: Residential buildings. Rules for the design of gas consumption systems

Customers Who Viewed This Item Also Viewed:

Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Steering gears. Industrial purity requirements.
Language: English
Price: $1,375.40
Pipeline valves. Leakage rates of valves.
Language: English
Price: $198.99
Pipeline valves. Swing and lift check valves. General specifications
Language: English
Price: $202.95
Pipelines valves. Jackets of oval, octagonal section, lens steel for valves flanges. Design, dimension and general technical requirements
Language: English
Price: $57.42
Heat-resistant spiral-wound gaskets. Types. Main dimensions
Language: English
Price: $79.20
Slinging arrangements for vessels and apparatus. Specifications
Language: English
Price: $217.80
Electrical apparatus for explosive gas atmospheres. Part 20. Data for flammable gases and vapours, relating to the use of electrical apparatus
Language: English
Price: $180.08
Rolling bearings. Static load rating
Language: English
Price: $237.60
Medical instruments, apparatus and equipment. General specifications
Language: English
Price: $286.95
Electromagnetic compatibility of technical equipment. Immunity tests. General introduction
Language: English
Price: $435.60
Insulated bushings for alternating current rated voltages above 1000 V. Common specifications
Language: English
Price: $319.08
High-pressure welded steel vessels. General technical requirements
Language: English
Price: $763.29
Rolling bearings. Dynamic load ratings and rating life
Language: English
Price: $358.48
Safety manual “recommendations for the design and safe operation of the process pipelines”
Language: English
Price: $644.67
Technical regulations of Customs Union. On the safety of agricultural and forestry tractors and trailers
Language: English
Price: $98.40
Petroleum and natural gas industries. Shell-and-tube heat eхchangers. Technical requirements
Language: English
Price: $175.23
Mineral fertilizers. Method for determination of granules static strength
Language: English
Price: $69.84
Sulphur for industrial use. Sampling and preparation of samples
Language: English
Price: $44.55

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!