GOST R 55990-2014
ГОСТ Р 55990-2014
|
|
Oil and gas-oil fields. Field pipelines. Design codes
Месторождения нефтяные и газонефтяные. Промысловые трубопроводы. Нормы проектирования
Status: Effective - Introduced for the first time. IUS 3-2015
This standard applies to newly constructed and reconstructed field steel pipelines with a nominal diameter of up to DN 1400 inclusive with an overpressure of no more than 32.0 MPa of gas, gas condensate and oil fields and underground gas storage
Настоящий стандарт распространяется на вновь строящиеся и реконструируемые промысловые стальные трубопроводы номинальным диаметром до DN 1400 включительно с избыточным давлением среды не выше 32,0 МПа газовых, газоконденсатных и нефтяных месторождений и подземных хранилищ газа
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
4/1/2014
SKU: RUSS74286
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
75 Extraction and processing of oil, gas and related production »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Mechanized welding »
Welding regulations »
Welding work »
Automatic welding »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Electrodes »
Welding regulations »
Welding materials »
Fluxes »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
4 Ensuring environmental safety during subsoil use »
4.2 Use and protection of subsoil »
4.2.4 Environmental safety requirements in design, installation and operation of submarine cables and pipelines »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
75.200.01 Transportation and storage in general »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
75.200.01 Transportation and storage in general »
The Document References:
GOST 1412-85: Flakish graphite cast iron
GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 25100-2011: Soils. Classification
GOST 26251-84: Galvanium anodes for corrosion protection. Specifications
GOST 26775-97: Clearances of navigable bridge spans in the inland waterways. Norms and technical requirements
GOST 30732-2006: Steel pipes and shaped products with foamed polyurethane thermal insulation in protective sheath. Specifications.
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.039-74: Unified system of corrosion and ageing protection. Corrosive aggressiveness of atmosphere
GOST 9.502-82: Unified system of corrosion and ageing protection. Inhibitors of metals corrosion for aqueous systems. Methods of corrosion tests
GOST 9.506-87: Unified system of corrosion and ageing protection. Corrosion inhibitors of metals in water-petroleum environments. Methods of protective ability evaluation
GOST 9.514-99: Unified system of corrosion and ageing protection. Corrosion inhibitors of metals for water systems. Electrochemical method protective ability evaluation
GOST 9.905-82: Unified system of corrosion and ageing protection. Corrosion test methods. General requirements
GOST 9238-2013: Construction and rolling stock clearance diagrams
GOST 9238-83: Construction and rolling stock clearance diagrams for the USSR railways of 1520 (1524) mm gauge.
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection
GOST R 53580-2009: Steel pipes for crafts pipelines. Specifications
GOST R 54257-2010: Reliability of the constructions and foundations. Basic principles and requirements
GOST R 9.905-2007: Unified system of corrosion and ageing protection. Corrosion test methods. General requirements
PB 08-624-03: Safety Regulations for oil and gas industry
RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994
SanPiN 2.2.1/2.1.1.1200-03: Sanitary-protective zones and sanitary classification of enterprises, constructions and other objects
SNiP 11-02-96: Engineering surveying for construction. fundamentals
SNiP 32-01-95: Railroads with 1520-mm Track. Construction Norms and Regulations
SP 14.13330.2011: Construction in seismic regions.
SP 16.13330.2011: Steel structures
SP 18.13330.2011: Master plans for industrial enterprises
SP 20.13330.2011: Loads and impacts
SP 22.13330.2011: Buildings and structures foundations
SP 25.13330.2012: Soil bases and foundations on permafrost soils
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
SP 32.13330.2012: Sewerage. Pipelines and wastewater treatment plants
SP 34-116-97: Instructions For Design, Construction and Redesign of Field Oil and Gas Pipelines
SP 47.13330.2012: Engineering survey for construction. Basic principles
VSN 51-3-85: Design of field steel pipelines
The Document is Referenced By:
GOST 34068-2017: Gas supply system. Natural gas production. Field pipelines. Mechanical safety. Pressure and leak tests
GOST R 57955-2017: Buildings and facilities for oil and gas producing industries. Design standards
GOST R 58367-2019: Arrangement of oil fields on land. Technological design
SP 125.13330.2012: Petroleum product pipelines laid through cities and public areas
SP 36.13330.2012: Trunk pipelines
SP 366.1325800.2017: Field pipelines. Grade of design based on the risk analysis
SP 392.1325800.2018: Pipelines trunk and field for oil and gas. Executive documentation during construction. Forms of requirements for maintenance and execution
SP 393.1325800.2018: Pipelines trunk and field for oil and gas. Organization of construction production
SP 406.1325800.2018: Steel and field pipelines for oil and gas. Installation work. Welding and control of its implementation
SP 410.1325800.2018: Pipelines trunk and field for oil and gas. Permafrost construction and work control
SP 411.1325800.2018: Pipelines trunk and field for oil and gas. Tests before the delivery of constructed facilities
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.