GOST R IEC 60079-0-2011
ГОСТ Р МЭК 60079-0-2011
|
|
Explosive atmospheres. Part 0. Equipment. General requirements
Взрывоопасные среды. Часть 0. Оборудование. Общие требования
Status: Not effective - Canceled. Registration information 733-st dated 06/17/2015 (the official website of Rosstandart); IUS 2-2016
This standard establishes general requirements for the design, testing and labeling of equipment and Ex-components for use in explosive atmospheres.
Настоящий стандарт устанавливает общие требования по конструированию, испытанию и маркировке оборудования и Ех-компонентов, предназначенных для использования во взрывоопасных средах. При использовании в тексте настоящего стандарта термина «оборудование» подразумевается, что он относится в равной степени как к электрическому (электрооборудование), так и неэлектрическому оборудованию, предназначенному для работы во взрывоопасных средах. Если не указано иное в одном из стандартов на взрывозащиту конкретных видов, дополняющих настоящий стандарт, электрооборудование, соответствующее настоящему стандарту, предназначено для применения во взрывоопасных средах при нормальных атмосферных условиях: - температуре от минус 20 град. С до плюс 60 град. С; - давлении от 80 кПа (0,8 бар) до 110 кПа (1,1 бар); - содержании кислорода в воздухе примерно 21 % по объему
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
9/15/2011
SKU: RUSS74293
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
012/2011 TR CU. On safety equipment for work in explosive environments »
Regulations and standards (to TR CU 012/2011) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.10 Operation of electrical installations, electrical equipment and power tools »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.1 Electric machines, electrical equipment and materials »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.260 Electrical equipment for working in special conditions »
29.260.20 Electrical equipment for an explosive atmosphere »
National standards »
29 ELECTRICAL ENGINEERING »
29.260 Electrical equipment for working in special conditions »
29.260.20 Electrical equipment for an explosive atmosphere »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E0 General rules and regulations for electrical and heat engineering »
E02 Norms of calculation and design »
National Standards for OKSTU »
ELECTRICAL EQUIPMENT AND MATERIALS »
General rules and regulations »
As a Replacement Of:
GOST R 52350.0-2005: Electrical apparatus for explosive gas atmospheres. Part 0. General requirements
GOST R IEC 60079-0-2007: Explosive atmospheres. Part 0. Equipment. General requirements
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10605-94: Hexagon nuts with thread diameter over 48 mm. Product grade B. Specifications
GOST 11074-93: Hexagonal socket flat-point set screws. Product grades A and B. Specifications
GOST 11075-93: Hexagonal socket dog-point set screws. Product grades A and B. Specifications
GOST 11262-80: Plastics. Tensile strength test method.
GOST 11284-75: Through holes for fasteners. Dimensions
GOST 11738-84: Hexagon socket head cap screws, accuracy class A. Construction and dimensions
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 1481-84: Hexagon-head dog-point set screws. Product grades A and B. Construction and dimensions
GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits
GOST 17494-87: Rotating electrical machines. Classification of degrees of protection provided by enclosures for rotating machines
GOST 21341-75: Plastics and ebonite. Method of determining the Martens heat resistance temperature
GOST 22782.3-77: Explosion-proof electrical equipment with special means
GOST 25347-82: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits
GOST 27174-86: Open-type alkaline nickel-cadmium rechargeable cells and storage batteries of capacity up to 150 a/h
GOST 28963-91: Hexagon socket button head screws. Metric series. Specifications
GOST 28964-91: Hexagon socket set screws with cup point. Specifications
GOST 4647-80: Plastics. Method for determination of Charpy's impact strength
GOST 4648-71: Plastics. Method of static bending test
GOST 5915-70: Hexagon nuts, product grade B. Construction and dimensions
GOST 5927-70: Hexagon nuts (high precision). Construction and dimensions
GOST 7795-70: Hexagon reduced bead bolts with guide neck product grade B. Construction and dimensions.
GOST 7796-70: Hexagon reduced head bolts product grade B. Construction and dimensions
GOST 7798-70: Hexagon bolts, product grade B. construction and dimensions
GOST 7805-70: Hexagon bolts, product grade A. Construction and dimensions
GOST 8724-2002: Basic norms of interchangeability. Metric screw threads. General plan
GOST 8878-93: Hexagonal socket cone-point set screws. Product grades A and B. Specifications
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 50030.1-2007: Low-voltage switchgear and controlgear. Part 1. General rules
GOST R 50793-95: Hexagon head bolts with thread to head, product grades A and B. Specifications
GOST R 50796-95: Hexagon head bolts, product grades A and B. Specifications
GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements
GOST R 51330.5-99: Explosion-proof electrical equipment. Part 4. Method for determining the self-ignition temperature
GOST R 52350.0-2005: Electrical apparatus for explosive gas atmospheres. Part 0. General requirements
GOST R 52350.1.1-2006: Electrical apparatus for explosive gas atmospheres. Part 1-1. Flameproof enclosures 'd'. Method of testing for ascertainment of maximum experimental safe gap
GOST R 52350.15-2005: Electrical apparatus for explosive gas atmospheres. Part 15. Construction, tests and marking of type of protection "n" electrical apparatus
GOST R 52350.26-2007: Explosive atmospheres. Part 26. Equipment with equipment protection level (EPL) Ga
GOST R 52350.28-2007: Explosive atmospheres. Part 28. Protection of equipment and transmission systems using optical radiation
GOST R 52350.5-2006: Electrical apparatus for explosive gas atmospheres. Part 5. Powder filling 'q'
GOST R 52350.6-2006: Electrical apparatus for explosive gas atmospheres. Part 6. Oil-immersion 'o'
GOST R 52350.7-2005: Electrical apparatus for explosive gas atmospheres. Part 7. Increased safety 'e'
GOST R 52776-2007: Rotating electrical machines. Rating and performance
GOST R 53165-2008: Lead-acid storage starter batteries for motor-tractors. General specifications
GOST R IEC 60050-426-2006: International electrotechnical vocabulary. Chapter 426. Electric equipment for explosive atmospheres
GOST R IEC 60079-0-2007: Explosive atmospheres. Part 0. Equipment. General requirements
GOST R IEC 60079-11-2010: Explosive atmospheres. Part 11. Intrinsic safety circuit «i»
GOST R IEC 60079-1-2008: Explosive atmospheres. Part 1. Equipment protection by flameproof enclosures 'd'
GOST R IEC 60079-14-2008: Explosive atmospheres. Part 14. Electrical installations design, selection and erection
GOST R IEC 60079-18-2008: Explosive atmospheres. Part 18. Equipment protection by encapsulation «m»
GOST R IEC 60079-2-2009: Explosive atmospheres. Part 2. Equipment protection by pressurized enclosure 'p'
GOST R IEC 60079-25-2008: Explosive atmospheres. Part 25. Intrinsically safe systems
GOST R IEC 60079-30-1-2009: Explosive atmospheres. Electrical resistance trace heating. Part 30-1. General technical requirements and test methods
GOST R IEC 60079-35-1-2011: Caplights for use in mines susceptible to firedamp. Part 1. General requirements and test methods in relation to the risk of explosion
GOST R IEC 60086-1-2010: Primary batteries. Part 1. General
GOST R IEC 60622-2002: Alkaline secondary cells and batteries. Sealed nickel-cadmium prismatic rechargeable single cells
GOST R IEC 60622-2010: Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-cadmium prismatic rechargeable single cell
GOST R IEC 61056-1-99: Portable lead-acid cells and batteries (valve-regulated types). Part 1. General requirements, functional characteristics. Methods of test
GOST R IEC 61241-2-1-99: Electrical apparatus for use in the presence of combustible dust. Part 2. Test methods. Section 1. Methods for determining the minimum ignition temperatures of dust
GOST R IEC 61241-2-2-99: Electrical apparatus for use in the presence of combustible dust. Part 2. Test methods. Section 2. Method for determining the electrical resistivity of dust in layers
GOST R IEC 61436-2004: Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-metal hydride rechargeable single cells
GOST R IEC 61951-1-2004: Secondary cells and batteries containing alkaline or other non-acid electrolytes. Portable sealed rechargeable single cells. Part 1. Nickel-cadmium
GOST R IEC 86-1-96: Primary batteries. Part 1. General
The Document is Referenced By:
GOST R 52350.29.4-2011: Explosive atmospheres. Part 29-4. Gas detectors. General technical requirements and test methods of open path detectors for flammable gases
GOST R 53737-2009: Petroleum and natural gas industries. Reciprocating compressors. General technical requirements
GOST R 54370-2011: Explosive atmospheres. Quality management system of requirement manufacturer. Requirements
GOST R 54413-2011: Rotating electrical machines. Part 30. Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)
GOST R 54466-2011: Rotating electrical machines. Asynchronous explosion-proof motors of power from 0,25 to 400 kW inclusive. General technical requirements and test methods
GOST R 54776-2011: Occupational safety standards system. Equipment and facilities for prevention and localization explosions of dust-air mixtures in coal mines dangerous on gas and dust. General technical requirements. Safety requirements and test methods
GOST R 54777-2011: Automatic systems for explosions localization and suppression of methane-dust-air mixture explosions in coal mines. General technical requirements. Test methods
GOST R 54802-2011: Petroleum and natural gas industries. Packaged reciprocating gas compressor. Technical requirements
GOST R 54988-2012: Explosive atmospheres. Technical requirements and test methods for endurance to environmental factors influencing the peculiarities of operation of equipment in explosive atmospheres
GOST R 55026-2012: Design of fans working in potentially explosive atmospheres
GOST R 55153-2012: The mountain-mine equipment. Underground loading-transport machines. The safety requisitions and test methods
GOST R 55154-2012: Equipment mountain-mine. Systems of safety of the coal mines multifunctional. General technical requirements
GOST R 55158-2012: Mining equipment. Haulage and shunting mining winches. General technical requirements and test methods
GOST R 55159-2012: The mountain-mine equipment. Underground loading machines. General technical requirements and test methods
GOST R 55163-2012: Mining equipment. Underground self-propelled cars. Safety requirements and test methods
GOST R 55164-2012: Mining equipment. Movable mine compressor stations. Safety requirements and test methods
GOST R 55393-2012: Gas turbine power plant. Safety requirements
GOST R 55604-2013: Switching surges from protective systems. Switching surges protection devices of coal mines underground electrical networks. Specifications and test methods
GOST R 55730-2013: Mining equipment. Loading-transport machines. General technical requirements
GOST R 56102.2-2015: Centralized security monitoring systems. Part 2. Subsystem for mounting at protected facility. General technical requirements and test methods
GOST R 56141-2014: Mining equipment. Multipurpose safety systems for coal mines. System of implosion protection of the mountain making. General technical requirements
GOST R 56352-2015: Petroleum and natural gas industries. Production, storage and handling of liquefied natural gas. General safety requirements
GOST R 57052-2016: Mining equipment. Automatic fire fighting systems (for mining). General technical requirements and test methods
GOST R EN 13012-2012: Petrol filling stations. Construction and performance of automatic nozzles for use on fuel dispensers
GOST R EN 13617-1-2012: Petrol filling stations. Part 1. Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
GOST R EN 13617-2-2012: Petrol filling stations. Part 2. Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
GOST R EN 13617-3-2012: Petrol filling stations. Part 3. Safety requirements for construction and performance of shear valves
GOST R EN 13617-4-2012: Petrol filling stations. Part 4. Safety and environmental requirements for construction and performance of swivels for use on metering pumps and dispensers
GOST R IEC 60079-18-2012: Explosive atmospheres. Part 18. Equipment protection by encapsulation «m»
GOST R IEC 60079-25-2012: Explosive atmospheres. Part 25. Intrinsically safe systems
GOST R IEC 60079-27-2012: Explosive atmospheres. Part 27. Fieldbus intrinsically safe concept (FISCO)
GOST R IEC 60079-6-2012: Explosive atmospheres. Part 6. Equipment protection by oil-immersion «o»
GOST R IEC 62282-3-100-2014: Fuel cell technologies. Part 3-100. Stationary fuel cell power systems. Safety
GOST R ISO 13137-2016: Workplace air. Pumps for personal sampling of chemical and biological agents. Requirements and test methods
GOST R ISO 22734-2-2014: Hydrogen generators using water electrolysis process. Part 2. Residential applications
GOST R ISO 26142-2013: Hydrogen detection apparatus. Stationary applications
GOST R ISO/IEC 80079-34-2013: Explosive atmospheres. Part 34. Application of quality systems for equipment manufacture
Letter 19950/05-AA: About the application of the standards
Order 19950/05-AL: About the application of standards
PNST 16-2014: Mining equipment. Multipurpose safety systems for coal mines. Monitoring system of an aerological condition of excavations. General technical requirements and test methods
PNST 17-2014: Mining equipment. Multipurpose safety systems for coal mines. Systems for observation and notification of an accident. General technical requirements
PNST 18-2014: Mining equipment. Multipurpose safety systems for coal mines. System for searching and localization persons in accident. General technical requirements and test methods
R 78.36.050-2015: Selection and use of active opto-electronic detectors for blocking internal and external perimeters, doors, windows, windows and approaches to individual objects. Guidelines
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
