GOST R 55072-2012
ГОСТ Р 55072-2012
|
|
Fiberglass reinforced thermosetting plastic vessels. Specifications
Емкости из реактопластов, армированных стекловолокном. Технические условия
Status: Effective - Introduced for the first time. IUS 1-2015
This standard applies to pressure and non-pressure vessels made of thermo-reinforced plastics reinforced with fiberglass, lined and non-lined with a thermoplastic layer, operated at temperatures from minus 30 ° C to plus 110 ° C, intended for use in technological installations of petrochemical, oil refining, oil, gas and other related industries, transport construction, water disposal systems
Настоящий стандарт распространяется на напорные и безнапорные емкости из реактопластов, армированных стекловолокном, футерованные и не футерованные термопластичным слоем, эксплуатируемые при температуре от минус 30 °С до плюс 110 °С, предназначенные для применения в технологических установках нефтехимической, нефтеперерабатывающей, нефтяной, газовой и других смежных отраслях промышленности, транспортном строительстве, системах водоотведения
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/14/2012
SKU: RUSS74331
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Defects »
Welding regulations »
Main materials »
Polymers »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.020 Storage tanks for liquids and gases »
23.020.01 Storage tanks for liquids and gases in general »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.020 Storage tanks for liquids and gases »
23.020.01 Storage tanks for liquids and gases in general »
The Document References:
GN 2.1.6.1338-03: Maximum allowable concentrations (MACs) of pollutants in the air of residential areas
GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air
GOST 11262-80: Plastics. Tensile strength test method.
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.3.030-83: Occupation safety standards system. Safety requirements. Plastics processing
GOST 12.4.004-74: Filtering protective mask RPG-67
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 12.4.028-76: Respirators шб-1 "lepestok"
GOST 12.4.068-79: Occupational safety standards system. Dermatologic personal safety means. Classification and general requirements
GOST 12.4.121-83: Industrial filtering gas-masks
GOST 12015-66: Plastics. Preparation of test specimens from thermosetts. General requirements
GOST 12019-66: Plastics. Preparation of test specimens from thermoplasts. General requirements
GOST 12020-72: Plastics. Testing methods of plastics resistance to chemical substances
GOST 12423-66: Plastics. Standard atmospheres for conditioning and testing specimens
GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 14192-96: Cargo marking
GOST 16971-71: Welded joints of Plasticized VPC, unplasticized VPC and polyethylene. Quality control methods. Total requirements
GOST 17.1.3.13-86: Hydrosphere. General requirements for surface water protection against pollution
GOST 17.2.3.01-86: Nature protection. Atmosphere. Air quality control regulations for populated areas
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 17.4.3.04-85: Nature protection. Soils. General requirements for contamination control and protection
GOST 20010-93: Industrial rubber gloves
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 26277-84: Plastics. Preparation of test specimens by machining
GOST 2768-84: Acetone technical. Specifications
GOST 28840-90: Machines for tension, compression and bending tests of materials
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4651-82: Plastics. Compression test method
GOST 6433.3-71: Solid electrical insulating materials. Methods for evaluation of electrical strength at a. c. voltage at power (50 Hz) frequency and d. c. voltage
GOST R 12.1.019-2009: Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection
GOST R 50303-92: Reinforced plastics based on unsaturated polyester resins. Determination of residual styrene monomer content
GOST R 52108-2003: Resources saving. Waste treatment. Basic principles
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 53411-2009: Saw blades for metal cutting. Specifications
GOST R 54559-2011: Fibre reinforced thermosetting plastic pipes and parts of pipelines. Terms and definitions
SanPiN 2.1.7.1322-03: Hygienic requirements regarding dumping and decontamination of industrial and consumable waste
The Document is Referenced By:
ODM 218.8.008-2017: Guidelines for the use of treatment facilities made of polymer composite materials in the road sector
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
SP 32.13330.2012: Sewerage. Pipelines and wastewater treatment plants
SP 32.13330.2018: Sewerage. Outdoor networks and facilities
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.